• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.107.1-107.1
• /
• 2012

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. For improve the quality of white gold, we performed heat treatment on 14K white gold alloys at various age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14K white gold alloys. For solid solution treatment [ST], casted 14K white gold alloy specimens were treated at high temperature ($750^{\circ}C$) during 30 minute, and the specimens dropped to water for quenching immediately. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250^{\circ}C{\sim}300^{\circ}C$). After the heat treatment, we observed increased hardness from 144 Hv to 214 Hv by Vicker's hardness tester. Variation of the grain size measured by optical microscopy (OM) and scanning electron microscopy (SEM) images. By electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. After heat treatment, 14K white gold alloys showed improved hardness and became uniformity of grain size by age-hardening treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.190-193
• /
• 1982

Conclusion: The results of this study are encouraging for the development of a set of interpretable diagnostic criteria for a reasonably reliable identification of some species. The present study has been limited in the characteristics studied and was made on relatively poor photography. Further study on high quality photography, over wider areas and including such additional characteristics as crown texture and shadow intensity should prove useful. A preliminary examination has been made of some photo-image characteristics of a number of important tree species on large scale (1:9,000) contact prints of panchromatic mm. The characteristics studied were crown image tone, and shape. Image tone was estimated against a standard grey-scale and shows within-species consistency and a range between species. Crown shapes were subjectively assessed but there appears to be a within-species consistency and interpretable between-species differences. The results of this trial suggest that it should be practicable to make a number of important species distinctions by photo-interpretation with a useful degree of reliability. Other characteristics beside those studied might be usefully examined. Photography: Hand-printed glossy contact prints of vertical 1:9,000 scale panchromatic photography of Kwangnung Experimental Forest flown May 1964. The filter used is unknown (probably minus-blue). The camera is unknown but was probably a military type K-17 or K-22 with 6"(apostfophy) lens. The photography shows notably poor resolution. Species: 143 individual trees ranging through 11 species (7 softwood, 4 hardwood) were included in the study. A range of size classes were included for each species.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• 한국가구학회지
• /
• 제27권4호
• /
• pp.343-351
• /
• 2016

This study was jointly conducted by the department of nursing science in a college of natural sciences and the furniture design department in the art and physical education to research the critical factors for the furniture development for the Elderly in consideration of the surging number of senior citizens not only in Korea but also globally. On the basis of the Elderly's physical and mental characteristics investigated by the department of nursing science, the furniture design guideline for the Elderly was presented. The following points should be considered at designing the furniture for the Elderly. First, multiple functions like chair with removable toilet bowl and part lighting in bed are advantageous. Second, the dimension of furniture such as chair, bed and sofa should be ergonomically thought in terms of structure for the Elderly's convenience. Third, the bright and vivid color of furniture should be chosen from the aspect of the design, while the different kinds of blue should be avoided. Small patterns and high glossy are not recommendable, but various kinds of feelings in different shapes are suggested. Forth, the material should contribute to the fracture prevention and for that sponge, fabric and leather smoothing the surface of furniture are recommendable as the finishing treatment in a wide variety of colors.

• 한국식품조리과학회지
• /
• 제19권6호
• /
• pp.694-700
• /
• 2003

Changes in the Qualify Properties of Doenjang Prepared using the Powder or extracts of Paecilomyces japonica were investigated during fermentation at 20$^{\circ}C$. The moisture content was increased during fermentation but was not significantly different in all treatments. The pH of Doenjang with p. japonica was lower than the control group and decreased with the fermentation time. The amino nitrogen content increased gradually for up to 60 days and decreased slightly at 90 days. The L, a and b value decreased in proportion to the fermentation period and those of Doenjang with P. japonica powder were the lowest. From the results of the sensory evaluation, the color of the control group was similar to "yellow" but that of the Doenjang made from powder of P. japonica was close to "dark brown" and those of the Doenjang made from the P. japonica extract were darker than that of the control group. The texture was "glossy and smooth" in all cases and preference about the texture was high. The Doenjang with added P. japonica Powder had a saltier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowest.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.703-714
• /
• 2005

The purpose of this study is to acquire various methods for the fashion image coordination and to examine common features of variation of coordination methods according to the trend. It has attained by investigating Men's fashion image coordination through trend analysis in terms of its coordination features and its variety aspects. For this study, it has classified into twelve typical Men's fashion images in collecting 1,291 pieces of photographs on the subject of jackets and pants from Men's fashion collection$(1995\~2002)$. The study has examined methods and features of fashion image coordination by year according to design elements and the harmony between items. In addition, it has drawn common factors in the image coordination. The summary and conclusion are as follows. A year of 1995, it has presented as the essential code of the variation that morphologic aspects of a design in the fashion image coordination. Various designs have developed through the variation of shapes such as shoulder width, shoulder pad, jacket width and its length and so on. In the initial stage, the width of shoulder and jacket has fitted into large pattern and then adjusted elegantly to make fit the body that indicates a dissolution according to an avant-garde image. At the time that over-measurement of the shape has reduced and high quality and variation of materials has gradually become significant. Those are often used that high-quality glossy materials or other materials which are opposite to the basic code of the original fashion image materials and qualities regardless of images. On the pattern and color, in addition, have represented neat and elegant impression with moderate applications rather than quantitative abundance that have used opposite elements to the basic code f3r the change code like materials. Furthermore, before and after 1999, ' it shows that a concept of the total coordination has arisen that increased coordination methods to strengthen and affluent its images for the whole with wearing accessaries such as hats, gloves, sunglasses, mufflers, bags, belts and so on.

• 복식
• /
• 제61권1호
• /
• pp.20-33
• /
• 2011

This study aims to analyze the expressive aspect of men's shirts through examining the characteristics of men's shirts with the trend of men's clothing well represented and considering the image based on high fashion. As a method of study, I have conducted the theoretical study through the literature data, and the content analysis through photographs from S/S collection in 2005 to F/W collection in 2010. Especially, in the recent men's shirts, the materials of glossy silk, wavering chiffon and jersey tend to appear and various images are represented with the tasteful decoration such as ruffle, pin tuck and embroidery together with pastel color. Thus, the result of this study is as follows: Firstly, the masculine and romantic images are researched as the image emphasizing the beautiful and soft masculine beauty which doesn't lose the masculinity even though they are seasonedwith the feminine elements. Soft masculine beauty is emphasized by using romantic image decoration of frills, beads and pin tuck or silk, jersey and openwork materials etc. Secondly, practical fusion images have been studied as the images emphasizing the freshness with practicality through grafting more than two items onto one shirt. Many designs have appeared representing new shapes by grafting more than two items onto one shirt or obscuring the border line between the items. Thirdly, the avant-garde chic images have been researched as the image emphasizing the chick image through representing unique and odd designs by excessively expressing the silhouette in general shapes of shirts. I come. to find that the mainly the designs, emphasizing the uniqueness and the distinction with transformed shapes of sleeves, cuffs and the length of shirts in exaggerated manners, are appearing. Thus, I intend to provide a reference material which will be useful for the newly created design and researches of figurative characteristics in the future fashion.