• 한국조리학회지
• /
• 제3권
• /
• pp.165-179
• /
• 1997

Cost-volume-profit analysis shows the relationship between these factors. The figures expressed in a break-even chart can be used planning control and decision making. The relation ships can also be helpful in understanding how all costs must be covered in menu pricing. Involved in these relationship is the contribution to overhead and profit, or contribution ratio. This study used the food service operation of H hotel. Assumed the FC would be 10% of the High Volume, the VC would be 76% of the high volume. And in the CVP of individual meals, selected labor cost of the VC, assumed labor cost would be 35% of the volume.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.180-184
• /
• 2001

The high operation frequency mainly reduces transformer volume in the power supply. A high frequency and high voltage pulse transformer is designed, fabricated, and tested. Switching frequency of the transformer is 100 kHz. Input and output voltages of the transformer are 250 V and 4 kV, respectively. Normal operation power of the transformer is 3 kW. Maximum volume of the transformer is 400 $cm^3$. The power density is thus 7.5 W/$cm^3$. The transformer will be installed in a metal box that has nominal operation temperature of 85 degree centigrade. The transformer and other high voltage components in the box will be molded with Silicon RTV(Room Temperature Vulcaniza) that has a very low thermal conductivity. Procedure of design and test results are discussed. Analytical as well as experimental results of varous paramters such as transformer loss, leakage inductance, distributed capacitance are also discussed. In addition, thermal analysis results from ANSYS code for three different operation conditions are discussed.

• 한국항공운항학회지
• /
• 제19권2호
• /
• pp.37-44
• /
• 2011

This paper summarizes the HVO concept and procedures, presents a summary of the research and results, and outlines areas where future HVO is required. This concept enables people to get their destinations through shortest paths with advanced air traffic control system and equipments. The concept's key feature is that pilots maintain their own separation from other aircraft using air-to-air datalink and on-board software which are needed for supporting flight information present on the high Way in the sky display and airborne internet. By assigning Self-Controlled Area which assume pilot have separation responsibility, controllers evaluated SATS HVO concept as a successful method on the view of reduced workload and increased traffic level on high volume operation.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.19-25
• /
• 2007

This experimental study was carried out to obtain both low emissions and high thermal efficiency by rapid bulk combustion. Two kinds of experiments were conducted to obtain fundamental data on the operation of a RI engine by a radical ignition method. First, the basic experiments were conducted to confirm rapid bulk combustion by using a radical ignition method in a constant volume chamber (CVC). In this experiment, the combustion velocity was much higher than that of a conventional method. Next, to investigate the desirable condition of engine operation using radical ignition, an applied experiment was conducted in an actual engine based on the basic experiment results obtained from CVC condition. A sub-chamber-type diesel engine was reconstructed using a SPI type engine with controlled injection duration and spark timing, and finally, converted to a RI engine. In this study, the operation characteristics of the RI engine were examined according to the sub-chamber's specifications such as the sub-chamber volume and the diameter and number of passage holes. These experimental results showed that the RI engine operated successfully and was affected by the ratio of the passage hole area to the sub-chamber volume.

• 대한인간공학회지
• /
• 제23권2호
• /
• pp.93-104
• /
• 2004

The research subjects of this study were 30 unmarried Korean women from 20 to 29 who had never had an operation on their breast. Measurement method using plaster breast mold was used for measuring their volume of breast. The correlation between their breast volume and the methods to set up brassiere cups with the existing method and with their circumference of breast was analyzed using KendalI's Coefficient. which was to figure out a method which had a bigger correlation with the volume of breast between the method to set up brassiere cups using the existing method and the method using the circumference of breast. The results analyzed showed that the coefficient of correlation between the existing method and the volume of breast was .12 and the significance level was .45. They didn't have any correlation. On the other hand. the coefficient of correlation between the circumference of breast and the volume of breast was .82. which was very high values and the significance level was very high .0001. Therefore. it turned out that it was difficult to set up brassiere cups by using the existing method and it was easier and more reliable to set up the cups by using the circumference of breast.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.418-424
• /
• 2005

We present the design, fabrication and experimental results of 4-bit digital microinjectors, whose ejected droplet volumes are adjusted by the digital operation of a 4-bit microheater array. We design the reference microinjectors as well as its comparative test structures. In the fabrication process, we use a five-mask micromachining process and the total chip size of the fabricated microinjector is $7,640{\mu}m{\times}5,260{\mu}m.$ We measure the ejected droplet volumes and velocities, which are adjusted from $12.1{\pm}1.0~55.6{\pm}14.7pl\;and\;2.3{\pm}0.1~15.7{\pm}0.8m/s.$ respectively, depending on the 15 possible combinations of 4-bit microheater array. We also experimentally characterize the effect of geometric variation including the microheater size, inter-microheater gap, microchannel width and sequential operation of microheater array on the ejected droplet volume and velocity. Among these parameters, we find that the microheater size is the most dominant parameter affected to the ejected droplet volumes and velocities. Thus, the present microinjector has a potential for application to the high-resolution inkjet printers with multiple gray levels or high-precision fluid injectors with variable volume control.

• 방사성폐기물학회지
• /
• 제20권2호
• /
• pp.243-253
• /
• 2022

Spent filters with a high radiation dose rate of 2 mSv·hr^-1 or more are not easily managed. So far, the Korean policy for spent filter disposal is to store them temporarily at nuclear power plants until the waste filters can be easily managed. Nuclear power plant decommissioning in Korea is starting with Kori unit 1. Volume reduction of waste generated during decommissioning can reduce the cost and optimize the space usage at disposal site. Therefore, efficient volume reduction is a very important factor during the decommissioning process. A conceptual method, based on the experiences of developing 200 and 800 ton compactors at Orion EnC, has been developed considering worker exposure with the followings a crusher (upgrade of compaction efficiency), an automatic dose measuring system with a NaI(Tl) detector, a shield box, an inner drum to prepare for easy handling of drums and packaging, a 30 ton compactor, and an automatic robot system. This system achieves a volume reduction ratio of up to 85.7%; hence, the system can reduce the disposal cost and waste volume. It can be applied to other types of wastes that are not easily managed due to high dose rates and remote control operation necessity.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권12호
• /
• pp.677-684
• /
• 2016

사실적인 볼륨 렌더링을 위해서는 음영처리 뿐만 아니라 조명 효과를 계산하는 것이 필수적이다. 높은 품질의 결과영상을 만들어내기 위해서는 전역 조명을 표현할 필요가 있는데, 빛의 직접적인 영향과 산란에 따른 간접적인 영향을 고려해야 한다. 이러한 연산을 수행하기 위해서는 많은 자원이 필요하고, 특히 볼륨 데이터처럼 대용량의 데이터로 렌더링 할 때는 매우 많은 비용이 소모된다. 본 논문에서는 각 재질에 대해 물리적 법칙에 따른 산란자 템플릿을 생성한다. 각 물체들이 가지는 재질 특성을 고려하여 램버트 조명 모델을 기반으로 템플릿의 광자들을 저장한다. 본 논문에서 볼륨 렌더링을 할 때, 볼륨 내부에서 샘플링 되는 복셀을 기준으로 템플릿에 저장된 광자를 이용해 차폐를 검사하고, 산란에 따른 전역 조명을 표현한다. 재질별로 템플릿을 생성하기 때문에 매우 복잡한 물질들로 구성된 것만 아니라면 적은 자원을 필요로 하며, 간단한 연산을 통해 적은 비용으로 볼륨 내부의 산란을 표현할 수 있다.

• 한국광학회지
• /
• 제8권3호
• /
• pp.241-244
• /
• 1997

체적 홀로그램을 저장하고 재생하는데 있어서 광섬유에서 유도되는 스페클 패턴을 이용하는 것을 제안하고, 이를 이론 및 실험적으로 연구하였다. 기준빔으로 광섬유에서 회절되는 스페클 패턴을 이용한 홀로그램 위치 다중화 구조는, 스페클 패턴의 상대적 위치 차이에 따라 상관 관계가 없어지는 특징을 이용하기 때문에 좋은 횡방향 위치 선택도를 가지게 하며 축방향 움직임에 대해서는 둔감한 안정성을 보여준다. 따라서 이러한 구조를 광 정보 저장 장치에 적용하면 저장 밀도를 높일 수 있으며 홀로그램 재생시의 안정도를 증가시킬 수 있다.

• The Korean Journal of Pain
• /
• 제8권1호
• /
• pp.159-163
• /
• 1995

Accidental high epidural block is a rare but serious complication. It can result from many factors, which include the volume and concentration of drug, posture, puncture site, age, pregnancy or intra-abdominal mass, and patients' height and weight. We had a case of accidental high epidural block recently. This is a case report which was confirmed by an epiduragram. A healthy 50-year-old woman with a huge uterine myoma was scheduled for a total abdominal hysterectomy under continous epidural analgesia. Epidural catheterization was carried out smoothly. However, an unexpected hypotension was noticed after an epidural injection of 2% lidocaine 25 ml. Thereafter, the patient was intubated and her respiration was controlled during the operation. Using the 5mg of ephedrine, her blood pressure and pulse were well maintained. The scheduled operation was carried out for one hour uneventfully, but after the operation, she felt paresthesia on her hands in the recovery room. To differentiate between the high epidural and the subdural blocks. We injected 5 ml of a water soluble Niopam 300 through the catheter postoperatively. It was observed on the epiduragram that the catheter was placed in the epidural space. It was suggested that the high epidural block was induced from the widespread diffusion through the narrowed epidural space due to the engorgement of the epidural venous plexus by the patient's huge uterine myoma.