• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.90-95
• /
• 2008

An SHGC(Solar Heat Gain Coefficient) is a determinant of total flux of solar radiation coming indoor and a critical factor in evaluating heating and cooling load. U-value represents heat loss while SHGC denominates heat gain. Recently, windows with high solar gain, mid solar gain or low solar gain are being produced with the development of Low-E coating technology. This study evaluated changes in energy consumption for heating and cooling according to changes in SHGC when using double-layered Low-E glass and triple layered Low-E glass in relation to double layered clear glass as base glass. An Office was chosen for the evaluation. For deriving optical properties of each window, WINDOW 5 by LBNL, an U.S. based company. and the results were analyzed to evaluate performance of heat and cooling energy on anannual basis using ESP-r, an energy interpretation program. Compared to the energy consumption of the double layered clear glass, the double layered Low-E glass with high solar gain consumed $69.5kWh/m^2,yr$, 9% more than the double layered clear glass in cooling energy. The one with mid solar gain consumed $63.1kWh/m^2,yr$, 1% less than the base glass while the one with low solar gain consumed $57.6kWh/m^2,yr$, 10% less than the base glass. When it comes to tripled layered glass, the ones with high solar showed 2% of increase respectively while the one with mid solar gain and low solar gain resulted 5% and 11% in decrease in energy consumption due to low acquisition of solar radiation. With respect to cooling energy. it was found that the lower the SHGC. the less energy consumption becomes.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.161-165
• /
• 2011

In this paper, a high-efficiency DC-AC converter is used for wireless energy transmission. The DC-AC convertter is implemented by combining the oscillator and power amplifier. Given that the conversion efficiency of a DC-AC converter is strongly affected by the efficiency of the power amplifier, a high-efficiency power amplifier is implemented using a class-E amplifier structure. Also, because of the low output power of the oscillator connected to the input stage of the power amplifier, a high-gain two-stage power amplifier using a drive amplifier is used to realize a high-output power DC-AC converter. The high-efficiency DC-AC converter is realized by connecting the oscillator to the input stage of the high-gain high-efficiency two-stage class-E power amplifier. The output power and the conversion efficiency of the DC-AC converter are 40.83 dBm and 87.32 %, respectively, at an operation frequency of 13.56 MHz.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1888-1892
• /
• 2008

In this paper, a new parallel CMOS self-bias differential amplifier is designed to use in high-speed analog signal processing circuits. The designed parallel CMOS self-bias differential amplifier is developed by using internal biasing circuits and the complement gain stages which are parallel connected. And also, the parallel architecture of the designed parallel CMOS self-bias differential amplifier can improve the gain and gain-bandwidth product of the typical CMOS self-bias differential amplifier. With 1.8V $0.8{\mu}m$ CMOS process parameter, the results of HSPICE show that the designed parallel CMOS self-bias differential amplifier has a dc gain and a gain-bandwidth product of 64 dB and 49 MHz respectively.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1471-1476
• /
• 2018

In this paper, a high-gain antenna for satellite communication is proposed. The proposed antenna consists of septum polarizer, circular waveguide, Hat-feed structure that has a high-gain and efficiency. Especially, it is smaller and lighter than the conventional satellite communication antennas by applying a hat-feed structure. The measured results show that received gain of proposed antenna is better than 29.9 dBi and transmitted gain of proposed antenna is better than 30.5 dBi. The co-polarized and cross-polarized radiation patterns comply with ITU-RR Ap.8 and ITU-R S.731-1 that are recommended by International Telecommunication Union. The designed high-gain antenna for satellite communication is expected to be used for OTM and airborne satellite systems.

• 한국통신학회논문지
• /
• 제17권1호
• /
• pp.68-79
• /
• 1992

고속 아날로그 시스템,위성통신시스템, video signal processing 및 processing 및 optical fiber interface 회로등에서 높은 전자이동도로 인하여 고주파 툭성이 우수한 GaAs 연산 증폭기는 필수적인 구성 요소이다. 하지만, 낮은 전달컨덕턱스 및 low frequency dispersion등의 현상 때문에 높은 전압이득을 얻을 수 없다는 단점을 가지고 있다. 따라서 본 논문에서는 GaAs MESFETfmf 이용한 증폭기의 이득을 증가시키기 위한 기법을 비교분석하고 기존의 전류미러와 새로운 구성의 전류 미러를 설계하여 회로의 안정화를 꾀하였다. 높은 차동전압이득을 얻기 위하여 단일 증폭기의 bootstrap 이득증가기법을 이용하여 차종입력 회로를 구성하였으며, 회로의 안정도 및 우수한 주파수 특성을 얻기 위하여 common mode feedback을 사용하였다. Pspice를 통한 시뮬레이션 결과 설계된 회로의 이득이 18.6dB 향상되었고 안정도 및 주파수 특성면에서 우수함을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제31권3A호
• /
• pp.356-359
• /
• 2006

A monolithic SiGe HBT variable gain driver amplifier(VGDA) with high dB-linear gain control and high linearity has been developed as a driver amplifier with ground-shielded microstrip lines for 5-GHz transmitters. The VGDA consists of three blocks such as the cascode gain-control stage, fixed-gain output stage, and voltage control block. The circuit elements were optimized by using the Agilent Technologies' ADSs. The VGDA was implemented in STMicroelectronics' 0.35${\mu}m$ Si-BiCMOS process. The VGDA exhibits a dynamic gain control range of 34 dB with the control voltage range from 0 to 2.3 V in 5.15-5.35 GHz band. At 5.15 GHz, maximum gain and attenuation are 10.5 dB and -23.6 dB, respectively. The amplifier also produces a 1-dB gain-compression output power of -3 dBm and output third-order intercept point of 7.5 dBm. Input/output voltage standing wave ratios of the VGDA keep low and constant despite change in the gain-control voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1652_1653
• /
• 2009

본 논문에서는 passivity based controller에 high gain observer를 접목시킨 유압 모터의 위치 제어기를 제시 한다. 본 논문에서는 5차 비선형 동역학 모델을 사용 하였다. Passivity based controller는 유압 모터의 높은 위치 추정능력을 구현하지만 그것을 위해서는 유압 모터의 상태 및 부하의 정보를 알아야 한다. 상태 및 부하의 정보를 추정 하기 위하여 high gain observer를 제안하였다. High gain observer을 사용함으로서 유압 모터와 부하의 동역학의 비선형성을 줄여 상태 및 부하를 효과적으로 추정 하였다. 유압 모터의 위치 제어 성능 및 부하의 관측 능력 평가를 위하여 Matlab/Simulink를 이용하여 모의 실험을 구현 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.480-483
• /
• 2003

This paper deals with speed control of Sensorless DC servo motor using a FTHGO(FuzEy-Tuning High Gain observer). In this paper, we improved the problem from row speed section, the problem of sensor for detecting speed of motor, using FTHGO(Fuzzy-Tuning High-Gain Observer) with fuzzy control technique which is a class of adaptive control technique. In order to verify the performance of the FTHGO(Fuzzy-Tuning High Gain Observer) which is proposed in this paper, it is proved from the experiment to compare the case with a speed sensor to the case with FTHGO(Fuzzy-Tuning High Gain observer) in the speed control of DC servo motor.

• Journal of electromagnetic engineering and science
• /
• 제13권3호
• /
• pp.165-172
• /
• 2013

This paper describes a design for a spiral antenna with a conical wall to obtain the high gain. The gain and the axial ratio of the spiral antenna were improved by a new design that included a conical wall and an optimized Archimedean slit on the ground plane in a conventional antenna with a circular cavity wall and a 4.5-turn slit. A gain improvement of 9.5 dBi higher and a good axial ratio of 1.9 dB lower were measured by the added conical wall and the newly designed slit from the current distribution control on the ground plane, respectively. The measured return loss, gain and axial ratio of the proposed antenna showed a good agreement with the simulated results. The proposed antenna will be applied to a non-linear junction detector system.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.45-49
• /
• 2009

본 논문에서는 900Mhz 대역의 UHF RFID에서 직접변환방식의 LNA/Mixer를 설계하였다. 설계된 회로는 3.3V로 동작하며, 0.18um CMOS 공정으로 구현되었다. 본 논문은 높은 self jamming 신호를 극복하기 위해 공통게이트 입력 구조를 사용하였으며, 고이득, 저이득의 두 가지 동작 모드를 갖도록 설계되었다 측정결과, 설계된 LNA/Mixer는 고이득 모드와 저이득 모드에서 각각 4dBm과 11dBm의 입력 p1dB를 갖고, 12dB와 3dB의 변환이득을 갖는다. 또한, 두 가지 모드에서 각각 60mW와 79mW의 전력을 소비하며, 16dB와 20dB의 잡음지수를 갖는다.