• 한국해안·해양공학회논문집
• /
• 제35권3호
• /
• pp.57-66
• /
• 2023

본 논문에서는 해상풍력발전단지의 경제성을 파악하고자 발전단가 측면에서 해상풍력 지지구조물 형식 및 시공 방법에 따른 균등화발전비용(levelized cost of energy, LCOE)의 차이를 분석하고 LCOE의 주요 구성 요소에 따른 민감도 분석을 실시하였다. 연구대상 현장으로 국내 서남해 해상풍력실증단지를 선정하였으며, 설치 기수에 따른 공사비를 분석하였다. LCOE 민감도 분석 결과 설비이용률, 터빈 관련 비용, 가중평균자본비용 그리고 BOS(balance of system) 관련 비용의 순서로 LCOE에 대한 민감도가 높은 것으로 나타났다. 아울러 국내 해상풍력 지지구조물로 주로 적용되었던 포스트파일링(post-piling) 재킷 공법을 기본안으로 선정하여 공사비를 산출한 후, 시공 방법을 프리파일링(pre-piling)으로 변경한 재킷 공법과 트라이포드(tripod) 공법의 초기투자비용을 비교하였다. 그에 따른 LCOE를 분석한 결과, 프리파일링 재킷 공법의 경우 고가의 템플릿이 필요하지만, 강재 소모량이 적고, 설치규모가 대형화할수록 시공 기간이 단축되어 전체 공사비 및 LCOE가 낮아지며 경제성이 향상되는 것을 확인하였다.

• 대한간호학회지
• /
• 제10권1호
• /
• pp.41-55
• /
• 1980

The medical care insurance system, being put into practice nearly for three years, seem to have brought about some considerable problems as serious for the government as to consider a revision of that system. As one of the most serious problems of present system, the treatment cost of insurance patients is so remarkably low in comparison with than of non-insurance cases that normal operation of hospitals is threatened and care services of low quality are induced. The researcher carried out this survey to analyze and bring to light several aspects of treatment cost of non-insurance patients as a material for a re-assessment of the cost of insurance cases which shows a a considerable difference in amount at the standpoint of hospitals with than of non-insurance cases and further, hoping the significant blind spot of present insurance system(that is, the absence of regulations' for cost assessment by patterns or types of health care treatment) will be mended in near future. The survey was carried out with the treatment invoice sheets of total 902 in-hospital Patients of a general hospital in Seoul during the period of the 2 nd quarter of the year(1979). Among total 902 patients, 694 cases were used for analysis, because those disease or syndromes shared by less than 10% of the patients were put aside before procession. The data were analyzed by kinds or types of diseases, demographic characteristics of patients, hospitalization patterns, types of nursing treatment, etc. The result of analysis was as follows 1. Among all the non-insurance cases, those who received one or more kinds of nursing treatment mounted up to 96. 7 ％. The invoice issue frequency per person was 7.2 times, while that frequency per day for a person was 0.8, : the treatment cosr per person was ￦22,650 while its daily average was ￦2,430, due to the average 9.3 in-hospital days per person. 2. As to the nursing treatment types by the demographic characteristics of patients and hospitalization patterns. a. The unit cost female patients was generally more expensive them that of males, and independent nursing service was more given than other types of treatment. As to age, higher age groups received independent nursing service most, while the youngest group received instrumental and integrated nursing services. b. As to room grade, the unit cost of I.C.U. cases was the highest : and the cast of private room patients was higher than that of public room patients. By in-hospital days, the curve of function showed L. type : that is, the longer stay, the lower function. 3. State of treatment types by kinds of disease were ; a. Dependent nursing service showed comparatively high availability in surgical and neurologic disease and independent nursing service was most received by medical, obstetrical and urological patients, while instrumental and integrated services were most available for respiratory disease and obstetrical and neurologic diseases next. b. The invoice issue frequency per day for a patient was highest in obstetrical disease 3.8 times, and the unit cost(per one invoice sheet) was also highest in obstertrical disease(￦10,880) and next in neurologic cases(￦ 4,690 ). 4. As to the pertained departments. a. Cost amount per person was highest in department of Psychiatries daily cost was highest in obstetrical cases : while the invoice issue frequency was highest in obstetrics and next in pediatrics. b. In departments in need of surgical operation, dependent nursing care was highly availabl : while in internal medicine and obstetrics, independent service was higher. Psychiatrics showed the highest the of integrate nursing while pediatrics and obstetrics higher of instrumental services. The variation co-efficien of treatment cost came out to be relatively in high in special surgery, opthalmology and internal medicine. 5. State of treatment cost by types of nursing behavior was. a. The average frequency of invoice issue was 3.5 (times). Among the type four types of treatment, instrumetal service (4.3) and independent nursing behavior(3.9) showed higher frequency than average respectively. But as to unit cost (per invoice). dependent (￦5,200) and integrated (￦5,340) nursing care services were higher than average and considerably higher than the other two types. b. In repect patient distribution. independent nursing behavior(80.3% ) was the highest and depend ent nursing (31.7% ) the lowest. The variation co-efficient of treatment cost appeared highest in dependent nursing be havior as a whole, and among that, doctor's diagnosis showed the highest coefficient value (100.7). In conclusion, the variaty of treatment cost(treatment itself ) by various characteristics and treatment types pro- that treatment various sort of patients and treatment cost of various types of nursing behavior cannot be uniform. Therefore, to attain the equalization of health care service and its cost both for insurant and non-insurant patients, a more specific provision for assessment of cost should be added to the present medical care insurance system and, in addition, the cost of nursing treatment is desired to be inserted into the treatment invoice.

• 지능정보연구
• /
• 제20권2호
• /
• pp.109-122
• /
• 2014

현재 우리는 소셜 네트워크 서비스(Social Network Service, 이하 SNS) 상에서 수많은 데이터를 만들어 내고 있다. 특히, 모바일 기기와 SNS의 결합은 과거와는 비교할 수 없는 대량의 데이터를 생성하면서 사회적으로도 큰 영향을 미치고 있다. 이렇게 방대한 SNS 데이터 안에서 사람들이 많이 이야기하는 이슈를 찾아낼 수 있다면 이 정보는 사회 전반에 걸쳐 새로운 가치 창출을 위한 중요한 원천으로 활용될 수 있다. 본 연구는 이러한 SNS 빅데이터 분석에 대한 요구에 부응하기 위해, 트위터 데이터를 활용하여 트위터 상에서 어떤 이슈가 있었는지 추출하고 이를 웹 상에서 시각화 하는 트위터이슈 트래킹 시스템 TITS(Twitter Issue Tracking System)를 설계하고 구축 하였다. TITS는 1) 일별 순위에 따른 토픽 키워드 집합 제공 2) 토픽의 한달 간 일별 시계열 그래프 시각화 3) 토픽으로서의 중요도를 점수와 빈도수에 따라 Treemap으로 제공 4) 키워드 검색을 통한 키워드의 한달 간 일별 시계열 그래프 시각화의 기능을 갖는다. 본 연구는 SNS 상에서 실시간으로 발생하는 빅데이터를 Open Source인 Hadoop과 MongoDB를 활용하여 분석하였고, 이는 빅데이터의 실시간 처리가 점점 중요해지고 있는 현재 매우 주요한 방법론을 제시한다. 둘째, 문헌정보학 분야뿐만 아니라 다양한 연구 영역에서 사용하고 있는 토픽 모델링 기법을 실제 트위터 데이터에 적용하여 스토리텔링과 시계열 분석 측면에서 유용성을 확인할 수 있었다. 셋째, 연구 실험을 바탕으로 시각화와 웹 시스템 구축을 통해 실제 사용 가능한 시스템으로 구현하였다. 이를 통해 소셜미디어에서 생성되는 사회적 트렌드를 마이닝하여 데이터 분석을 통한 의미 있는 정보를 제공하는 실제적인 방법을 제시할 수 있었다는 점에서 주요한 의의를 갖는다. 본 연구는 JSON(JavaScript Object Notation) 파일 포맷의 1억 5천만개 가량의 2013년 3월 한국어 트위터 데이터를 실험 대상으로 한다.

• 한국작물학회지
• /
• 제53권3호
• /
• pp.251-255
• /
• 2008

상위 씨감자 순환식 심지양액재배에 있어서 송이의 배지 재료로서의 이용 가능성과 알맞은 재식밀도를 구명하고자 송이 + 피트모스(1:2, v/v)와 펄라이트 + 피트모스(1:2, v/v) 배지에 대지 소괴경($7.0{\pm}0.2\;g$)을 상자($0.16\;m^2$)당 각각 3, 6, 9, 12, 15주(19, 38, 56, 76, $95/m^2$)를 심어 생육 및 수량을 조사한 결과를 요약하면 다음과 같다. 1. 조사된 모든 형질에 있어서 배지종류와 재식밀도간 유의한 상호작용이 없었다. 생육불량주가 상자당 3주$\sim$12주재식구에서 $8.3{\sim}14$이었으나 15주재식구에서는 25.8%이었다. 2. 줄기 및 잎의 길이, 주당 경수 등은 배지종류에 따른 차이가 없었으나 $m^2$당 ${\geq}5\;g$괴경수 및 괴경수량은 송이혼용배지에 비해 펄라이트혼용배지에서는 각각 21% 및 32% 증가되었다. 3. 재식밀도가 상자당 3주에서 9주로 증가됨에 따라 줄기 및 잎의 길이가 작아졌으나 더 밀식될 때에도 이상 감소되지 않았으나 주당 괴경수 및 괴경수량은 밀식할수록 감소되었다. 4. 재식밀도가 상자당 3주에서 15주로 증가됨에 따라 $m^2$ 당 ${\geq}5\;g$괴경수 및 괴경수량은 각각 101개와 6.3 kg에서 269개와 11.6 kg으로 증가되었다. 5. 소괴경 심지양액재배 시 펄라이트 + 피트모스 배지가 보다 적합하며, 생육불량개체비율, $m^2$당 ${\geq}5\;g$괴경수과 괴경수량 등을 고려한 알맞은 재식밀도는 소괴경이 충분할 경우 $m^2$당 76주 정도, 부족할 경우 56주 정도로 판단된다.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.635-643
• /
• 2007

국내에 고해상도 지도제작용 항공디지털카메라 영상의 도입 및 공급이 현실화됨에 따라 항공디지털카메라 영상을 이용한 수치지도의 제작 및 갱신에 많은 관심이 모아지고 있다. 본 연구는 푸쉬부룸 항공디지털카메라 영상을 이용하여 기존의 1/1,000 수치지도의 갱신방법을 제시하고자 하였다. GPS측량성과를 이용하여 기하보정을 수행하고, 수치도화를 위해 수치사진측량시스템을 이용하였다. 수치도화는 건물 및 도로를 묘사하였고, GPS측량성과를 이용하여 절대위치정확도 평가와 해석도화에 의해 제작된 수치지도를 이용하여 상대위치정확도 평가를 수행하였다. 절대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.172m,\;{\pm}0.127m$, 평균거리오차는 0.208m, 상대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.238m,\;{\pm}0.281m$, 평균거리오차는 0.337m로 나타났다. 따라서, 본 연구에서 제시한 항공디지털카메라 영상을 이용한 수치지도 갱신방법은 국토지리정보원 규정의 허용오차 이내였으므로, 향후 국가기본도 제작은 물론 지자체의 GIS사업 및 다양한 분야에 활용할 수 있다.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.223-229
• /
• 2013

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is a power generation system to convert chemical energy of fuels and oxidants to electricity directly by electrochemical reactions. As a catalyst support for PEMFCs, carbon black has been generally used due to its large surface area and high electrical conductivity. However, under certain circumstances (start up/shut down, fuel starvation, ice formation etc.), carbon supports are subjected to serve corrosion in the presence of water. Therefore, it would be desirable to switch carbon supports to corrosion-resistive support materials such as metal oxide. $TiO_2$ has been attractive as a support with its stability in fuel cell operation atmosphere, low cost, commercial availability, and the ease to control size and structure. However, low electrical conductivity of $TiO_2$ still inhibits its application to catalyst support for PEMFCs. In this paper, to explore feasibility of $TiO_2$ as a catalyst support for PEMFCs, $TiO_2$ nanofibers were synthesized by electrospinning and calcinated at 600, 700, 800 and $900^{\circ}C$. Effects of calcination temperature on crystal structure and electrical conductivity of electrospun $TiO_2$ nanofibers were examined. Electrical conductivity of $TiO_2$ nanofibers increased significantly with increasing calcination temperature from $600^{\circ}C$ to $700^{\circ}C$ and then increased gradually with increasing the calcination temperature from $700^{\circ}C$ to $900^{\circ}C$. It was revealed that the remarkable increase in electrical conductivity could be attributed to phase transition of $TiO_2$ nanofibers from anatase to rutile at the temperature range from $600^{\circ}C$ to $700^{\circ}C$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• 대한임상독성학회지
• /
• 제5권1호
• /
• pp.27-35
• /
• 2007

Purpose: Organophosphate (OP) compounds insecticides are the most commonly associated with serious human toxicity all over the world. The aim of this study was to identify sociocultural factors that contribute to high incidence of pure OP poisoning and prevent OP poisoning in order to reduce the factors responsible for deaths in South Korea. Methods: This is the 38 multi-centers survey and prospective study of pure OP poisoning by structural reporting system and hospital records from August 2005 to July 2006. 238 patients with acute pure OP poisoning were enrolled. We collected patient information regarding poisoning, clinical, and demographic features. Results: The mean age was $55.32{\pm}17.3$ years old. The most frequent site of exposure was their own residence(85.7%). Frequent compounds involving pure OP poisoning were dichlorvos(22.7%), methidathion(8.4%), and phosphamidon(6.7%). Intentional poisoning was 77.9%. The most frequently route of exposure was ingestion(94.5%). The mean arrival time to hospital after poisoning was 12.7 hours and mean hospitalization duration was 12.9 days. 2-PAM was administered to 101 patients in mean doses of 6.3 g/day intravenously. Atropine was administered to 81 patients in mean doses of 74.6 mg/day (maximal 910 mg/day). The presence of lower level of GCS score, respiratory complications, hypotension, acute renal failure, and serious dysrhythmia was associated with serious and fatal poisoning. Overall final mortality in pure OP poisoning was 9.7%(23/238). Conclusion: This study highlights the problem of pure OP poisoning in South Korea as a basic national survey. Futhermore this might help the establishment of strict policies availability of OP and the statistics of OP poison exposure in South Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.223-229
• /
• 2015

표면개질이란 재료 본연의 특성만으로 원하는 성능과 기능을 발휘할 수 없는 때 기재 표면에 열에너지, 응력 등을 부가하여 새로운 표면층을 형성하는 방법으로, 소지금속의 방청, 외관미화, 내마모성, 전기절연, 전기전도성 부여 등의 폭넓은 목적을 달성시키고자 하는 일련의 조작을 말한다. 이러한 표면개질에는 도금, 화성처리, 도장, 라이닝, 코팅, 표면 경화 등이 있다. 그 중 전해액을 이용한 표면개질은 오래전부터 공업적으로 활용하기 위한 연구가 많이 이루어져 왔으며, 원가절감과 높은 생산성, 그리고 복잡한 형상에 대한 적용이 가능해 여러 분야에서 각광받고 있다. 따라서 본 연구에서는 5083-O 알루미늄 합금을 이용해 해양환경에서 우수한 내식성을 보유할 수 있는 최적의 표면개질 전해액 온도를 선정하고자 전기화학 실험을 실시하였다. 실험 결과, 표면개질을 실시한 경우가 현저히 낮은 부식전류밀도를 나타냈으며, 특히 불완전 기공이 생성된 $5^{\circ}C$를 제외하고 전해액 온도가 증가함에 따라 감소하는 결과를 나타냈다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.383-387
• /
• 2015

현대인들의 불규칙한 생활과 서구화된 식습관에 의해 대장 및 직장 질환이 증가하고 있는 추세로, 특히 직장암은 전체 대장암의 50%를 차지하고 있다. 초기 직장암의 경우 표면으로 돌출되는 부분이 없으므로 초음파로 조직 내부를 보지 않으면 직장 농양으로 오진하는 오류를 범하기도 한다. 그러나 초음파 진단을 하더라도 직장암의 병기에 따라 농양과 육안으로 구별이 어려운 경우가 있기 때문에 보다 정확한 진단이 필요하다. 그러므로 본 연구에서는 직장암과 농양 영상에 대한 컴퓨터 알고리즘을 이용하여 정량적인 분석을 하였다. GLCM을 적용하여 정상 20증례와 농양, 직장암 각 20증례를 분석영역($50{\times}50$ 픽셀)으로 설정하고, 각 영상에서 Autocorrelation, Max probability, Sum average, Sum variance 4가지 파라미터를 비교하여 분석하였다. 결과적으로 Autocorrelation, Max probability, Sum variance 3개의 파라미터에서는 100%, Sum average 파라미터에서는 암 95%, 농양에서 90% 이상의 높은 병변 질감 검출 효율이 나타났다. 이러한 파라미터들이 직장에서의 정상조직, 농양조직, 암조직 간의 판별의 기준으로 가치가 있다고 사료된다. 임상에서의 활용정도에 따라 컴퓨터 보조진단으로서의 충분한 유용성을 볼 수 있을 것이다.