• Journal of Radiation Protection and Research
• /
• v.45 no.3
• /
• pp.117-129
• /
• 2020

Background: Radiation portal monitors (RPMs) involving plastic scintillators installed at the border inspection sites can detect illicit trafficking of radioactive sources in cargo containers within seconds. However, RPMs may generate false alarms because of the naturally occurring radioactive materials. To manage these false alarms, we previously suggested an energy-weighted algorithm that emphasizes the Compton-edge area as an outstanding peak. This study intends to evaluate the identification of radioactive sources using an improved energy-weighted algorithm. Materials and Methods: The algorithm was modified by increasing the energy weighting factor, and different peak combinations of the energy-weighted spectra were tested for source identification. A commercialized RPM system was used to measure the energy-weighted spectra. The RPM comprised two large plastic scintillators with dimensions of 174 × 29 × 7 ㎤ facing each other at a distance of 4.6 m. In addition, the in-house-fabricated signal processing boards were connected to collect the signal converted into a spectrum. Further, the spectra from eight radioactive sources, including special nuclear materials (SNMs), which were set in motion using a linear motion system (LMS) and a cargo truck, were estimated to identify the source identification rate. Results and Discussion: Each energy-weighted spectrum exhibited a specific peak location, although high statistical fluctuation errors could be observed in the spectrum with the increasing source speed. In particular, ¹³⁷Cs and ⁶⁰Co in motion were identified completely (100%) at speeds of 5 and 10 km/hr. Further, SNMs, which trigger the RPM alarm, were identified approximately 80% of the time at both the aforementioned speeds. Conclusion: Using the modified energy-weighted algorithm, several characteristics of the energy weighted spectra could be observed when the used sources were in motion and when the geometric efficiency was low. In particular, the discrimination between ⁶⁰Co and ⁴⁰K, which triggers false alarms at the primary inspection sites, can be improved using the proposed algorithm.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.1-7
• /
• 2017

As the network environment develops and speeds up, a lot of smart devices is developed, and a high-speed smart society can be realized while allowing people to interact with objects. As the number of things Internet has surged, a wide range of new security risks and problems have emerged for devices, platforms and operating systems, communications, and connected systems. Due to the physical characteristics of IoT devices, they are smaller in size than conventional systems, and operate with low power, low cost, and relatively low specifications. Therefore, it is difficult to apply the existing security solution used in the existing system. In addition, IoT devices are connected to the network at all times, it is important to ensure that personal privacy exposure, such as eavesdropping, data tampering, privacy breach, information leakage, unauthorized access, Significant security issues can arise, including confidentiality and threats to facilities. In this paper, we investigate cases of security threats and cases of network of IoT, analyze vulnerabilities, and suggest ways to minimize property damage by Internet of things.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.91-101
• /
• 2013

The purpose of this study is to empirically verify the relationship between supply chain flexibility(process flexibility and logistics flexibility) and competitive advantage strategy(cost, quality, lead time). To accomplish these purposes, the relationships among supply chain flexibility(process, logistics), competitive advantage strategy(cost, quality, lead time) were modeled based on the studies conducted in the various areas. In order to collect the related data the questionaries of 500 were distributed to the employees working at the manufacturing industry in the area of Gumi. The collected data were analyzed with SPSS 18.0 for Windows. This study used the statistical techniques such as descriptive analysis, reliability analysis, factor analysis, correlation analysis, multi regression analysis. The results of the study show that process flexibility had positively significant effect on low cost strategy and high quality strategy and logistic flexibility have positively significant effect on delivery speed strategy. However, it was found that process flexibility did not have the significant effect on delivery speed strategy, and the logistic flexibility did not have the significant effect on low cost and high quality strategy. Thus, it is expected that each enterprise can maximize corporate strategies by applying different flexibility strategy depending on the competitive advantage strategy.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.35-40
• /
• 2022

In the agricultural environment, pesticide control requires a high risk of work and a high labor force for farmers. The effectiveness of pesticide control using unmanned aerial vehicles varies according to climate, land type, and characteristics of unmanned aerial vehicles. Therefore, an effective method for pesticide control by unmanned aerial vehicles considering the spraying conditions and environmental conditions is required. In this paper, we propose an efficient pesticide control system based on agricultural unmanned aerial vehicles considering the application conditions and environmental information for each crop. The effectiveness of the proposed model was demonstrated by measuring the drop uniformity of pesticides according to the change in altitude and speed after attaching the sensory paper and measuring the penetration rate of the drug inside the canopy according to the change in crop growth conditions. Experiment result, the closer the height of the UAV is to the ground, the more evenly the crops are sprayed, but for safety reasons, 2m more is suitable, and on average a speed of 2m/s is most suitable for control. The proposed control system is expected to help develop intelligent services based on the use of various unmanned aerial vehicles in agricultural environments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2017

In radio astronomy, high-capacity HDDs are being used to save huge amounts of HDDs in order to record the observational data. For VLBI observations, observational speeds increase and huge amounts of observational data must be stored as they expand to broadband. As the HDD is frequently used, the number of failures occurred, and then it takes a lot of time to recover it. In addition, if a failed HDD is continuously used, observational data loss occurs. And it costs a lot of money to buy a new HDD. In this study, we developed the integrity verification system of the Serial ATA HDD using FirmOS. The FirmOS is an OS that has been developed to function exclusively for specific purposes on a system having a general server board and CPU. The developed system performs the process of writing and reading specific patterns of data in a physical area of the SATA HDD based on a FirmOS. In addition, we introduced a method to investigate the integrity of HDD integrity by comparing it with the stored pattern data from the HDD controller. Using the developed system, it was easy to determine whether the disk pack used in VLBI observations has error or not, and it is very useful to improve the observation efficiency. This paper introduces the detail for the design, configuration, testing, etc. of the SATA HDD integrity verification system developed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.175-181
• /
• 2015

In this paper, we propose a design method for a digital filter using software in order to analyze the radio astronomy observation data. Recently the analysis method for radio astronomy observing system is transferring from hardware to software by developing of state-of-the-art of computer system. The existing hardware system is not able to easily change the specification because it is implemented to meet special requirements and it takes a high cost and time. In case of software, however, it has an advantage to implement with small cost if open software is used, and flexibly changes to satisfy the desired specification. But, in order to analyze the massive data like radio astronomy with software, the good performance system is needed for computer. Therefore, this paper proposes a digital filter design method using software with the same performance as that of digital filter implemented with hardware in observation system which is operated by the KVN(Korean VLBI Network). To design a digital filter, the proposed method is performed with standard C language and the simulation is conducted with GNU(GNU's Not Unix) Octave and investigated to show its effectiveness. In addition, for the high speed operation of the designed digital filter, the SSE(Streaming SIMD Extensions) library is adopted for available parallel operation. By the proposed digital filter, the digital filtering is performed for the wide band observation data in the KVN observation mode, the filtering result of narrow band observation has no ripple inside of stop band, and confirmed the effectiveness of the proposed method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.172-177
• /
• 2023

In this paper, 2-dimensional backtracking method for ultrasonic signals. Ultrasonic sensors are a common technology used in industrial fields as many studies have been conducted on distance measurement and indoor location tracking using transmission and reception devices in pairs. A method for tracking a signal of an arbitrary ultrasonic transmission device on a 2D plane using only a receiver of an ultrasonic signal is proposed. In order to track the ultrasonic signal, the receiver receives the signal by making at least three. The three receivers may calculate a direction and a distance using a time difference in which the ultrasound reception sound is reached. The existing method of tracking signal sources using ultrasonic waves has a problem of time synchronization of devices because the transceivers must be paired or installed independently for each sensor. In order to solve this problem, the distance of the ultrasonic receiver is minimized, and it is configured as one device. The sensor installed as one device may be processed by one operator, thereby solving the time synchronization problem. To increase time difference accuracy, high-speed 32-bit timers with high time resolution can be used to quickly calculate and track distances and directions.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.25-49
• /
• 2009

Advances in technology have resulted in the emergence of new information systems. The convergence of IT and manufacturing sectors has blurred the boundaries among industries. Also, such convergence has become established as a paradigm to build a new area. Especially the convergence of broadcasting and telecommunication, notably in the case of IPTV (Internet Protocol Television), is among the most salient examples of its kind in recent years as a major case of disruptive technology innovation. Despite its much fanfare, such convergence, however, has not fulfilled the expectation; it has not produced positive economic effects while negatively affecting the growth of IPIV. Stakeholders in and around IPIV including telecommunication companies, broadcasting corporations, and government bodies wish to gain control of IPTV under their wings. IPTV has drifted in the midst of conflicts among the stakeholders in and around IPTV, particularly telecommunication and broadcasting organizations in a broad sense. Our empirical research intends to deal with how audiences accept IPTV and how firms provide IPTV services to utilize their resources. Three research questions in this paper include, first, whether Technology Acceptance Model (TAM) can sufficiently explain the acceptance of IPTV as an information system. The second question concerns with empirically testing the playful aspect of IPTV to increase its audience acceptance. Last, but not least, this paper deals with how firms can efficiently and effectively allocate their limited resources to increase IPTV viewers. To answer those three main questions of our study, we collect data from 197 current subscribers of high speed internet service and/or cable/satellite television. Empirical results show that 'perceived usefulness (PU) $\rightarrow$ Intention to use' and 'perceived ease of use (PEU) $\rightarrow$ Intention to use' are significant. Also, 'perceived ease of use' is significantly related to 'perceived usefulness.' Perceived ease of handling IPTV without much effort can positively influence the perceived value of IPTV. In this regard, engineers and designers of IPTV should pay more attention to the user-friendly interface of IPTV. In addition, 'perceived playfulness (PP)' of IPTV is positively related to 'intention to use'. Flow, fun and entertainment have recently gained greater attention in the research concerned with information systems. Such attention is due to the changing features of information systems in recent years that combine the functional and leisure attributes. These results give practical implications to the design of IPTV that reflects not just leisure but also functional elements. This paper also investigates the relationship between 'perceived ease of use (PEU)' and 'perceived playfulness (PP).' PEU is positively related to pp. Audiences without fear can be attracted more easily to the user-friendly IPTV, thereby perceiving the fun and entertainment with ease. Practical implications from this finding are that, to attract more interest and involvement from the audience, IPTV needs to be designed with similar or even more user friendly interface. Of the factors related to 'intention to use', 'perceived usefulness (PU)' and 'perceived ease of use (PEU)' have greater impacts than 'perceived playfulness (PP).' Between PU and PEU, their impacts on 'intention to use' are not significantly different statistically. Managerial implications of this finding are that firms in preparation for the launch of IPTV service should prioritize the functions and interface of IPTV. This empirical paper also provides further insight into the ways in which firms can strategically allocate their limited resources so as to appeal to viewers, both current and potential, of IPTV.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.11
• /
• pp.509-516
• /
• 2008

The Minimum Letter Flips (MLF) model and the Weighted Minimum Letter Flips (WMLF) model are for solving the haplotype assembly problem. But these two models are effective only when the error rate in SNP fragments is low. In this paper, we first establish a new computational model that employs the related genotype information as an improvement of the WMLF model and show its NP-hardness, and then propose an efficient genetic algorithm to solve the haplotype assembly problem. The results of experiments on random data set and a real data set indicate that the introduction of genotype information to the WMLF model is quite effective in improving the reconstruction rate especially when the error rate in SNP fragments is high. And the results also show that genotype information increases the convergence speed of the genetic algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.801-809
• /
• 2007

LDPC Low Density Parity Check) code, which is an error correcting code determined to be applied to the 4th generation mobile communication systems, requires a heavy computational complexity due to iterative decodings to achieve a high BER performance. This paper proposes an algorithm to reduce the number of decoding iterations to increase performance of the decoder in decoding latency and power consumption. Measuring changes between the current decoded LLR values and previous ones, the proposed algorithm predicts directions of the value changes. Based on the prediction, the algorithm inverts the sign bits of the LLR values to speed up convergence, which means parity check equation is satisfied. Simulation results show that the number of iterations has been reduced by about 33% without BER performance degradation in the proposed decoder, and the power consumption has also been decreased in proportional to the amount of the reduced decoding iterations.