• 한국농공학회지
• /
• 제20권2호
• /
• pp.4695-4707
• /
• 1978

The objeative of this study is to study how to rapidly convert tidal land into cultivable land. The study of a rapid, reasonable desalinization method is conducted at Namyang tidal land which represents soil texture of tidal lands along the south west costa larea of Korea. Therefore, Researches were made at many Pilots in order to find a way of high efficiency of leaching with simpler facilities and cheaper costs. The results of study are briefly summarized as follaws: 1. Subdrainage efficieny is 35%. This is a Poorly drained area, and needs longer leaching desalinization period. 2. The efficieny of desalinization in P.V.C 16 meters plot is the same as that of mole drainage 2 meters plot. P.V.C 4 meters plot has desalinization effect as much as two times compared to P.V.C 16 meters plot. 3. Because the soil texture is silty-clay, desalinization in non-treated plot of sub-drainage and surface drainage desalinization take three times longer period in comparision with P.V.C 4 meters plot. 4. As to the desalinization rate of soluble salt in the soil, the efficieny of desalinization of the topsoil in P.V.C plots was 50% higher than that of mole drainage plot and about 170% higher than that of non-treated plot. In the deep soil salt accumulation at topsoil was observed in non-treated and mole drainage plots, but efficiency in P.V.C polt is about 40 times as high as that of mole drainage and non-treated plot. 5. As to the results of use gypsum and lime as sub-drainage soil improver, gypsum was 60% more efficieny than lime in the continuously inundated plot and 44% in the intermittently inundated plot. The efficieny of gypsum and lime in the intermittently flooded plot is 35% and 42% higher than that of continuously flooded plot reapeaticee1y.

• 한국병원경영학회지
• /
• 제4권2호
• /
• pp.305-329
• /
• 1999

Financial ratio indicators of the 46 sample hospitals provided by the Korea Health Industry Development Institute, together with the survey data responded by the 57 sample hospitals, were analysed to identify the characteristics of the red-figured hospitals' financial structure, financial operational efficiency and management decision-making behavior, The financial characteristics identified through the analysis include high dependency to liabilities, high salary expenses and overhead costs, low profitability of the unduly large amount of fixed assets, and low managerial efficieny of inventory. The hospitals, in face of the IMF economic impasse, took the necessary decision-making and counter measures to cut down salary expenses, to increase the number of patient and medical revenue, and to reduce investment to fixed assets. Based on these findings this study suggested that the hospitals should take more active cost containment measures, financial structural reorganization, and developoment of the strategies that can contribute to increase of the number of patient and medical revenue and that do not. require much capital funds.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.351-357
• /
• 2010

이 논문은 RFID와 같은 무선통신 시스템에 적용할 수 있는 고 효율을 유지하는 적응형 E급 증폭기를 제안하였다. 스위치 모드의 이 증폭기는 출력의 공진기를 제어하기 위하여 MCU를 사용하였고, 이에 따라서 입력 주파수 변화에 공진기 주파수를 적용하여 고 효율을 유지하도록 하였다. 이러한 적응형 E급 증폭기의 동작을 보이기 위해서 중심 주파수 450 MHz. 대역폭은 100 MHz인 증폭기를 제작하여 이 주파수 구간에서는 60% 이상의 효율을 유지하였고, 최대 효율은 74.8%를 얻었다.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.41-50
• /
• 1995

A state-of-the-arts GaAs power metal semiconductor field effect transistor (MESFET) for 3.3V operation digital hand-held phone at 900 MHz has been developed for the first time, The FET was fabricated using a low-high doped structures grown by molecular beam epitaxy (MBE). The fabricated MESFETs with a gate width of 16 mm and a gate length of 0.8 .mu.m shows a saturated drain current (Idss) of 4.2A and a transconductance (Gm) of around 1700mS at a gate bias of -2.1V, corresponding to 10% Idss. The gate-to-drain breakdown voltage is measured to be 28 V. The rf characteristics of the MESFET tested at a drain bias of 3.3 V and a frequencyof 900 MHz are the output power of 32.3 dBm, the power added efficiency of 68%, and the third-ordr intercept point of 49.5 dBm. The power MESFET developed in this work is expected to be useful as a power amplifying device for digital hand-held phone because the high linear gain can deliver a high power added efficiency in the linear operation region of output power and the high third-order intercept point can reduce the third-order inter modulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.172-176
• /
• 1995

Schemes to trap weakly absorbed light into the cell have played an important role in improving the efficiency of both amorphous and crystlline silicon solar cells. One class of scheme relies on randomizing the direction of light within the cell by use of Lambertian(diffuse)surfaces. A second class of scheme relies on the use fo well defined geometrical features to control the direction of light wihin the cell, Widly used geometrical features in crystalline silicon solar cells are the square based pyramids and V-shaped grooves formed in (100) orientated surfaces by intersecting(III) crystallographic planes exposed by anisotropic etching. 18.5% conversion efficiency of Buried Contact Solar Cell with pyramidally textured surface has been achieved. 18.5% efficiency of silicon solar cell is one the highest record in the world The efficieny of cell without textured surface was 16.6%, When adapting textured surface to the Cell, the efficiency has been improved over 12%.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권11호
• /
• pp.730-734
• /
• 1999

In this study, it is the purpose to develope a cheap and compact repetitively pulsed $CO_2$ laser with pulse repetition rate range of 180 Hz. We used a SCR switched power supply as a high voltage pulsed supply, which is cheap and simple comparing to others. PIC one-chip microprocessor was used for precise control of a laser power supply on the control part. And the laser cavity was fabricated as an axial and water cooled type. The laser performance characteristics as various parameters, such as pulse repetition rate and gas pressure have been investigated. The experiment was done under the condition of total pressure of $CO_2, N_2$ and He from 4 Torr to 16 Torr and pulse repetition rate from 4 Hz to 180 Hz. As a result, the maximum average output was about 19.6W at the total pressure of 12 Torr and the pulse repetition rate of 180Hz.

• 한국가스학회지
• /
• 제24권6호
• /
• pp.1-10
• /
• 2020

반응성 조정 압축착화 (Reactivity Controlled Compression Ignition, RCCI) 연소는 착화원인 디젤 연료를 압축 행정 중 이른 시점에 미리 분사하여, 공기와 미리 섞여 들어온 천연가스 연료뿐만 아니라 디젤 연료 자체도 미리 연소 전에 공기와 혼합하여 착화를 이루는 전체 예혼합 혼소(Dual-fuel combustion) 방식의 일종이다. 따라서 기존의 혼소 방식 중에서도 RCCI 연소는 질소산화물(Nitrogen Oxides, NOx) 및 매연(Smoke)을 획기적으로 줄일 수 있고, 또한 높은 열효율을 유지할 수 있는 장점을 지니고 있다. 특히 연소 중 NOx의 발생은 연소 온도와 국부적인 당량비에 관계된 상황에서 당량비를 낮추기 위해 예혼합율을 높이는 시도뿐만 아니라, 연소 온도 감소를 위한 배기재순환(Exhuast Gas Recirculation, EGR)을 적용하는 것이 효과적이다. 그러나 배기재순환은 대개의 경우 터보차저의 압축기 전단에서 추출하는 HP-EGR(High Pressure-EGR) 방식을 적용하는 경우가 많으므로, EGR율을 높일 경우 터빈으로 공급되는 배기의 양이 줄어 배기 엔탈피 감소로 인해 과급이 줄어드는 악영향을 초래할 수 있다. 따라서 본 연구에서는 서로 다른 두 운전조건에서 천연가스-디젤 RCCI 연소를 시행할 때, EGR율 변화에 따른 엔진 시스템의 제동 출력 및 열효율의 변화에 대하여 실험적으로 분석하였다. 실험 조건은 1,200 rpm/29 kW 수준의 조건과 1,800 rpm/90 kW 이하 조건에서 수행하였으며 NOx와 smoke의 배출조건은 Tier-4 final 배기규제를 기준으로 삼았으며 엔진의 내구성을 고려하여 최고 연소압력은 160 bar를 넘지 않게 제어하였다. 그 결과 1,200 rpm/29 kW 조건에서는 EGR율을 4에서 30 %로 높이더라도 출력 및 열효율의 변화는 미미하였으나, 1,800 rpm 조건에서는 EGR율을 4에서 28 %로 증가할 경우 최대 과급 압력이 2.3에서 1.8 bar로, 최고 출력은 90에서 65 kW로, 열효율은 37에서 33 %로 감소함을 알 수 있었다. 따라서 효과적인 EGR공급을 위해서는 현재 압축기 전단에서 추출하는 EGR을 후단에서 추출하는 LP-EGR (Low Pressure EGR) 시스템이 효과적일 수 있음을 시사한다.