• 제목/요약/키워드: High performance steel

검색결과 1,522건 처리시간 0.024초

D-tryptophan과 N-CBZ-D-phenylalanine의 분리에서 이온성 액체의 영향 (Influence of Ionic Liquid for Separation of D-tryptophan and N-CBZ-D-phenylalanine)

  • 김은철;정금주;;구윤모;노경호
    • Korean Chemical Engineering Research
    • /
    • 제44권5호
    • /
    • pp.453-459
    • /
    • 2006
  • 두 개의 D-아미노산 물질을 분리함에 있어서 이온성 액체의 영향을 고찰하였다. 아미노산 물질로서 D-tryptophan과 N-CBZ-D-phenylalanine을 사용하였으며, 이온성 액체로서 1-butyl-3-methylimidazolium tetrafluoroborate(${[BMIm]}^+{[BF_4]}^-$)을 사용하였고, 역상 액체 크로마토그래피로 분석하였다. 이동상은 각각 65%, 70%, 80% 메탄올을 주성분으로 0.5, 1.0, 1.5, 2.0, 4.0, 6.0, 8.0, 10.0, 12.0과 15.0 mmol/L의 농도의 이온성 액체를 첨가하였고, 칼럼($3.9{\times}300mm$)에 $15{\mu}m$의 입자 크기를 가진 $C_{18}$ 실리카 겔을 충진하여 사용하였다. 이온성 액체를 첨가함으로써 D-tryptophan의 체류인자는 거의 변화가 없었지만, N-CBZ- D-phenylalanine의 체류인자는 감소하였다. 두 물질의 분리도는 메탄올의 함량과 이온성 액체의 농도에 따라 변화하였다. 메탄올의 함량이 낮을수록, 이온성 액체의 농도의 증가에 따라서 분리도는 증가하는 경향을 나타내었다

알칼리 활성 슬래그 결합재를 이용한 자기충전 콘크리트의 기초 연구 (Basic Research of Self Compacting Concrete Using Alkali-Activated Slag Binder)

  • 송금일;신경식;공민호;송진규
    • 콘크리트학회논문집
    • /
    • 제25권6호
    • /
    • pp.657-665
    • /
    • 2013
  • 이 연구는 알칼리 활성 슬래그(alkali-activated slag, AAS) 결합재를 이용하여 자기충전성을 갖는 콘크리트 개발을 위한 기초 연구로서 자기충전 콘크리트에 사용될 AAS 결합재 및 고성능 감수제의 유동성능 평가를 통해 선정하고, 선정된 결합재 및 고성능 감수제를 사용하여 자기충전 콘크리트를 배합한 후 굳기 전 콘크리트의 유동특성을 평가하였다. 높은 pH에서 폴리카르본산계 고성능 감수제의 성능이 저하됨에 따라 비교적 강도가 낮은 약알칼리성 활성화제를 사용한 AAS 결합재를 선정하였다. 시험 결과 일본토목학회(JSCE) 기준인 고유동성, 재료분리 저항성, 간극 충전성은 대부분 만족시켰으나, AAS 페이스트의 기본점성이 OPC에 비해 높은 이유로 유럽통합기준의 간극 통과성은 만족시키지 못했다. 하지만, AAS 결합재를 이용하면 증점제의 사용 없이 재료분리가 발생되지 않는 자기충전 콘크리트 제조가 가능함을 확인하였다. 이 연구는 AAS 결합재를 이용한 자기충전 콘크리트 개발의 기초연구로서 앞으로 현장적용이 가능한 AAS 자기충전 콘크리트 개발을 위해 더 높은 강도의 고유동 결합재와 간극 통과성을 높이기 위한 콘크리트 배합비의 연구가 필요하다.

극저온액체 저장용기에서 열전도 차폐단의 영향 (Effect of Vapor-Cooled Heat Stations in a Cryogenic Vessel)

  • 김서영;강병하;최항집
    • 한국수소및신에너지학회논문집
    • /
    • 제9권4호
    • /
    • pp.169-176
    • /
    • 1998
  • Ni/MH 2차전지의 음극용 금속간화합물전극의 부식특성에 미치는 합금원소와 결합제의 영향을 조사하였다. 전극의 재료는 $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$$(LM)Ni_{3.6}Co_{0.7}Mn_{0.3}Al_{0.4}$$AB_5$ type합금을 모재로 하였다. 여기에 Si sealant 또는 PTFE를 결합제로 첨가한 것과 원재료 분말에 구리를 20% 무전해도금한 것을 냉간 압착하여 전극을 제조하였다. 부식특성을 조사하기위해 탈공기된 6M의 KOH 용액에서 동전위법과 순환전위법을 이용하여 부식전류와 전류밀도를 측정하였다. 모재에 Co가 많이 함유되면 전극의 내식성을 향상시키고 Ni이 많이 함유되면 충전과 방전을 반복하는 동안에 전극의 안정성을 저하시켰다. 부식전류밀도는 Si sealant를 결합제로 사용한 전극의 경우가 PTFE를 사용한 전극의 경우보다 낮았고 Cu가 도금된 전극은 내식성에서 가장 우수하게 나타났다.

  • PDF

The Effect of Grid Ratio and Material of Anti-scatter Grid on the Scatter-to-primary Ratio and the Signal-to-noise Ratio Improvement Factor in Container Scanner X-ray Imaging

  • Lee, Jeonghee;Lim, Chang Hwy;Park, Jong-Won;Kim, Ik-Hyun;Moon, Myung Kook;Lim, Yong-Kon
    • Journal of Radiation Protection and Research
    • /
    • 제42권4호
    • /
    • pp.197-204
    • /
    • 2017
  • Background: X-ray imaging detectors for the nondestructive cargo container inspection using MeV-energy X-rays should accurately portray the internal structure of the irradiated container. Internal and external factors can cause noise, affecting image quality, and scattered radiation is the greatest source of noise. To obtain a high-performance transmission image, the influence of scattered radiation must be minimized, and this can be accomplished through several methods. The scatter rejection method using an anti-scatter grid is the preferred method to reduce the impact of scattered radiation. In this paper, we present an evaluation the characteristics of the signal and noise according to physical and material changes in the anti-scatter grid of the imaging detector used in cargo container scanners. Materials and Methods: We evaluated the characteristics of the signal and noise according to changes in the grid ratio and the material of the anti-scatter grid in an X-ray image detector using MCNP6. The grid was composed of iron, lead, or tungsten, and the grid ratio was set to 2.5, 12.5, 25, or 37.5. X-ray spectrum sources for simulation were generated by 6- and 9-MeV electron impacts on the tungsten target using MCNP6. The object in the simulation was designed using metallic material of various thicknesses inside the steel container. Using the results of the computational simulation, we calculated the change in the scatter-to-primary ratio and the signal-to-noise ratio improvement factor according to the grid ratio and the grid material, respectively. Results and Discussion: Changing the grid ratios of the anti-scatter grid and the grid material decreased the scatter linearly, affecting the signal-to-noise ratio. Conclusion: The grid ratio and material of the anti-scatter grid affected the response characteristics of a container scanner using high-energy X-rays, but to a minimal extent; thus, it may not be practically effective to incorporate anti-scatter grids into container scanners.

세라믹 ${ZrO}_{2}, {Si}_{3}{N}_{4}$ 및 SiC를 SiC, AISI 4340 및 청동으로 윤활 및 건조조건에서 미끄름시험하였을 때의 마찰 및 마멸 거동 (Friction and wear characteristics during sliding of ${ZrO}_{2}, {Si}_{3}{N}_{4}$ and SiC with SiC, AISI 4340 and bronze under dry and lubricated condition)

  • 강석춘
    • 대한기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.404-410
    • /
    • 1989
  • 본 연구에서는 공업용 세라믹(요업재료등)으로 개발된 것 중에서 가장 마찰특성이 우수할 것으로 간주되고 있는 SiC, Si$_{3}$N$_{4}$와 ZrO$_{2}$ 의 건조 및 윤활마찰특성과 금속과의 마찰특성을 실험적으로 밝히려 한다.

이형 GFRP Rebar로 보강된 보의 유효단면이차모멘트 산정식 제안 (New Suggestion of Effective Moment of Inertia for Beams Reinforced with the Deformed GFRP Rebar)

  • 심종성;오홍섭;주민관;임준현
    • 콘크리트학회논문집
    • /
    • 제20권2호
    • /
    • pp.185-191
    • /
    • 2008
  • 최근 콘크리트 열화와 같은 문제를 근본적으로 해결하기 위해 고내구성을 보유한 콘크리트구조물의 장수명화에 대한 연구가 활발히 진행되고 있는 가운데, 신설 구조물로의 철근대체 FRP rebar를 적용한 고내구성 콘크리트구조물에 대한 연구 개발 및 활용이 점차 증가되는 추세이다. 이에 대해 콘크리트구조물의 경제적인 측면에서 적용 가능한 FRP rebar로서는 GFRP rebar가 주목을 받고 있으며 그 사용성 또한 증대되고 있다. 하지만 GFRP rebar로 보강된 콘크리트구조물에 대한 휨모멘트 성능은 이미 그 우수성이 구명되어 있으나 GFRP의 단점 중 하나인 처짐에 대한 사용성 측면은 개선되어야 할 점으로 지적되고 있다. 본 연구에서는 개발된 이형 GFRP rebar로 보강 콘크리트 보 구조물의 처짐 거동 예측을 위해 기존의 유효단면이차모멘트 제안식들과 비교 분석을 실시하였으며, 그 결과 기존의 유효단면이차모멘트 산정식은 균열모멘트 이후 극한모멘트의 50% 수준까지의 유효단면이차모멘트는 비교적 정확히 예상할 수 있었으나 이후에는 실제 유효단면이차모멘트보다 다소 높은 값을 나타냄으로써 최종 파괴시까지의 처짐량을 과소평가하는 것으로 분석되었다. 따라서 본 연구에서는 탄성계수 환산비를 적용한 보강비를 사용한 Toutanji et al. (2000)의 유효단면이차모멘트 제안식을 바탕으로 이형 GFRP rebar로 보강된 콘크리트보에 대한 유효단면이차모멘트 제안식을 도출하였으며, 그 결과 제안된 식을 적용하여 각 시험체의 시험데이터와 비교 분석을 통하여 최종 파괴시까지의 하중-처짐 관계를 비교적 정확히 예측할 수 있는 것으로 분석되었다.

IsoTruss® 그리드를 적용한 건물구조시스템의 특성 (Characteristics of Building Structural System with IsoTruss® Grid)

  • 김태헌;김영찬
    • 한국산학기술학회논문지
    • /
    • 제18권2호
    • /
    • pp.737-742
    • /
    • 2017
  • 본 최근 기존의 모습과는 다른 고층건물의 형태가 대도시에서 랜드마크로서 주목을 끌고 있으며 혁신적인 건물형태에 대한 탐색은 건축분야에서 지속적으로 이루어질 것이다. 본 연구에서는 소규모의 구조체에 활용되고 있는 $Isotruss^{(R)}$ 그리드를 건물의 외주골조에 적용하여 구조적 성능을 검토하였다. 구조적 거동을 비교하기 위해 다이아그리드 구조시스템을 준거로 하였다. 동일한 규모의 16층, 32층, 48층 건물을 두가지의 구조시스템으로 설계하였다. 아이소트러스 그리드 구조 부재의 선정은 예비적 설계단계로 생각하여 다이아그리드의 강성에 기준한 설계방법을 이용하였다. 경사기둥의 각도로 아이소트러스 구조는 $59^{\circ}$, 다이아그리드 구조는 $68.2^{\circ}$로 하였다. 횡강성, 철골량, 외부골조의 횡력 부담비율, 기둥의 축력 강도비, 고유 진동수를 비교하였다. 6개의 건물 모델을 해석한 결과 두 구조시스템의 구조적 성능은 유사하나 외주골조의 횡하중 분담율이 아이소트러스 그리드 구조가 93.3%로 다이아그리드 구조의 88.7% 보다 약간 커서 코어 기둥의 배치에 있어 유리하다고 볼 수 있다. 따라서 본 연구에서 제안하는 아이소트러스 그리드 시스템은 입면형태가 독특할 뿐만 아니라 기존의 구조시스템과 동등한 구조적 성능을 보유한 것으로 보인다.

고강도 확대머리 인장철근을 가지는 SFRC 깊은 보의 전단강도 (Shear Strength of SFRC Deep Beam with High Strength Headed Reinforcing Tensile Bars)

  • 김영록;이창용;김승훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권5호
    • /
    • pp.111-117
    • /
    • 2019
  • 확대머리 SD600 고강도 인장철근으로 단부 정착된 SFRC 깊은보의 전단성능을 평가하기 위해 전단 실험을 수행하였다. 실험 변수는 주인장 철근의 단부 정착방법(확대머리 철근, 일자형 철근), 단부 정착길이, 전단보강근 유무 등이다. 전단경간비는 1을 가지는 실험체에 대한 전단실험결과, 모든 실험체는 초기 휨 균열이 발생한 후 경사균열이 진행되면서 최종적으로 압축전단파괴되었다. 확대머리 철근으로 기계적 정착된 실험체들이 일자형 철근 정착에 비하여 5.6~22.4% 더 큰 전단강도를 나타내었다. 확대머리 철근으로 기계적 정착된 실험체들에 대하여 최대하중의 75%까지는 지압응력이 전체 정착응력의 0.9~17.2%에 도달하였으나, 최대하중 시점에서 지압응력이 전체 정착응력의 22.4%~46%에 도달하여 큰 응력 부담률을 나타내었다. 이를 통하여 확대머리 지압응력에 의한 정착응력 증가가 전단강도에 큰 영향을 미침을 알 수 있다. 실험 전단강도가 실용식에 의한 전단강도의 2.68~4.65 배로 평가되어, 실용식이 전단내력을 안전측으로 평가하였다.

한국의 그린 비즈니스/IT 실태분석을 통한 추진전략 우선순위 도출에 관한 연구 (Development of Korean Green Business/IT Strategies Based on Priority Analysis)

  • 김재경;최주철;최일영
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.191-204
    • /
    • 2010
  • Recently, the CO2 emission and energy consumption have become critical global issues to decide the future of nations. Especially, the spread of IT products and the increased use of internet and web applications result in the energy consumption and CO2 emission of IT industry though information technologies drive global economic growth. EU, the United States, Japan and other developed countries are using IT related environmental regulations such as WEEE(Waste Electrical and Electronic Equipment), RoHS(Restriction of the use of Certain Hazardous Substance), REACH(Registration, Evaluation, Authorization and Restriction of CHemicals) and EuP(Energy using Product), and have established systematic green business/IT strategies to enhance the competitiveness of IT industry. For example, the Japan government proposed the "Green IT initiative" for being compatible with economic growth and environmental protection. Not only energy saving technologies but energy saving systems have been developed for accomplishing sustainable development. Korea's CO2 emission and energy consumption continuously have grown at comparatively high rates. They are related to its industrial structure depending on high energy-consuming industries such as iron and steel Industry, automotive industry, shipbuilding industry, semiconductor industry, and so on. In particular, export proportion of IT manufacturing is quite high in Korea. For example, the global market share of the semiconductor such as DRAM was about 80% in 2008. Accordingly, Korea needs to establish a systematic strategy to respond to the global environmental regulations and to maintain competitiveness in the IT industry. However, green competitiveness of Korea ranked 11th among 15 major countries and R&D budget for green technology is not large enough to develop energy-saving technologies for infrastructure and value chain of low-carbon society though that grows at high rates. Moreover, there are no concrete action plans in Korea. This research aims to deduce the priorities of the Korean green business/IT strategies to use multi attribute weighted average method. We selected a panel of 19 experts who work at the green business related firms such as HP, IBM, Fujitsu and so on, and selected six assessment indices such as the urgency of the technology development, the technology gap between Korea and the developed countries, the effect of import substitution, the spillover effect of technology, the market growth, and the export potential of the package or stand-alone products by existing literature review. We submitted questionnaires at approximately weekly intervals to them for priorities of the green business/IT strategies. The strategies broadly classify as follows. The first strategy which consists of the green business/IT policy and standardization, process and performance management and IT industry and legislative alignment relates to government's role in the green economy. The second strategy relates to IT to support environment sustainability such as the travel and ways of working management, printer output and recycling, intelligent building, printer rationalization and collaboration and connectivity. The last strategy relates to green IT systems, services and usage such as the data center consolidation and energy management, hardware recycle decommission, server and storage virtualization, device power management, and service supplier management. All the questionnaires were assessed via a five-point Likert scale ranging from "very little" to "very large." Our findings show that the IT to support environment sustainability is prior to the other strategies. In detail, the green business /IT policy and standardization is the most important in the government's role. The strategies of intelligent building and the travel and ways of working management are prior to the others for supporting environment sustainability. Finally, the strategies for the data center consolidation and energy management and server and storage virtualization have the huge influence for green IT systems, services and usage This research results the following implications. The amount of energy consumption and CO2 emissions of IT equipment including electrical business equipment will need to be clearly indicated in order to manage the effect of green business/IT strategy. And it is necessary to develop tools that measure the performance of green business/IT by each step. Additionally, intelligent building could grow up in energy-saving, growth of low carbon and related industries together. It is necessary to expand the affect of virtualization though adjusting and controlling the relationship between the management teams.

Growth, Bone Mineralization and Mineral Excretion in Broiler Starter Chicks Fed Varied Concentrations of Cholecalciferol

  • Rama Rao, S.V.;Raju, M.V.L.N.;Shyam Sunder, G.;Panda, A.K.;Pavani, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권2호
    • /
    • pp.237-244
    • /
    • 2007
  • An experiment was conducted to study the growth performance, bone mineralization and mineral excretion in broiler starter chicks fed high levels of cholecalciferol (CC) at sub-optimal levels of calcium (Ca) and non-phytate phosphorus (NPP). Five hundred and sixty day-old Vencobb female broiler chicks were housed in raised wire floor stainless steel battery brooder pens ($24"{\times}30"{\times}18"$) at the rate of five chicks per pen. A maize-soyabean meal basal diet was supplemented with dicalcium phosphate, oyster shell powder and synthetic CC to arrive at two levels each of Ca (0.50 and 0.60%), and NPP (0.25 and 0.30%) and four levels of CC (200, 1,200, 2,400 and 3,600 ICU/kg) in a $2{\times}3{\times}4$ factorial design. Each diet was fed ad libitum to chicks in 7 pens from 2 to 21days of age. Body weight gain, feed intake and bone weight increased (p<0.05) with increase in level of CC at both the Ca and NPP levels tested. The CC levels required to obtain significant improvement in body weight gain and feed intake reduced (2,400 ICU/kg vs. 1,200 ICU/kg) with increase in levels of P in diet (0.25% vs. 0.3%, respectively). The feed conversion ratio was significantly improved (p<0.05) with increase in level of CC from 200 to 1,200 ICU/kg diet at 0.5% Ca, while at 0.6% Ca, the level of CC in diet did not influence the feed efficiency. Tibia mineralization (density, breaking strength and ash content) and Ca and P contents in serum increased significantly (p<0.05) with increase in levels of CC in diet. The CC effect on these parameters was more pronounced at lower levels of Ca and NPP (0.5 and 0.25%, respectively). The data on body weight gain and feed intake indicated that NPP level in diet can be reduced from 0.30 to 0.25% by increasing CC from 200 to 2,400 ICU/kg. Similarly, the bone mineralization (tibia weight, density and ash content) increased non-linearly (p<0.01) with increase in CC levels in diet. Concentrations of P and Mn in excreta decreased (p<0.01), by increasing CC level from 200 to 2,400 ICU/kg diet. It can be concluded that dietary levels of Ca and NPP could be reduced to 0.50 and 0.25%, respectively by enhancing the levels of cholecalciferol from 200 to 2,400 ICU/kg with out affecting body weight gain, feed efficiency and bone mineralization. Additionally, phosphorus and manganese excretion decreased with increase in levels of CC in broiler diet.