• ETRI Journal
• /
• 제27권5호
• /
• pp.551-556
• /
• 2005

We have demonstrated a high-power widely tunable sampled grating distributed Bragg reflector (SGDBR) laser integrated monolithically with a semiconductor optical amplifier (SOA) having a lateral tapered waveguide, which is the first to emit a fiber-coupled output power of more than 10 dBm using a planar buried heterostructure (PBH). The output facet reflectivity of the integrated SOA using a lateral tapered waveguide and two-layer AR coating of $TiO_2\;and\;SiO_2$ was lower than $3\;{\times}\;10^{-4}\;over$ a wide bandwidth of 85 nm. The spectra of 40 channels spaced by 50 GHz within the tuning range of 33 nm were obtained by a precise control of SG and phase control currents. A side-mode suppression ratio of more than 35 dB was obtained in the whole tuning range. Fiber-coupled output power of more than 11 dBm and an output power variation of less than 1 dB were obtained for the whole tuning range.

• Journal of Nutrition and Health
• /
• 제21권4호
• /
• pp.213-222
• /
• 1988

The purpose of this study was to investigate physical condition, physical fitness, sociodemographic factors, biochemical factors and personality factors of 5th grade students of elementary school. The number of students surveyed was 760 from each school of urban, middle and rural areas. All data analysis was done by BMI group which is based on previous study. 1) The children whose parents were on low education level and mother had a job had lower BMI values than others. Nine percent of male and 21% of female subjects skipped breakfast almost everyday. The 21.7% of all subjects regularly took nutritive pills, which had no difference in various BMI groups. 2) The physical condition of children had a high correlation with that of parents. 3) The physical fitness in BMI 5 groups was weaker than other groups, especially in male. 4) The contents of blood hemoglobin, cholesterol and glucose and hematocrit value were estimated. In female, the values of hemoglobin content and hematocrit had significant difference between BMI groups, but there are no trends. 5) The impulsiveness of male was the highest in BMI 1 group and the lowest in BMI 5 group among 5 groups. Besides, general activity, reflectivity and sociality in BMI 5 group had a low level. In female, personality factors except sociality didn't show any considerable difference.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.25-27
• /
• 2017

Nanoscale textured black silicon has attracted intensive attention due to its great potential as applications in multicrystalline silicon-based solar cells. It absorbs sunlight over a broad range of wavelengths but introduces large recombination centers, non-uniform doping into cell. In this study, we present a metal-assisted chemical etching technique plus alkaline etching process to fabricate nanoscale pyramid structures with optimized condition. To make the structures, silver nanoparticles-loaded mc-Si wafer was submerged into $H_2O_2/HF$ solution first for nanohole texturing the wafer and textured wafer etched again with KOH solution for making nanoscale pyramid structures. The average reflectivity (350-1050 nm) is about 8.42% with anti-reflection coating.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.238-244
• /
• 2008

A numerical and experimental studies are carried out to investigate the heat transfer characteristics of 5kWth dish-type solar air receiver. Measured solar radiation and temperatures at several different locations are used as boundary conditions for numerical simulation. Many parameters' effects (reflectivity of the reflector, the thermal conductivity of the receiver body, transmissivity of the quartz window, etc.) on the thermal performance are investigated. Discrete Transfer Method is used to calculate the radiation heat exchange in the receiver. A heat transfer model is developed and the rate of radiation, convection and conduction heat transfer are calculated. Using the numerical model, the heat transfer characteristics of volumetric air receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• 한국광학회지
• /
• 제13권3호
• /
• pp.209-214
• /
• 2002

기판의 표면거칠기가 반사경의 산란에 미치는 영향을 조사하였다. 기판의 표면거칠기가 다른 다섯 종류의 기판에 이온빔 스퍼터링 방법과 전자총 증착 방법으로 각각 반사율이 1에 가까운 고반사율 박막을 증착하고 산란을 TIS 방법으로 측정하였다. 기판의 표면거칠기가 2$\AA$ 이상인 경우의 기판의 산란에 대한 반사경 산란 비율은 표면거칠기가 2$\AA$ 미만인 경우의 산란 비율에 비하여 급격한 증가를 나타냄을 알 수 있었으며, 기판의 표면거칠기가 낮은 경우 반사경의 산란은 기판의 표면거칠기보다 반사경을 구성하는 박막의 미세구조에 의존하는 것으로 판단되었다. 한편 반사경 중에서 가장 작은 산란은 2.1 ppm이었고, 이것은 표면거칠기 0.23$\AA$인 기판에 이온빔 스퍼터링 방법으로 제작되었다.

• 한국광학회지
• /
• 제19권2호
• /
• pp.144-149
• /
• 2008

대구경 레이저 광집속장치의 쿠데(Coude) 광경로를 구성하는 레이저 반사경들의 레이저 빔조사에 의한 열변형과 이에 따른 광파면 왜곡에 대한 연구를 수행하였다. 쿠데 광경로는 연결거울 3개와 고속조종거울 1개로 구성된다. 반사경은 레이저 빔 파장에 대하여 99.5%의 반사율을 갖으며, 반사경 거울면에 조사된 레이저 에너지는 초당 500 W 정도가 흡수된다. 레이저 빔을 5초 동안 조사하면서 유발된 열하중에 의한 거울의 열 변형과 이에 따른 광파면 왜곡을 분석하였다. 광파면 왜곡은 연결거울의 경우 334 nm_PV, 98 nm rms로 나타났으며 고속조종거울은 $11.5\;{\mu}m$_PV, $3\;{\mu}m$ rms로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.32-35
• /
• 2011

Top-emission device has a merit of high aperture ratio and narrow emission spectrum compared to that of bottom-emission one. Emission spectra of top-emission organic light-emitting diodes depending on a layer thickness and view angle were analyzed using a theory of microcavity. Device structure was manufactured to be Al (100 nm)/TPD/$Alq_3$/LiF (0.5 nm)/Al (2 nm)/Ag (30 nm). N,N'-diphenyl-N,N'- di (m-tolyl)-benzidine (TPD) and tris (8-hydroxyquinoline) aluminium (Alq3) were used as a hole-transport layer and emission layer, respectively. And a thickness of TPD and Alq3 layer was varied in a range of 40 nm~70 nm and 60 nm~110 nm, respectively. Angle-dependent emission spectrum out of the device was measured with a device fixed on a rotating plate. Since the top-emission device has a property of microcavity, it was observed that the emission spectrum shift to a longer wavelength region as the organic layer thickness increases, and to a shorter wavelength region as the view angle increases. Layer thickness and view-angle dependent emission spectra of the device were analyzed in terms of microcavity theory. A reflectivity of semitransparent cathode and optical path length were deduced.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.628-631
• /
• 2008

원격탐지를 목적으로 하는 레이다 시스템에서는 일반적으로 도플러 필터뱅크를 적용하여 목표물 반사 신호들의 스펙트럼을 분석함으로서 반사 신호의 크기 및 속도정보 등을 얻게 된다. 이러한 스펙트럼 추정방법은 오래 전부터 널리 이용되고 있는 FFT(Fast Fourier Transform) 기법을 이용한 것으로 대부분의 레이다 시스템에서 채택하고 있는 방식이다. 그러나 레이다 시스템에서의 목표물 반사 신호 획득시간이 현저히 짧은 경우, 즉 고속으로 이동하는 항공기용 시스템이나 매우 빠른 목표물들의 즉각적인 탐지가 목적인 시스템에서는 기존 FFT 스펙트럼 추정방식으로는 높은 도플러 주파수 해상도를 얻을 수 없기 때문에 정확도가 현저히 떨어질 수 있다. 따라서 본 논문에서는 이러한 문제점을 극복하기 위하여 해상도 문제가 발생하지 않는 파라메터 추정방식인 AR 스펙트럼 추정 방법에 대하여 고찰하였다.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.99-106
• /
• 2017

Purpose: Most modern office buildings adopt the curtain wall system in order to provide occupants with the sense of openness and high-technology, which requires large window area. As a result, the amount of solar radiation increases, negatively affecting cooling load during the summer and increasing energy costs. However, the performance of window itself is not sufficiently controllable parameter to control thermal comfort and solar radiation. Therefore, a shading device such as venetian blind is required to control them and thus a variety of studies have been performed thus far. So, the purpose of this study is to improve the performance of blind through the development of blind control algorithm. Method: Among various input variables for the control of venetian blinds, the vertical solar radiation has been selected in this study as the primary input variable and the optimal control algorithm for venetian blinds were developed for each window orientation. Result: The developed optimal control algorithm has a positive effect on building energy savings.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.455-460
• /
• 2016

A textured front surface is required in high efficiency silicon solar cells to reduce reflectance and to improve light trapping. Wet etching with alkaline solution is usually applied for mono crystalline silicon solar cells. However, alkali texturing method is not appropriate for multi-crystalline silicon wafers due to grain boundary of random crystallographic orientation. Accordingly, acid texturing method is generally used for multi-crystalline silicon wafers to reduce the surface reflectance. To reduce reflectivity of multi-crystalline silicon wafers, double texturing method with combination of acid and reactive ion etching is an attractive technical solution. In this paper, we have studied to optimize RIE condition by different RF power condition (100, 150, 200, 250, 300 W).