• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2617-2618
• /
• 2002

The key point of this design can offer good picture resolution and a high-speed color STN decode. We maximize a combination processing of the color signal. Therefore, there is a color implementation at the natural. The age of the multimedia comes, so the color is considered important and wide. To be necessary a color implementation have become the importance which picture resolution is clean and low price of the liquid display TFT occupied greater part of the liquid display. But TFT could not consist low price realization. This research is a color implementation of STN at low price, design good picture resolution decode for optimum an limit of upside with frequency range maximizing and can reply in the high-speed by multidivision method. As a result, we design optimum of the STN decode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.525-532
• /
• 2005

In this paper, we propose and present implementation results of a high-speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix-4, center to top, parallel decoding, and early-stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real-time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix-4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field-programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.133-139
• /
• 2017

Vehicles have increasingly evolved and become intelligent with convergence of information and communications technologies (ICT). Vehicle communications (VC) has become one of the major necessities for intelligent vehicles. However, VC suffers from serious security problems that hinder its commercialization. Hence, the IEEE 1609 Wireless Access Vehicular Environment (WAVE) protocol defines a security service for VC. This service includes Advanced Encryption Standard-Counter with CBC-MAC (AES-CCM) for data encryption in VC. A high-speed AES-CCM crypto module is necessary, because VC requires a fast communication rate between vehicles. In this study, we propose and implement an efficient AES-CCM hardware architecture for high-speed VC. First, we propose a 32-bit substitution table (S_Box) to reduce the AES module latency. Second, we employ key box register files to save key expansion results. Third, we save the input and processed data to internal register files for secure encryption and to secure data from external attacks. Finally, we design a parallel architecture for both cipher block chaining message authentication code (CBC-MAC) and the counter module in AES-CCM to improve performance. For implementation of the field programmable gate array (FPGA) hardware, we use a Xilinx Virtex-5 FPGA chip. The entire operation of the AES-CCM module is validated by timing simulations in Xilinx ISE at a speed of 166.2 MHz.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.6
• /
• pp.317-328
• /
• 2016

Over the past few decades, CMOS current comparators have been used in a wide range of applications, including analogue circuits, MVL (multiple-valued logic) circuits, and various electronic products. A current comparator is generally used in an ADC (analog-to-digital) converter of sensors and similar devices, and several techniques and approaches have been implemented to design the current comparator to improve performance. To this end, this paper presents a bibliographical survey of recently-published research on different current comparator topologies for low-power and high-speed applications. Moreover, several aspects of the CMOS current comparator are discussed regarding the design implementation, parameters, and performance comparison in terms of the power dissipation and operational speed. This review will serve as a comparative study and reference for researchers working on CMOS current comparators in low-power and high-speed applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.450-456
• /
• 2005

In this paper, we propose a high-speed turbo decoding algorithm and present results of its implementation. The latency caused by (de)interleaving and iterative decoding in conventional MAP turbo decoder can be dramatically reduced with the proposed scheme. The main cause of the time reduction is to use radix-4, center to top, and parallel decoding algorithm. The reduced latency makes it possible to use turbo decoder as a FEC scheme in the real-time wireless communication services. However the proposed scheme costs slight degradation in BER performance because the effective interleaver size in radix-4 is reduced to an half of that in conventional method. To ensure the time reduction, we implemented the proposed scheme on a FPGA chip and compared with conventional one in terms of decoding speed. The decoding speed of the proposed scheme is faster than conventional one at least by 5 times for a single iteration of turbo decoding.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.3
• /
• pp.274-279
• /
• 2005

For high-speed fuzzy control systems, an important problem is the improvement of speed for the fuzzy inference, particularly in the consequent part and the defuzzification stage. This paper introduces an algorithm to map real values of the fuzzy membership functions in the consequent part onto an integer grid, as well as a method of eliminating the unnecessary operations of the zero items in the defuzzification stage, allowing a center of gravity method to be implemented with only integer additions and one integer division. A VHDL implementation of the system is presented. The proposed system shows approximately an order of magnitude increase in speed as compared with conventional methods while introducing only a minimal error and can be used in many fuzzy controller applications.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.221-225
• /
• 2000

We designed asynchronous event logic library with 0.25$\mu\textrm{m}$ CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6㎓. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about 1.1mm ${\times}$ 1.1mm.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.945-948
• /
• 2005

In wireless and handheld platforms area, performance, power and cost are key metrics for product success. This is driving increasing levels of on-chip integration in state-of-the-art application processors. The purpose of this project is to optimize and design the energy-efficient embedded system that properly displays video and audio in real time. The requirements are for the media player to be capable of decoding real-time streaming video and audio with the least possible energy consumption for a variety of different clips at different resolutions. We implemented this Linux based multimedia player on Intel's PXA27x platform.