• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1108-1110
• /
• 1995

This paper presents a balanced CMOS complementary folded cascode OP-AMP topology that achieves improved DC gain using the gain boosting technique, a high unity-gain frequency and improved slew rate using the CMOS complementary cascode structure and a high PSRR using the balanced output stage. Bode-plot measurements of a balanced CMOS complementary folded cascode OP-AMP show a DC gain of 80dB, a unity-gain frequency of 110MHz and a slew rate of $274V/{\mu}s$(1pF load). This balanced CMOS complementary folded cascode OP-AMP is well suited for high frequency analog signal processing applications.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.376-381
• /
• 2014

We present a CMOS rail-to-rail class-AB amplifier using dynamic current biasing to improve the delay response of the error amplifier in a low-dropout (LDO) regulator, which is a building block for a wireless power transfer receiver. The response time of conventional error amplifiers deteriorates by slewing due to parasitic capacitance generated at the pass transistor of the LDO regulator. To enhance slewing, an error amplifier with dynamic current biasing was devised. The LDO regulator with the proposed error amplifier was fabricated in a $0.35-{\mu}m$ high-voltage BCDMOS process. We obtained an output voltage of 4 V with a range of input voltages between 4.7 V and 7 V and an output current of up to 212 mA. The settling time during line transient was measured as $9{\mu}s$ for an input variation of 4.7-6 V. In addition, an output capacitor of 100 pF was realized on chip integration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.598-599
• /
• 2017

In motor application, High efficiency is important. So Design engineer select small gate resistor for lower switching. But There is side effect with small gate resistor. It makes large dv/dt and system request large EMI filter. It makes price increase. This paper introduce about gate drive IC which have solution both of lower loss and EMI issue.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1869-1871
• /
• 1998

In this paper, we designed and fabricated a fast switching system for high power pulse. This system consists of a voltage conversion circuit, high voltage charging circuit, trigger circuit, and discharging circuit. Especially discharging line is designed by strip-line for low inductance and resistance. The experimental result is that current slew rate of the system is 6.67kA/86ns and this result is fully qualified for initiating EBW or EFI

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.133-136
• /
• 2000

A new Op-Amp output buffer is presented for driving large-size LCD panels. The proposed Op-Amp is designed by combining a common source and a common drain amplifier to have a high slew rate and to minimize the quiescent current. The proposed circuits are simulated in a high-voltage 0.6${\mu}{\textrm}{m}$ CMOS process, dissipates only 20${\mu}{\textrm}{m}$ static current, and have 83dB open-loop DC gain and 60$^{\circ}$phase margin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1521-1524
• /
• 1987

The performance of SCF can be improved with the Op-AMP which has the properties of high speed, large slew rate, and lower power dissipation. The OP-AMP used for SCF will be presented. For illustration, using this OP-AMP 5-th order LPF is designed.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.47-50
• /
• 2000

We have constructed a multi-channel SQUID magnetometer system. The system is designed to operate normally with 10 high temperature direct coupled SQUIDs. The main features of the system include a remote control by serial communication, low noise with wide bandwidth and high slew rate by several MHz modulation, signal conditioning and calibration by digital signal processing.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권5_6호
• /
• pp.265-272
• /
• 2003

집적회로 시스템이 고집적화 됨에 따라 interconnection에서 인접한 두 신호선 에서 발생하는 cross-coupling capacitance에 의한 혼선잡음 때문에 logic fault나 delay fault가 일어날 수 있다. 현재 산업체에서 혼선잡음문제를 미리 발견하고 예방하는 방법이 없어서 모든 설계가 끝난 후 일일이 손으로 확인을 하고 사양을 만족하지 못하는 경우에는 설계수정을 하는 경우가 많았다 본 논문에서는 두 신호선간의 거리, 입력신호의 slew rate, 신호선의 두께, 신호선의 길이가 혼선잡음에 미치는 영향을 분석하고, 혼선잡음을 발생시키는 여러 요소에 대한 해결방안을 정리하여 제시하였고, noise에 대한 값을 table로 정형화하여 설계 최적화를 쉽게 수행할 수 있도록 하였다.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.506-513
• /
• 2015

본 논문에서는 외부 커패시터가 없는 low-dropout (LDO) 레귤레이터를 설계하였으며, 대기 전류는 $4.5{\mu}A$ 이다. 제안하는 LDO 레귤레이터는 정밀한 로드 레귤레이션과 빠른 응답 속도를 만족하기 위해 두 개의 증폭기를 사용 하였고, 높은 이득을 갖는 증폭기와 빠른 속도 및 높은 슬루율을 가지는 증폭기로 구성 되어 있다. 이와 함께 패스 트랜지스터의 게이트에 존재하는 큰 기생 커패시터에 전류를 빠르게 충 방전시키기 위해, 전류 부스팅 회로를 추가하였다. 이를 통해 부하 전류 변화 시 응답 시간을 향상 시키게 된다. 설계된 회로는 $0.11-{\mu}m$ CMOS 공정으로 제작되었다. 최대 200mA 의 부하 전류를 구동할 수 있으며, 출력 전압 변동은 260mV, 회복 시간은 $0.8{\mu}s$ 을 측정하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.