• Journal of the Korean earth science society
• /
• v.22 no.6
• /
• pp.480-490
• /
• 2001

The soil-air exchange processes of Hg were investigated from the Hari area of Kang Hwa Island during the late March 2001. In the course of our study, we determined the concentration gradients of Hg and combined these gradient data with micrometeorological components to derive its fluxes. Results of our study indicate that the concentration levels of Hg in the study area are notably lower than those typically found in urbanized areas of Korea. However, the computed fluxes were seen to be significantly larger for relatively remote areas, reaching over 200 ng/m$^2$/hr. Comparison of environmental conditions shows that the concentrations of most pollutant species including NO$_X$ and PM were significantly higher during emission, while meteorological conditions were characterized by high temperature and low humidity. Results of correlation analysis also indicate that such pollutants as hydrocarbons, nitrogen oxides, and PM generally exhibit strong positive correlations with Hg-related parameters during emission events, while such relationships were reversed during dry deposition events. The results of our present study suggest the possibility that the concentrations and fluxes of total gaseous Hg observed during deposition events can be influenced by the processes that are also important for the fine, rather than coarse, size fraction of particles.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.3
• /
• pp.69-76
• /
• 2017

Indoor Air Quality(IAQ) affects physical and mental state of person who is residing indoor. Also, it manages daily life condition of Indoor Air in the building. According to the study, office workers spend 23 hours and 12 minutes, about 97% of his/her day indoor. Therefore, Indoor air quality affects not only the health of the person whose staying inside for a long hours but also the productivity and efficiency of work. This study conduct investigations on employees' awareness of indoor air quality of office in university. By doing so, we are able to determine current situation and provide basic data of improvement for derived problems. As a result, most of the respondents were not satisfied with ventilation and moisture which are elements of Indoor Air Quality. These led people to struggle with symptoms of health. Therefore, to improve the indoor air quality of a university office, it is necessary to exchange the air six times an hour according to recommendation of Refrigeration and Air Conditioning Engineers (ASHRAE)in the United States. Also, plan for Ventilation system that consider temperature, humidity and air flow indoor shall be provided for high quality conformability. furthermore, It is necessary to consider the multilateral in factors of generation of revenue through health care savings of workers and improvement of productivity.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.552-563
• /
• 2000

The aim of this study was to characterize the forest vegetation and site of Odaesan National Park for ecological forest management. The vegetation could be divided into two forest community groups, seven forest communities, and several subcommunities. South exposed, dry slopes were covered with forests of the Quercus mongolica-Acer pseudosieboldianum community group. Quercus mongolica-Acer pseudosieboldianum community group could be subdivided into ${\bullet}$ Rhododendron mucronulatum var. ciliatum community on dry sites, especially on south or south-westly exposed ridges or convex slopes; ${\bullet}$ Lespedeza${\times}$tomentella community on south exposed slopes, at low altitudes in the eastern part of the study area; ${\bullet}$ Carex humilis-Maackia amurensis community on south exposed slopes up to the montane region; ${\bullet}$ Quercus mongolica-Acer pseudo-sieboldianum typical community on south exposed middle and low slopes, and on upper and middle north exposed slopes; ${\bullet}$ Pimpinella brachycarpa community, preferably on moderately moist and cool sites. On north exposed, more humid and moist sites, forests of the Dryopteris crassirhizoma-Cornus controversa community group were found. This group was subdivided into ${\bullet}$ Acer tschonoskii var. rubripes-Acer tegmentosum community on moderately moist to moist, loamy soils on shady slopes; ${\bullet}$ Deutzia glabrata-Ulmus laciniata community on north exposed slopes with rocky soil and boulders, having high humidity. There are several rare and endangered species in Rhododendron mucronulatum var. ciliatum community, Carex humilis-Maackia amurensis community, Vicia venosa var. cuspidata subcommunity and Saxifraga punctata subcommunity, and the communities were located in azonal areas in topography. To protect the species, the areas should be categorized as an absolute conservation area, and any forest working should be prohibited in this area.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.71-76
• /
• 2014

Master packaging system is a technology combining primary and secondary packaging to preserve the fresh produce in the supply chain. Master packaging system with tailor-designed gas transfer and $CO_2$ absorber of $Ca(OH)_2$ was applied to fresh shiitake mushroom in its supply from farm to retail store. The temperature, humidity and package atmosphere were monitored through the distribution and/or storage until the packages were opened to measure the mushroom quality. Conventional perforated individual packages without secondary master pack were prepared and travelled the same path for comparison purpose. While high temperature history was observed in some initial period of actual practice of the mushroom transportation and storage unexpectedly, the package atmosphere around the produce in the master packaging system was maintained at modified atmosphere consisting of $O_2$ concentration of 0.4 to 4.2% and $CO_2$ concentration of 0.7 to 1.7%, which is known to be beneficial for the mushroom preservation. While curing the mushrooms with precooled drying was effective for quality preservation, positive effect of master packaging system could be apparent for the uncured mushroom. Harmonized combination of curing treatment, master packaging system and temperature management was suggested for the best quality preservation of the fresh shiitake mushroom.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.761-769
• /
• 2004

This study was investigated the occurrence of sclerotinia rot caused by Sclerotinia sclerotiorum at the major perilla cultivating area, Gangdong-dong, Gangseo-gu, Busan in 1998. The incidence of this disease ranged from 8.1 to 28.3% at Gangdong-dong area during the growing seasons. Symptoms of the disease initially appeared damping-off of infected stems and soft-rot on the leaves of perilla. Under the relatively high humidity, abundant white mycelia of the pathogen formed on the lesion developed into black sclerotia later and the infected leaves were finally fell down. Sixteen isolates, Sl-S16, isolated from diseased lesions showing typical symptoms, and pathogenicity was tested using mycerlial disks. Among them, S2 isolate showing the most strong pathogenicity was selected and identified as Sclerotinia sclerotiorum on the basis of morphological and cultural characteristics. For biological control, an antagonistic bacteria, N4 isolate which effectively inhibited not only mycelial growth of S2 isolate but also suppress sclerotinia rot on the pot assay, was selected and identified as Bacillus megaterium according to Bergey's manual and API system., Wettable powder type, N4 formulation using B. megaterium N4 isolate was developed and estimated its control effect on perilla crops in a plastic house. As a results, N4 formulation which applied before 3 days inoculation of pathogen was effectually controlled Sclerotinia rot as the control value of 98.0%, was more effective than chemical fungicide, benomyl showing the control value of 78.0%. This is the first report of wettable powder formulation as a biocontrol agent using B. megaterium N4 against Sclerotinia rot caused by S. sclerotiorum on perilla.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2010

The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.1-6
• /
• 2010

A smoldering ground fire can be a probable cause of reignition of surface fire when transmitted from Fermentation layer to Humus layer with temperature higher than that of ignition. Purpose of this paper is to identify experimental methodology on the potential risk of a smoldering ground fire, which is similar to the real surface fuel bed, and its combustion characteristics. The fuel model designed in this study is composed of 3 layers such as Litter layer, Fermentation layer and Humus layer and 8 Thermocouples are set through 3 layer at each boundary and in between to detect the temperature change and duration of smoldering and propagation velocity. As a result, it was observed that ignition conditions in the boundary between L layer and F layer determined transmission and non-transmisstion to F-H layer. In addition, range of critical humidity at which a smoldering ground fire was transmitted in a material layer was 33~44% and when temperature exceeds $350^{\circ}C$, likelihood of transmission of a smoldering ground fire was high. In the research, the experimental model for multi-layer smoldering ground fire is suggested and information about propagation of smoldering fire, possibility of reignition according to moisture content, propagation velocity and temperature change are obtained, Also, the built-up methods were established to help analyze basic characteristics of smoldering ground fire.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.227-237
• /
• 2014

The purpose of this paper is to implement a multiple bio-signal central monitoring system based on textile fabrics flexible platform which can obtain and monitor bio signals(heart rate, body temperature, electrocardiography, electromyogram) of workers in special working environments and additional situational information (3-axis acceleration, temperature, humidity, illumination, surrounding image). This system can prevent various accidents that may occur in the remote work environment and provide fast and efficient response by detecting workers' situations in real-time. For it, the textile fabrics flexible platform was made as innerwear or outerwear so that it does not interfere with workers' performance while collecting bio-signal and situational information, and obtained information is sent to the central monitoring system through wireless communication. The central monitoring system is based on wireless medical telemetry service of WMTS (Wireless Medical Telemetry Service); can monitor from 2 to 32 people simultaneously; and was designed so that it can be expanded. Also, in this study, to verify performance of the WMTS communication model, packet transmission rates were compared according to the distance.

• Korean journal of applied entomology
• /
• v.52 no.1
• /
• pp.23-27
• /
• 2013

Investigations were conducted to prevent entrance of Bemisia tabaci (Gennadius) with very fine mesh nets. B. tabaci vectors tomato yellow leaf curl virus in tomatoes. B. tabaci could be completely prevented to penetrate into an 83 mesh net, though few of them passed the 60 mesh net. An independent 60 mesh net cage was built within one of the three interconnected common plastic greenhouse ($21.0{\times}18.3m$) in order to find its usefulness as a crop protection tool from insect pests. TYLCV infected tomato plants were not detected, though a few eggs of B. tabaci and mines of Liriomyza trifolii (Burgess) were detected locally at the entrance of the sliding door. There were practically no significant differences between treatments of nets and the conventional plant height, leaf length and width, number of floret clusters, sugar brix, and product yield. In viewpoints of commercialization, it could be considered highly prospectful to apply to the nets to glasshouses or other greenhouses in which the growing period of crops is long, if the nets were used in the openings of sides, ceilings, and entrances of the greenhouse. However, it might be necessary to take preventive measures for occurrences of insect pests living in soil, temporarily or permanently, as well as high humidity diseases.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.169-181
• /
• 2017

Objective: The aim of this study was to explore the influence of outdoor weather conditions on subjective responses during physical activity. Background: The largest difference between indoor and outdoor conditions is the existence of the sun. The heat load from the sun has an influence on the heat gain of the human body and the intense degree of solar radiation affected thermal comfort. Method: Thirty eight people were exposed to a range of climatic conditions in the UK. Weather in England does not have extremely hot and cold temperature, and the current study was conducted under warm (summer and autumn) and cool (spring and summer) climates. Measurements of the climate included air temperature, radiant temperature (including solar load), humidity and wind around the subjects. Subjective responses were taken and physiological measurements included internal body temperature, heart rate and sweat loss. Results: This study was conducted under four kinds of environmental conditions and the environmental measurement was performed in September, December, March, and June. The values for sensation, comfort, preference, and pleasantness about four conditions were from 'neutral' to 'warm', from 'not uncomfortable' to 'slightly comfortable', from 'slightly cooler' to 'slightly warmer', and from 'neither pleasant nor unpleasant' and 'slightly unpleasant', respectively. All subjective responses showed differences depending on air temperature and wind speed, and had correlations with air temperature and wind speed (p<0.05). However, subjective responses showed no differences depending on the radiant temperature. The combined effects of environmental parameters were showed on some subjective responses. The combined effects of air temperature and radiant temperature on thermal sensation and pleasantness were significant. The combined effects of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on some subjective responses. In the case of the relationships among subjective responses, thermal sensation had significant correlations with all subjective responses. The largest relationship was shown between preference and thermal sensation but acceptance showed the lowest relationship with the other subjective responses. Conclusion: The ranges of air temperature, radiant temperature, wind speed and solar radiation were $6.7^{\circ}C$ to $24.7^{\circ}C$, $17.9^{\circ}C$ to $56.6^{\circ}C$, $0.84ms^{-1}$ to $2.4ms^{-1}$, and $123Wm^{-2}$ to $876Wm^{-2}$ respectively. Each of air temperature and wind speed had significant relationships with subjective responses. The combined effects of environmental parameters on subjective responses were shown. Each radiant temperature and solar radiation did not show any relationships with subjective responses but the combinations of each radiant temperature and solar radiation with other environmental parameters had influences on subjective responses. The combinations of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on subjective responses although metabolic rate alone hardly made influences on them. There were also significant relationships among subjective responses, and pleasantness generally showed relatively high relationships with comfort, preference, acceptance and satisfaction. Application: Subjective responses might be utilized to predict thermal stress of human and the application products reflecting human subjective responses might apply to the different fields such as fashion technology, wearable devices, and environmental design considering human's response etc.