• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.457-468
• /
• 2020

Problems arising during pile design works for plant construction, civil and architecture work are mostly come from uncertainty of geotechnical characteristics. In particular, obtaining the N-value measured through the Standard Penetration Test (SPT) is the most important data. However, it is difficult to obtain N-value by drilling investigation throughout the all target area. There are many constraints such as licensing, time, cost, equipment access and residential complaints etc. it is impossible to obtain geotechnical characteristics through drilling investigation within a short bidding period in overseas. The geotechnical characteristics at non-drilling investigation points are usually determined by the engineer's empirical judgment, which can leads to errors in pile design and quantity calculation causing construction delay and cost increase. It would be possible to overcome this problem if N-value could be predicted at the non-drilling investigation points using limited minimum drilling investigation data. This study was conducted to predicted the N-value using an Artificial Neural Network (ANN) which one of the Artificial intelligence (AI) method. An Artificial Neural Network treats a limited amount of geotechnical characteristics as a biological logic process, providing more reliable results for input variables. The purpose of this study is to predict N-value at the non-drilling investigation points through patterns which is studied by multi-layer perceptron and error back-propagation algorithms using the minimum geotechnical data. It has been reviewed the reliability of the values that predicted by AI method compared to the measured values, and we were able to confirm the high reliability as a result. To solving geotechnical uncertainty, we will perform sensitivity analysis of input variables to increase learning effect in next steps and it may need some technical update of program. We hope that our study will be helpful to design works in the future.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.361-370
• /
• 2004

All active nudes which have no physically direct connection with each other in If network must be able to compose and manage network topology Informations. Besides one active program can be performed by the active nodes when every active packet for this program is transmitted without any loss of packets. Also the active packets should be transmitted effectively to minimize the transmission delay and securely from threatens. In this thesis, the discovery scheme of active nodes is adapted for active nodes in IP networks to compose and manage the topology information. The scheme for the efficient, reliable and secure transmission of active packets is also proposed. The sequence number is assigned to every active packet. If a receiver detects the loss of active packet checking the sequence number, the receiver requests the retransmission of the lost packet to the previous active node. kiter receiving an active packet and adapting security and reliability schemes, intermediate active nodes not only copy and send the Packet Instantly but also apply some suity mechanisms to it. And the active packet transmission engine is proposed to provide these transmission schemes The simulation of the adapted active node discovery scheme and the proposed active packet transmission engine is performed. The simulation results show that the adapted active node discovery scheme is efficient and the proposed active engine has the low latency and the high performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.271-276
• /
• 2009

An local area weather condition monitoring system to minimize many disasters from the sudden change of weather condition in local and mountain area is proposed. Firstly, the comparison of present state of the related monitoring systems and the possibility of realization with some merits are investigated. Moreover, this paper present direction of local area weather condition monitoring system based on integration of wireless sensor network and CDMA network following some case study. Through the efficient integration of both networks, the measured weather condition data from sensors can be transmitted to the server or mobile to monitor with high reliability. The proposed monitoring system will guide new type of project in wireless sensor network and support alarm service of the sudden change of weather condition to mobile user from central official regulations.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.673-686
• /
• 2018

The physical properties of rocks constituting the rock mass were analyzed by using various methods such as 7 kinds of physical properties of about 2,400 data. The correlation equation was derived from the correlation equation with the dependent variables by screening independent variables through the significance level using multiple regression analysis. In order to verify the reliability of this equation, verification was performed through comparison with actual data using artificial neural network learning. The analysis results by petrogenesis and strength confirmed that the elastic wave velocity (compressional wave) and elastic modulus as the main influence factors for the independent variables affecting the dependent variables. This proves that most of the correlation equations using the above items are found in existing studies. And through this study, it is confirmed whether the rock classification is based on the above items in various standards. In addition, the analysis results of representative rocks showed a high correlation as the equation for estimating unconfined compressive strength and elastic modulus exceeds the coefficient of determination 0.8.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Convergence Security Journal
• /
• v.15 no.3_2
• /
• pp.59-70
• /
• 2015

This study aims at exploring relation of social security network building, civil culture and community unity. To achieve the purpose, this study selected the general citizens in Seoul Region (Gangdong, Gangseo, Gangnam and Gangbuk) from Jul. 15 to Sept. 15, 2014 as population and sampled 400 people using cluster random sampling. Excluding unhonest data, the number of cases used for the final analysis is 337 people. The collected data were analyzed for the study purpose using SPSSWIN 18.0, as statistical techniques, factor analysis, reliability analysis, correlation analysis, t-test, one-way ANOVA, multiple regression analysis, path analysis etc. were used. First, social security network building has an effect on civil culture. That is, the more activated voluntary crime prevention activity, the higher order law-abiding spirit. The more activated local government security education, police public order service, the higher awareness of participation becomes. First, social security network building has an effect on civil culture. That is, the more activated voluntary crime prevention activity, the higher order law-abiding spirit. The more activated local government security education, police public order service, the higher awareness of participation becomes. The more activated voluntary crime prevention activity, street CCTV facilities, police public order service, the higher tolerance spirit becomes. On the contrary, street CCTV facilities reduce citizens' autonomy. Second, social security network building has an effect on community unity. The more activated street CCTV facilities, police public order service, crime prevention design, the higher a sense of stability becomes. The more activated local government security education, police public order service, crime prevention design, the higher awareness of community becomes. The more activated voluntary crime prevention activity, government security education, police public order service, crime prevention design, the higher community institution becomes. Third, civil culture has an effect on community unity. That is, the more activated awareness of community, tolerance spirit, the higher a sense of stability, awareness of community and community system become. Fourth, social security network building has an effect on civil culture and community unity. That is, social security network building has a low effect community institution directly, but if civil culture is enhanced through social security network building, then it has a high effect on community unity.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.77-88
• /
• 2003

Objectives: The purpose of this study was to compare reliability and validity of three Korean versions of the 20-item Toronto Alexithymia scale and to confirm the most reliable and validated Korean translation of the 20-item Toronto Alexithymia Scale for both clinical and research purpose in Korea. The first one was a Korean version of the 20-Item Toronto Alexithymia Scale developed by Lee YH et al in 1996 which was designated as TAS-20K(1996) in this study. This scale had a problem with one item due to the cultural difference regarding the word 'analyzing' between western culture and Korean culture. The second one was the revised version of TAS-20K(1996) on that point by Lee YH et al in 1996 without validation which was designated as TAS-20K(2003) in this study. The third one was a 23-item Korean version developed by Sin HG and Won HT in 1997, which was somewhat different from the 20-item Toronto Alexithymia Scale(TAS-20) in the number of total item, the content of some items and the scoring method. This scale was designated as S-TAS here. Methods: 408 medical students were tested with one scale composed of all the different items randomly arranged from the three versions. We evaluated goodness-of-fit and Cronbach $\alpha$ coefficients of three scales for reliability. We used confirmatory factor analysis to compare validity. Results: TAS-20K(2003) showed that it had better internal consistency than TAS-20K(1996), which implied that the cultural difference should be considered in the Korean translation. Both TAS-20K(2003) and S-TAS replicated three-factor structures and had adequacy of fit, good internal consistency and acceptable validity. However, S-TAS had one item with poor item-factor correlation and didn't show high correlation between item 2 and factor 1 as before in 1997. Conclusion: Although S-TAS had added 3 items and changed the content of two items, it didn't show better reliability and validity than TAS-20K(2003). Therefore it is proposed to use TAS-20K (2003) as the Korean version of the 20-item Toronto Alexithymia Scale(TAS-20K) for international communication of results of Alexithymia research. It has good internal consistency and validity and maintains original items, the same construct and scoring method as the 20-item Toronto Alexithymia Scale.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.15-24
• /
• 2007

The recognition of postal address images is indispensable for the automatic sorting of postal envelopes. The process of the address image recognition is composed of three steps-address image preprocessing, character recognition, address interpretation. The extracted character images from the preprocessing step are forwarded to the character recognition step, in which multiple candidate characters with reliability scores are obtained for each character image extracted. aracters with reliability scores are obtained for each character image extracted. Utilizing those character candidates with scores, we obtain the final valid address for the input envelope image through the address interpretation step. The envelope sorting rate depends on the performance of all three steps, among which character recognition step could be said to be very important. The good character recognizer would be the one which could produce valid candidates with very reliable scores to help the address interpretation step go easy. In this paper, we propose the method of generating character candidates with reliable recognition scores. We utilize the existing MLP(multilayered perceptrons) neural network of the address recognition system in the current automatic postal envelope sorters, as the classifier for the each image from the preprocessing step. The MLP is well known to be one of the best classifiers in terms of processing speed and recognition rate. The false alarm problem, however, might be occurred in recognition results, which made the address interpretation hard. To make address interpretation easy and improve the envelope sorting rate, we propose promising methods to reestimate the recognition score (confidence) of the existing MLP classifier: the generation method of the statistical recognition properties of the classifier and the method of the combination of the MLP and the subspace classifier which roles as a reestimator of the confidence. To confirm the superiority of the proposed method, we have used the character images of the real postal envelopes from the sorters in the post office. The experimental results show that the proposed method produces high reliability in terms of error and rejection for individual characters and non-characters.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.153-160
• /
• 2019

In this study, The purpose of this study is to analyze how the rating scale and review contents attributes of social network-based services and products affect consumer purchasing patterns. information provided by screening the main factors. These analyzes are closely and quickly integrated between individuals and businesses, and enable to analyze the transaction that the impact of changing consumers on consumption and purchasing through the usefulness and a priori estimates of reviews and ratings at this time when networks and smart technologies are involved in a wide range of consumer activities. For this study, hierarchical analysis (AHP) and delphi (Delphi) methods applied to classify the high end variables into usefulness, technicality and value, Each subvariable was grouped into three factors and analyzed for importance through evaluation weights. As a result, we could analyze the importance of durability, usefulness, technological innovation, and cost and quality of value. Therefore, this study is expected to provide supplementary and additional useful information to consumers and companies participating in economic activities in various ways by simultaneously analyzing the review score and the reliability of posting information provided by verifying the main factors.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.219-228
• /
• 2009

The growing application and the numerous qualities of induction motors (1M) in industrial processes that require high security and reliability levels has led to the development of multiple methods for early fault detection. However, various faults can occur, such as stator short-circuits and rotor failures. Traditionally the diagnosis machine is done through a sinusoidal power supply, in the present paper we study experimentally the effects of the rotor failures, such as broken rotor bars in function of the ac supplying, the load and show the impact of the converter from diagnosis of the machine. The technique diagnosis used is based on the spectral analysis of stator currents or stator voltages respectively according to the types of induction motor ac supplying. So, four different ac supplying are considered: ${\odot}$ the IM is directly by the balanced three-phase network voltage source, ${\odot}$ the IM is fed by a sinusoidal current source given the controlled by hysteresis, ${\odot}$ the IM is fed (in open loop) by a scalar control imposing through ratio V/f=constant, ${\odot}$ the IM is controlled through a vector control using space vector pulse width modulation (SVPWM) technique inverter with an outer speed loop.