• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.60-68
• /
• 2003

Objectives: The purpose of this study was to develop a Korean version of the Levels of Emotional Awareness Scale(LEAS-K) and to examine its validity and reliability. Methods: LEAS-K was developed from translating original LEAS into Korean. The subjects were 476 Korean medical students(322 males and 154 females). The internal consistency was evaluated with the Cronbach's alpha coefficients and 40 protocols were independently scored by two raters to confirm interrater reliability. Additionally, a Korean version of 20-item Toronto Alexithymia Scale(TAS-20K), Korean versions of the Openness to Experience Inventory(OE), the Marlowe-Crowne Scale (MCS), the Bendig short form of the Taylor Manifest Anxiety Scale(TMAS) and the Emotional Expressivity Scale(EES) were rated to evaluate concurrent validity. Results: The internal consistency measured by Cronbach's alpha was 0.81 and interrater reliability was high{r(40)=0.99}. Correlation coefficients for concurrent validity were nonsignificant with TMAS and EES. LEAS-K correlated significantly with TAS-20K{r(476)=-0.10, p<0.05}, OE {r(476)=0.10, p<0.05} and MCS {r(476)=0.10, p<0.05}. Conclusion: LEAS-K was demonstrated to have high reliability and validity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.965-975
• /
• 2005

In the case of the fault in stator windings of a high voltage motor. it facilitates certain destructive characteristics in insulations. This will result in a decreased reliability in power supplies and will prevent the generation of electricity, which will result in huge economic losses. This study simulates motor windings using normal windings and four faulty windings for an actual fault in stator winding of a high voltage motor. The partial discharge signals produced in each faulty winding were measured using an 80 PF epoxy/mica coupler sensor. In order to quantified signal waves its a way of feature extraction for each faulty signal, the signal wave of winding was quantified to measure the degree of skewness shape and kurtosis, which are both types of statistical parameters, using a discrete wavelet transformation method for each faulty type. Wave types present different types lot each faulty type, and the skewness and kurtosis also present different quantified values. The result of feature extraction was used as a preprocessing stage to identify a certain fault in stater windings. It is evident that the type of faulty signals can be classified from the test results using faulty signals that were randomly selected from the signal, which was not applied in the training after the training and learning period, by applying it to a back-propagation algorithm due to the supervising and learning method in a neural network in order to classify the faulty type. This becomes an important basis for studying diagnosis methods using the classification of faulty signals with a feature extraction algorithm, which can diagnose the fault of stator windings in the future.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2010

Recently, various industrial embedded systems including vehicles controlled electronically are evolving to distributed multi-micro controller system. Accordingly, there is a need for standard CAN(Controller Area Network) protocol that ensures high stability and reliability of communication and is simple to construct object-oriented system with high control efficiency. CAN communication interface used general-purpose processor doesn't have many limitations in various application development because of fixed hardware architecture. This paper design and implement a CAN communication interface system based on FPGA. It is verified function and performance of system through monitoring communication with existing AT90CAN128 controller. Implemented CAN communication interface can be reused in development of application systems based on FPGA. And it provides low-cost, small-size and low-power design advantages.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.282-288
• /
• 2014

Stoping method has been acknowledged as one of the typical metalliferous underground mining methods. Notwithstanding with the popularity of the method, the majority of stoping mines are suffering from excessive unplanned dilution which often becomes as the main cause of mine closure. Thus a reliable unplanned dilution management system is imperatively needed. In this study, reliable unplanned dilution prediction system is introduced by adopting artificial neural network (ANN) based on data investigated from one underground stoping mine in Western Australia. In addition, contributions of input parameters were analysed by connection weight algorithm (CWA). To validate the reliability of the proposed ANN, correlation coefficient (R) was calculated in the training and test stage which shown relatively high correlation of 0.9641 in training and 0.7933 in test stage. As results of CWA application, BHL (Length of blast hole) and SFJ (Safety factor of Joint orientation) show comparatively high contribution of 18.78% and 19.77% which imply that these are somewhat critical influential parameter of unplanned dilution.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• Journal of Information Processing Systems
• /
• v.19 no.2
• /
• pp.240-257
• /
• 2023

The industrial Internet of Things (IIoT) is characterized by intelligent connection, real-time data processing, collaborative monitoring, and automatic information processing. The heterogeneous IIoT devices require a high data rate, high reliability, high coverage, and low delay, thus posing a significant challenge to information security. High-performance edge and cloud servers are a good backup solution for IIoT devices with limited capabilities. However, privacy leakage and network attack cases may occur in heterogeneous IIoT environments. Cloud-based multi-party computing is a reliable privacy-protecting technology that encourages multiparty participation in joint computing without privacy disclosure. However, the default cloud selection method does not meet the heterogeneous IIoT requirements. The server can be dishonest, significantly increasing the probability of multi-party computation failure or inefficiency. This paper proposes a blockchain and smart contract-based optimized cloud node selection framework. Different participants choose the best server that meets their performance demands, considering the communication delay. Smart contracts provide a progressive request mechanism to increase participation. The simulation results show that our framework improves overall multi-party computing efficiency by up to 44.73%.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.115-124
• /
• 2015

In this paper we analyse the previous (Quality of Services) and QoE(Quality of Experience) methods, and propose a high reliable network system framework and its service forwarding method that is able to provide seamless N-Screen services for proliferating disaster informations. The service satisfaction measurement, i.e., QoE, of contents consumers in N-screens services is going to be important the factor in disaster information proliferation because N-Screen services in the previous methods based on multi devices only focused on information transmission. The proposed system around these services is composed of a disaster information process framework for accepting user's service requirement, push service modules for minimizing the number of packets to be caused when carrying out the push service, and a push service controller for maximizing QoE measures. In order to provide a seamless N-Screen service on diverse screens, such as smartphone, PC, and big screen, we also have Open API(Application Programming Interface) functions. Through these results, we expect to evaluate QoS and QoE quality in the seamless N-Screen service.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.69-76
• /
• 2010

We describe an all-optical circuit which recognizes the header information of packet-by-packet in the access networks based on FTTH. The circuit's operation is confirmed by an experiment in the recognition of 3 and 4 header bits. The output from the header recognition circuit appears in a signal assigned in the time axis according to the header information. The recognition circuit of header for self-routing has a very simple structure using only delay lines and switches. The circuit is expected that it can be constructed of the high reliability and the low cost. Also, the circuit can solve the problems of the power loss and private security which is the weak point of the TDM-PON method by being established a unique transmission line to each subscriber.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.107-109
• /
• 2004

In this paper, authors propose the sensor fusion system that can recognize multiple 3D objects from 2D projection images and tactile information. The proposed system focuses on improving recognition performance of 3D object. Unlike the conventional object recognition system that uses image sensor alone, the proposed method uses tactual sensors in addition to visual sensor. Neural network is used to fuse these informations. Tactual signals are obtained from the reaction force by the pressure sensors at the fingertips when unknown objects are grasped by four-fingered robot hand. The experiment evaluates the recognition rate and the number of teaming iterations of various objects. The merits of the proposed systems are not only the high performance of the learning ability but also the reliability of the system with tactual information for recognizing various objects even though visual information has a defect. The experimental results show that the proposed system can improve recognition rate and reduce learning time. These results verify the effectiveness of the proposed sensor fusion system as recognition scheme of 3D object.