• Journal of Applied Biological Chemistry
• /
• 제43권4호
• /
• pp.250-253
• /
• 2000

The effects of high relative humidity (RH) on the physicochemical properties and microbial activity of mature green tomatoes ('Dombito') during refrigerated storage were determined at three temperatures (5, 10, and $15^{\circ}C$) and four different RH levels (91, 94, 97, and 99%). At each temperature, the weight loss rates of tomatoes at different levels of RH were significantly (p<0.05) different from each other. For the samples stored at $10^{\circ}C$, the weight losses were generally higher than those for the samples at $15^{\circ}C$ within the same RH level (i.e., greater vapor pressure deficit). The color change rates ('a' value) showed positive slopes, indicating that the tomato color was changing from green to red. Neither bacteria nor fungi caused visible damages to the samples, and the microbial counts were below 650 colony forming units/$cm^2$ during the test period.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.168-170
• /
• 2007

Sn-Bi eutectic solder alloy have is good wetting and physical properties. The results of solder paste properties test, melting point is about $139^{\circ}C$ and spread test is represent spread properties of $7{\sim}16%$. The results of shear strength after as reflowed, thermal shock test, high temperature storage test of 500hr and 1000hr at $100^{\circ}C$. The shear strength value range is from 6000 to 11000gf, pull strength value range is from 2200 to 3300gf.

• 한국식품영양학회지
• /
• 제21권4호
• /
• pp.510-517
• /
• 2008

Effects of addition of Chinese chives into frozen noodle on retrogradation of the cooked frozen noodle were examined by enzymatic evaluation during the storage 3 days at $4^{\circ}C$. The retrogradation rate during storage was significantly reduced by addition Chinese chives. Thus we hypothesized that retarogardation and textural changes of frozen noodle might be linked to thermostable amylase in Chinese chives. The amylase isolated from Chinese chives was affected by temperature and pH of buffer used. The enzyme was mainly extracted 20 mM potassium phosphate buffer(pH 7.0). The enzyme was extremly stable at wide temerature and pH. Amylase activity was maximal at $50^{\circ}C$ and pH 7.5. The enzyme was not inactivated by heat treatment at $70^{\circ}C$, $80^{\circ}C$ for 30 min. We suggest the enzyme was stable at high temperature. To investigate the effect of different storage packge on texture properties, color, sensory evaluation, parent-packged and unparent packaged frozen noodle was compared with control. As the storage passed, the frozen noodle packaged with parent showed a rapid decrease in the color. The hardness was gradually decreased during storage. It was found that unparent packged must be nessasry in the Chinese chives frozen noodle. In changes of sensory properties by traind panel, Chinese chives frozen noodle with 2% blanched Chinese chives got the highest score in overall acceptability, therefore we tried acceptance test by consumers with 2% blanched frozen Chinese chives noodle.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.162-167
• /
• 2011

Thermal storage plays an important role in building energy saving, which is greatly assisted by the incorporation of latent heat storage in building materials. A phase change material is a substance with a high heat of fusion which, melting and solidifying at a certain temperature, can be storing and releasing large amount of energy. Heat is stored or released when the material changes from solid to liquid. Integration of building materials incorporating PCMs into the building envelope can result in increased efficiency of the built environment. The aim of this research is to identify thermal performance of PCMs impregnated building materials which is applied to interior of building such as gypsum and red clay. In order to analyze thermal performance of phase change materials, test-cell experiments and simulation analysis were carried out. The results show that micro-encapsulated PCM has an effect to maintain a constant indoor temperature using latent heat through the test-cell experiments. PCM wallboard makes it possible to reduce the fluctuation of room temperature and heating and cooling load by using EnergyPlus simulation program. Phase change material can store solar energy directly in buildings. Increasing the heat capacity of a building is capable of improving human comfort by decreasing the frequency of indoor air temperature swings so that the interior air temperature is closer to the desired temperature for a long period of time.

• 한국지열·수열에너지학회논문집
• /
• 제14권3호
• /
• pp.1-7
• /
• 2018

In this paper, we designed a seasonal geothermal storage system and studied the applicability in the alluvial aquifer. We conducted a basic survey to apply this system to greenhouses actually operated in the Geum river basin alluvial aquifer. After choosing a potential area through electrical resistivity survey, the system parameters were set using drilling survey and pumping test result. We installed a system based on the factors, and operated for about 9 months. As a result, high temperature water(injection temperature $30^{\circ}C$) was stored at 22.5 Mcal ($1,609m^3$) for 3 months in cooling operation and 125 Mcal ($16,960m^3$) of low temperature water (injection temperature $7^{\circ}C$) were stored for 6 months in the remaining heating operation.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.27-32
• /
• 2010

Cu pillar 범프와 Sn 패드로 구성된 플립칩 접속부를 형성한 후, Sn 패드의 높이에 따른 Cu pillar 플립칩 접속부의 열 싸이클링 및 고온유지 신뢰성을 분석하였다. Cu pillar 플립칩 접속부를 구성하는 Sn 패드의 높이가 5 ${\mu}m$에서 30 ${\mu}m$로 증가함에 따라 접속저항이 31.7 $m{\Omega}$에서 13.8 $m{\Omega}$로 감소하였다. $-45^{\circ}C{\sim}125^{\circ}C$ 범위의 열 싸이클을 1000회 인가한 후에도 Cu pillar 플립칩 접속부의 접속저항의 증가가 12% 이하로 유지되었으며, 열 싸이클링 시험전과 거의 유사한 파괴 전단력을 나타내었다. $125^{\circ}C$에서 1000 시간 유지시에도 Cu pillar 플립칩 접속부의 접속저항의 증가가 20% 이하로 유지되었다.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.831-838
• /
• 2014

Chip on glass (COG) bonding using anisotropic conductive film (ACF) is a key technology to assemble a driver IC onto a LCD glass panel. In this paper, an experimental investigation was conducted to investigate the correlation between contact resistance and characteristics of image taken by machine vision based inspection system. The results show that the contact resistance was strongly influenced by the contrast ratio of conductive particle rather than the number of conductive particles. Also, number of conductive particles whose contrast ratio is below 0.75 is crucial for determining the quality of the assembled samples. On the other hand, in the result of high temperature high humidity storage test, the contrast ratio of samples was increased. However, in the case of open-circuit samples after temperature humidity storage test, the number of conductive particles whose contrast ratio is above 0.75 was more than that of the closed-circuit samples.

• Corrosion Science and Technology
• /
• 제11권5호
• /
• pp.196-204
• /
• 2012

Corrosion failure of petrochemical facilities is one of the difficulties in maintenance, since operating conditions of crude oil production, storage, and refinement are very aggressive. UNS N08810, which has been used for crude oil transportation pipes and storage tanks in petrochemical industries, shows good resistance to general corrosion and localized corrosion in several environments. Among its environments, UNS N08810 showed better corrosion resistance in fuel gas containing sulfuric acid and phosphoric acid and sulfur. However, ductility and toughness at high temperature over about $500^{\circ}C$ were greatly reduced due to microstructural change. In general, welding process is the representative method to join the parts in industrial components. Because the alloy by welding can be sensitized and corroded, the manufacturing process should be controlled. In this work, UNS N08810 was used and heat treatment conditions including solution and stabilization treatments were controlled. Oxalic acid etch test by ASTM A262 Practice A was done to evaluate the qualitative sensitization in room temperature. Huey test by ASTM A262 Practice C was done to evaluate the intergranular corrosion rate in boiling 65% $HNO_3$ solution. Also, the microstructure by thermal history was analyzed. Experimental alloy showed high intergranular corrosion rate and its corrosion mechanism was elucidated.

• 터널과지하공간
• /
• 제2권2호
• /
• pp.224-236
• /
• 1992

It is very important to determine the thermo-mechanical characteristics of the rock mass surrounding the repository of radioctive waste and the LPG storage cavern. In this study, Hwasoon-Shist. Dado-Tuff adn Chunan-Tonalite were the selected rock types. Temperature dependence of the mechanical properteis such as uniaxial compressive strength, tensile strength, Young's modulus was investigated by measuring the behaviour of these properties due to the variation of temperature. Also, the characteristics of strength and deformation of these rocks were examined through high-temperature triaxial compression tests with varing temperatures and confining pressures. Important results obtained are as follows: In high temperature tests, the uniaxial compressive strength and Yong's modulus of Tonalite showed a sligth increase at a temperature up to 300$^{\circ}C$ and a sharp decrease beyond 300$^{\circ}C$, and the tensile strength showed a linear decrease with increasing heating-temperature. In high-temperature triaxial compression test, both the failure stress and Young's modulus of Tonalite increased with the increase of confining pressure at constant heating-temperature, and the failure stress decreased at 100$^{\circ}C$ but increased at 200$^{\circ}C$ under a constant confining pressure. In low temperature tests, the uniaxial compressive and tensile strengths and Young's modulus of these rocks increased as the cooling-temperature is reduced. Also, the uniaxial compressive and tensile strengths of wet rock specimens are less than those of dry rock specimens.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.695-699
• /
• 2010

추진제 KM10은 니트로셀룰로오스를 주원료로 제조된 단기추진제로서 장기저장 시자연분해현상을 일으키는 것으로 알려져 있다. 따라서 본 연구에서는 고온가속노화시험과 저장분석시험을 이용하여 추진제의 저장수명을 추정하였다. 고온가속 노화시험을 이용한 저장수명추정은 Arrhenius 식과 Berthelot 식을 사용하였으며, 저장분석시험을 이용한 저장수명 예측은 1차 회귀직선식을 이용하였다. 본 연구 결과에 따르면 고온가속 노화시험의 Arrhenius 식과 Berthelot식을 이용하여 추정한 추진제 KM10의 저장수명은 43.72년, 16.53년으로 큰 차이를 보였으며, 저장분석시험으로 이용한 저장수명은 42.94년으로 나타났다. 이것을 E. R. Bixon의 연구결과와 비교할 때 Arrhenius 식을 이용하여 추정한 값이 타당한 것으로 판단되었다.