• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.138-138
• /
• 1999

• 대한전자공학회논문지SD
• /
• 제42권3호
• /
• pp.1-8
• /
• 2005

본 논문에서는 $0.1\;{\mu}m$ 이하의 게이트 길이를 갖는 MHEMT의 DC 및 RF 특성을 상용 시뮬레이터인 ISE-TCAD tool을 이용하여 결과를 고찰하였다. 이후 MHEMT의 게이트 길이와, 소스-드레인 간격 및 채널 두께를 변화시켜 가면서 소자의 수평, 수직 Scaling효과가 소자 특성에 미치는 영향을 비교하였으며, 게이트 길이 $(L_g)$가 $0.1\;{\mu}m$ 이하로 감소함에 따라 $g_{m,max}$가 같이 감소하는 현상에 대해서 논의해 보았다. 또한 이 현상을 가지고 소자의 횡적, 종적 파라미터의 scaling 효과에 대한 모델을 제시 했다.

• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.49-53
• /
• 2010

Microstructural origins of leakage current and physical degradation during operation in product-quality AlGaN/GaN high electron mobility transistor (HEMT) devices were investigated using photon emission microscopy (PEM) and transmission electron microscopy (TEM). AlGaN/GaN HEMTs were fabricated with metal organic chemical vapor deposition on semi-insulating SiC substrates. Photon emission irregularity, which is indicative of gate leakage current, was measured by PEM. Site specific TEM analysis assisted by a focused ion beam revealed the presence of threading dislocations in the channel below the gate at the position showing strong photon emissions. Observation of electrically degraded devices after life tests revealed crack/pit shaped defects next to the drain in the top AlGaN layer. The morphology of the defects was three-dimensionally investigated via electron tomography.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.345-355
• /
• 2011

GaAs나 InP 기반의 high electron mobility transistor (HEMT) 소자들은 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 우수한 저잡음 특성을 가지고 있다. GaAs 기판 위에 점진적으로 성장된 메타몰픽(Metamorphic) HEMTs (MHEMTs)는 InP 기판 위에 성정한 HEMT에 비해 비용 측면에서 커다란 장점을 가지고 있다. 본 논문에서는 이러한 MHEMT의 DC/RF 소신호 특성을 예측하기 위하여 InAlAs/InGaAs/GaAs MHEMT 소자들의 DC/RF 소신호 주파수 특성을 시뮬레이션하였다. 2차원 소자 시뮬레이터의 hydrodynamic 전송 모델을 사용하여 $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ 이종접합 구조를 갖는 제작된 0.1-${\mu}m$ ${\Gamma}$-게이트 MHEMT 소자에 대하여 파라미터 보정 작업을 수행한 후, MHEMT 소자들에 대해 DC 특성 및 RF 소신호 주파수 특성을 시뮬레이션하고 실험 데이터와 비교 분석하였다. 또한, 게이트 리세스 구조에 따른 MHEMT 소자들의 DC/RF 특성을 시뮬레이션하고 비교 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2505-2511
• /
• 2014

Indium oxide nanocrystals ($In_2O_3$ NCs) with sizes of 5.5 nm-10 nm were synthesized by hot injection of the mixture precursors, indium acetate and oleic acid, into alcohol solution (1-octadecanol and 1-octadecence mixture). Field emission transmission electron microscopy (FE-TEM), High resolution X-Ray diffraction (X-ray), Nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FT-IR) were employed to investigate the size, surface molecular structure, and crystallinity of the synthesized $In_2O_3$ NCs. When covered by oleic acid as a capping group, the $In_2O_3$ NCs had a high crystallinity with a cubic structure, demonstrating a narrow size distribution. A high mobility of $2.51cm^2/V{\cdot}s$ and an on/off current ratio of about $1.0{\times}10^3$ were observed with an $In_2O_3$ NCs thin film transistor (TFT) device, where the channel layer of $In_2O_3$ NCs thin films were formed by a solution process of spin coating, cured at a relatively low temperature, $350^{\circ}C$. A size-dependent, non-monotonic trend on electron mobility was distinctly observed: the electron mobility increased from $0.43cm^2/V{\cdot}s$ for NCs with a 5.5 nm diameter to $2.51cm^2/V{\cdot}s$ for NCs with a diameter of 7.1 nm, and then decreased for NCs larger than 7.1 nm. This phenomenon is clearly explained by the combination of a smaller number of hops, a decrease in charging energy, and a decrease in electronic coupling with the increasing NC size, where the crossover diameter is estimated to be 7.1 nm. The decrease in electronic coupling proved to be the decisive factor giving rise to the decrease in the mobility associated with increasing size in the larger NCs above the crossover diameter.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권1호
• /
• pp.18-22
• /
• 2005

We have proposed and fabricated a dual gate AlGaN/GaN high electron mobility transistor (HEMT), which exhibits the low leakage current and the high breakdown voltage for the high voltage switching applications. The additional gate between the main gate and the drain is specially designed in order to decrease the electric field concentration at the drain-side of the main gate. The leakage current of the proposed HEMT is decreased considerably and the breakdown voltage increases without sacrificing any other electric characteristics such as the transconductance and the drain current. The experimental results show that the breakdown voltage and the leakage current of proposed HEMT are 362 V and 75 nA while those of the conventional HEMT are 196 V and 428 nA, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.32-35
• /
• 2013

In this paper, a manufacturing process was developed for fabricating high-quality AlGaN/GaN high electron mobility transistors (HEMTs) on silicon carbide (SiC) substrates. Various conditions and processing methods regarding the ohmic contact and pre-metal-deposition $BCl_3$ etching processes were evaluated in terms of the device performance. In order to obtain a good ohmic contact performance, we tested a Ti/Al/Ta/Au ohmic contact metallization scheme under different rapid thermal annealing (RTA) temperature and time. A $BCl_3$-based reactive-ion etching (RIE) method was performed before the ohmic metallization, since this approach was shown to produce a better ohmic contact compared to the as-fabricated HEMTs. A HEMT with a 0.5 ${\mu}m$ gate length was fabricated using this novel manufacturing process, which exhibits a maximum drain current density of 720 mA/mm and a peak transconductance of 235 mS/mm. The X-band output power density was 6.4 W/mm with a 53% power added efficiency (PAE).

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.148-151
• /
• 2011

We designed and fabricated aluminium gallium nitride (AlGaN)/GaN high electron mobility transistors (HEMTs) with stable reverse blocking characteristics established by employing a selective fluoride plasma treatment on the drainside gate edge region where the electric field is concentrated. Implanted fluoride ions caused a depolarization in the AlGaN layer and introduced an extra depletion region. The overall contour of the depletion region was expanded along the drift region. The expanded depletion region distributed the field more uniformly and reduced the field intensity peak. Through this field modulation, the leakage current was reduced to 9.3 nA and the breakdown voltage ($V_{BR}$) improved from 900 V to 1,400 V.

• 한국재료학회지
• /
• 제7권5호
• /
• pp.390-396
• /
• 1997

AIGaAs/InGaAs/GaAs high electron mobility transisters(HEMT)소자의 오믹 접합재료로 일반적으로 사용되고 있는 AuGeNi의 접합저항과 열적 안정성을 향상시키기 위한 새로운 접합재료에 대해 연구하였다. 이를 위해 sub/M$_{1}$Au-Ge/M$_{2}$Au의 구조에서 M$_{1}$을 Ni과 Pd, M$_{2}$를 Ni, Ti, Mo로 하였을 경우의 접합 재료에 대한 오믹 접합 특성의 변화를 조사하였다. 또한 일반 열처리로와 램프 히터를 이용한 고속 열처리에 따른 오믹 특성을 조사하였다. M$_{1}$을 Ni에서 Pd으로 대체하였을 경우 접합 저항은 약간 증가하였으며 접합 특성의 개선을 관찰되지 않았다. M$_{2}$를 Ni에서 Ti이나 Mo로 대치하였을 경우, 접합 저항은 감소하였고 열적 안정성과 접합 형상은 현저히 개선되었다. 특히 Ni/Au-Ge/Mo/Au의 접합재료는 급속 열처리에 의해 -0.1Ωmm의 극히 낮은 잡합 저항과 우수한 접합 형상을 갖는 것으로 조사되었다.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.364-369
• /
• 2011

Analyzing electrical degradation of polycrystalline silicon transistor to applicable at several environment is very important issue. In this research, after fabricating p channel poly crystalline silicon TFT (thin film transistor) electrical characteristics were compare and analized that changed by gate bias with first measurement. As a result on and off current was reduced by variation of gate bias and especially re duce ratio of off current was reduced by $7.1{\times}10^1$. On/off current ratio, threshold voltage and electron mobility increased. Also, when channel length gets shorter on/off current ratio was increased more and thresh old voltage increased less. It was cause due to electron trap and de-trap to gate silicon oxide by variation of gate bias.