• Journal of Korean Home Economics Education Association
• /
• v.22 no.1
• /
• pp.137-148
• /
• 2010

The usage status of trousers as school uniform for girl's middle and high school students in Seoul and the perception on trousers as school uniform were analyzed. Students who wore 'skirts only' were the greatest and students who wore 'trousers only' were higher in the case of winter uniform than in summer uniform. The most popular reason to wear skirts was 'because most of their fellow students wore skirts' in both winter and summer. The main reason for wearing trousers was 'because it was easy to cope with changes in temperature' in winter and 'because it allowed more comfortable movements' in summer. Students who wore trousers were generally satisfied with wearing trousers as school uniforms. However, they showed a low degree of satisfaction about design and color of trousers. The students preferred slim and straight trousers, and black col or with beige and blue being the next color. Students in general had low level of recognition for the need to wear trousers. Students perceived trousers as being cold-proof and comfortable for physical activities. But they also perceived that trousers were not suitable for improving their appearances and expressing their characteristics. Especially, the students who wore trousers tended to think that trousers reduced their cares for their personal attire and that trousers were good for wearing after school, but the students who did not wear trousers were found to think contrary.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.445-452
• /
• 2009

This study aims to improve the fit of high school girls' uniforms. This study researched on the fit of the recent high school girls' uniforms and developed a sizing system that adequately reflects their body figures. The results are as follows. First, the research showed that over 50% of the highschool girls wore their blouses too tight, whereas over 60% of the girls wore skirts that were appropriately fitted. Second, to classify the high school girls' figures, factor analysis and cluster analysis were conducted. 5 factors were extracted for upper body and 3 factors for the lower body. The girls were then divided into 3 groups for the upper body and 4 groups for the lower body. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution slightly overlapped. Fourth, sizing system considering body type distribution and high frequency distribution section of sizes was suggested. As a result, for the upper body, when 6 sizes were suggested, 43.9% of the population was covered and when 11 sizes were suggested, 58.3% was covered. For the lower body, when 6 sizes were suggested, 32.2% was covered, and when 11 sizes were suggested 58.9% of the population was covered.

• Journal of the Korean Institute of Educational Facilities
• /
• v.28 no.6
• /
• pp.3-12
• /
• 2021

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.103-114
• /
• 2007

The purpose of this study is to satisfy students in adolescent trends of school uniforms and to provide them with useful material with matching current fashions by analyzing the attitude of students toward uniform transformation in female highschool students and investigating factors influencing on behaviors of uniform transformation. The subjects of this study are 30 students in Daegu with the basic ways of investigating such as depth interview and survey. The results are as follows; First, students agree to wearing school uniforms. As the main reason for wearing school uniforms, students put emphasis on peer pressure. It is also analyzed that the figure of students' body have some influence on the attitude of students toward wearing uniform while students' appearance have no influence on the attitude of students toward wearing uniform. Second, students showed high satisfaction in school uniforms. While students are satisfied with design and color of school uniform, they are not satisfied with practicality, economic efficiency and the quality of textile. Third, the study shows most students have experience of uniform transformation as a result of depth interview about actual condition of uniform transformation. Whereas students usually wear the jacket with its width and length shortened, they tend to lengthen skirt and unstitch pleat of skirt. Fourth, there are many reasons for uniform transformation as a result of depth interview with students. Transformation for satisfying aesthetic desire tops the list, followed by transformation for matching, transformation for peer pressure. As shown by the results above, every school needs to make various efforts to satisfy students, teachers and parents by considering and using students' opinion in order to choose the better school uniforms. In addition, the study related to school uniform transformation need to have more various investigating ways to acquire more authentic results such as expanding the subjects to not only students but also teachers and parents and in-depth comparison between subjects.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.2
• /
• pp.69-78
• /
• 2018

In current research, it was attempted a preliminary design and evaluation of non-uniform ultra high-strength concrete (UHSC) truss members. UHSC used here has the compressive strength of 180 MPa, the tensile strength of 8 to 20 MPa, and the tensile strain after cracks up to 2%. By the three-dimensional finite element stress analysis as well as strut-tie approach on concrete solid beams, the non-uniform truss shape of UHSC truss was designed with the architectural esthetic concept. In a series of examples, to compare with conventional concrete members, the proposed UHSC truss members have advantages in capabilities of the slender design with minimum weight with high performances under transverse loadings as well as the aesthetically non-uniform design for spatial structures.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.954-960
• /
• 2014

This study surveyed high school girls in the Busan, Ulsan, and Gyeongnam areas to study how they wear school uniforms along with their satisfaction levels and demands in regards to functional school uniforms. This study presents data on the requirements for the development of winter school uniforms for high school girls with improved warmth functions. The findings are: First, high school girls purchased school uniforms of different brands and the purchase rates for three brands were 25% to 30% approximately. Most of them spent more than 300,000 KRW and less than 400,000 KRW on school uniforms purchases. Second, the greatest complaints by students about winter school uniforms were the ability to conduct routine activities and poor thermal insulation. The most popular bottom underwear for girls was underpants and leggings. The most popular top underwear was half-sleeved round neck t-shirts and running shirts. Third, a survey about uniform functionality showed that most students used and 'arm pit sweat absorbing pad', 'Waist size adjusting function, and 'inside pockets with zippers'. Satisfaction with functional uniforms was low: less than 3.5 in all questions. Fourth, students were favorable to develop functional uniforms to keep warm in the winter. The bottom needs to be warmer than the top and it is necessary to keep legs warm, especially the thighs and calves.

• Steel and Composite Structures
• /
• v.48 no.2
• /
• pp.235-250
• /
• 2023

The present paper examines the stability analysis of the buckling differentiae of the small-scale, non-uniform porosity-dependent functionally graded (PD-FG) tube. The high-order beam theory and nonlocal strain gradient theory are operated for the mathematical modeling of nanotubes based on the Hamilton principle. In this paper, the external radius function is non-uniform. In contrast, the internal radius is uniform, and the cross-section changes along the tube length due to these radius functions based on the four types of useful mathematical functions. The PD-FG material distributions are varied in the radial direction and made with ceramics and metals. The governing partial differential equations (PDEs) and associated boundary conditions are solved via a numerical method for different boundary conditions. The received outcomes concerning different presented parameters are valuable to the design and production of small-scale devices and intelligent structures.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2003

Barrier ribs for PDP(plasma display panel) are commonly utilized to have uniform height and width and to prevent opical crosstalk between adjacent cells. The requirements for such barrier ribs are uniform height and shape, low outgassing rate and low porosity, high aspect ratio, and fine resolution. In this study, we are studied about that to make efficiency of material and high quality barrier ribs for PDP. As a result, could got high barrier ribs of $140{\mu}m$ evenly in 1th phenomenon using watersoluble UV curing resin and know that flatness of upper part is also very good.

• Journal of Korean Home Economics Education Association
• /
• v.26 no.2
• /
• pp.1-14
• /
• 2014

School uniform recycling has gained increasing attention as one of the solutions for environmental problems and improvement of home economics. The aim of this study is to investigate the effect of environment-friendly consumption consciousness, consumption behavior, and consumption value on attitude of school uniform recycling in adolescents. Using self-completion questionnaire, environment-friendly consumption consciousness, consumption behavior, and consumption value were examined in 426 middle- and high school female students in Seoul and Gyeonggi province. The results are as follows; first, although more than 60% students showed positive attitude for purchasing recycled school uniform, respondents have rarely been purchasing recycled school uniform. Second, environment-friendly consumption consciousness, consumption behavior, and consumption value of students had the significant effect on the attitude of school uniform recycling. Our results suggest that more efforts should be focused on the education of environment-friendly consumption consciousness and consumption behavior.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.897-902
• /
• 2015

This study reports on a uniform resin coating method by using a doctor blade type dispenser. For high productivity, continuous imprint-lithography has been studied, and developed fabrication systems are used in several applications such as anti-reflection films, dry adhesives, and water collecting surfaces. In the continuous fabrication field, researchers have typically focused on patterning and demolding procedures. During the roll-to-roll fabrication process, however, the uniform resin coating process is also important in order to obtain a high quality product, which can be evaluated by uniform thickness, precise geometric expressions, and a thin residual layer. To achieve these, a doctor blade type dispenser was designed and fabricated. As a result, thickness of coated resin was well controlled by modulating the flow rate of the resin and blading gap. In addition, a very thin layer coating process (${\sim}10{\mu}m$) was achieved by softly contacting the blade on the substrate.