• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1258-1259
• /
• 2008

In this paper, the variable tendency of the piezoelectric constant and resonance characteristics of the piezoelectric ceramics due to the electric field is studied. The practical application of piezoelectric ceramics is not only applied in field of small signal. For example, in case of an ultrasonic motor, 120 ${\sim}$ 130Vrms of driving voltage is needed. Therefore, to examine the characteristics of piezoelectric ceramics in large signal contributes to reducing the susceptibility to the multifarious application and securing the ease of the production of control circuit. These contributions may be connected to the expansion of industrial application. We fabricated disk-type piezoelectric ceramic samples by using conventional method and measured the resonance characteristics of these samples under from low to high voltage driving conditions. According to increasing the value of the input voltage, we measured the resonance frequency of the piezoelectric ceramic, and inquired into the cause of these phenomena.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.661-662
• /
• 2015

최근 친환경적인 기술 개발에 대한 요구가 증가함에 따라 기존 엔진의 역할을 직접적으로 대체하게 되는 전기자동차용 전동기에 대한 연구가 활발히 진행되고 있다. 영구자석을 사용한 전동기의 경우, 계자 권선이 없기 때문에 회전자 동손이 없어지면서 효율이 높아지는 장점이 있지만 온도 상승 및 과부하 등으로 인한 영구자석의 불가역 감자로 인한 고장 가능성이 존재한다. 본 논문에서는 이러한 영구자석 감자현상을 진단하기 위한 방법 중 하나로 회전자 구속 조건에서 저전압 고주파 주입을 통한 입력전류 파형의 스펙트럼 분석을 제안한다. 제안한 방법은 전동기의 회전자를 구속시킨 상태에서 진단신호를 입력하고 인버터의 출력전류 파형을 측정하여 스펙트럼 분석을 수행하는 방법이다. 제안한 방법은 시뮬레이션을 통해 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.745-749
• /
• 2003

The iterative sliding mode observer is proposed to control sensorless PMSM(Permanent Magnet Synchronous Motor). Proposed sliding mode observer has the character which is robust to the disturbance and parameter variation. Low pass filter with the variable cutoff frequency is also proposed to compensate rotor angle, it is led to saving memory and minimizing operation time. Experimental results shows that the proposed sliding mode observer leads to the proper performance.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.1
• /
• pp.30-36
• /
• 2004

An iterative sliding mode observer is proposed to sensorless control of a PMSM(Permanent Magnet Synchronous Motor). The proposed sliding mode observer has the character which is robust to the disturbance and parameters variation. A low pass filter with the variable cut-off frequency is also proposed to compensate the delay of the rotor angle according to the rotor speed, it is led to save memory and minimize operation time. Experimental results show that the proposed sliding mode observer leads to the proper performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.169-174
• /
• 2012

Reduction unit is one of the most important components for railway vehicle because torque of motor must be transmitted to wheels of vehicle by reduction unit. However, According to advanced studies, it has been often broke down due to the damage, fatigue and wear of gear. To solve this problem, defect diagnosis methods of gear have been mainly using the vibration diagnosis technology through vibration waveform and frequency analysis. However, We should know vibration characteristics of normal state reduction unit prior to defect diagnosis. So in this paper, We had analyzed vibration characteristics of reduction unit in order to utilize monitoring system development. Comparison of targets is the vibration characteristics of normal state reduction unit about Electric Multiple Unit(EMU) and the High-speed trains(KTX, KTX II).

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.93-97
• /
• 1988

The sliding mode control is an effective method to establish robustness against parameter variations and disturbance. But, in sliding mode strategy, the control function is discontinuous on the hyperplane. Consequently, the control input chatters at high frequency. When we apply such a control to the induction motor drive system, that causes a torque ripple and current harmonics, which are harmful to the system. In this paper, we introduce a low pass filter between sliding mode control output and driver input to overcome that problem. The band-width of this filter is varied according to the error funtion to improve transient responses.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.552-554
• /
• 1987

A design principles of discontinuous control are studied and then are applied to position control of D. C. sevo drive fed by a four-quadrant chopper. Variable structure control with sliding mode gives fast dynamic response with no overshoot. And the resulting system bas good robust properties independent of the wide variations of electrical, mechanical parameters and external disturbances without any system identification. But the high frequency chatter component of control input in the sliding mode is undesirarable. A continuous control law that is a approximation to discontinuous control law is used for design.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.96-102
• /
• 1998

This paper describes the design of the digital controller for Full-Bridge Phase-shifted converter with zero-voltage switching (ZVS). Although digital control techniques are widely used in the area of inverters and motor drives, their use for the control of high-frequency switching power supply is still rare. Therefore, this paper presents design method of digital controller of Full-Bridge Phase-shifted converter with zero-voltage switching (ZVS) and compares with conventional analog controller. The controller design is optimized by running computer simulation with the MATLAB numerical calculation package.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.514-521
• /
• 2008

Many research works for improving a boundary lubrication performance have been executed by using solid lubricants, and been tried to apply an engine lubrication. However those general lubricants have not been applied on engines due to the extreme conditions such as very high temperature and pressure during combustion process in a cylinder. In this study a lubricant containing copper alloy nano-powder is applied on a diesel engine driven by an electric motor. Torques and shaft vibrations are measured, then an engine friction loss and rotating stability are assessed. The results show that the frequency of the vibration is about the same as that of a general lubricant, but the amplitudes in the both X and Y direction are reduced as well as the friction loss is reduced.