• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.4
• /
• pp.191-196
• /
• 2003

For improvement of the wear performance of Ti alloy, vacuum-carburizing technique was tried for the first time using propane atmosphere. During the low pressure carburizing carbide was formed at the surface and carbon transfer was occurred from the carbide to the matrix. It was found that: (i) surface hardness increased with the reduction of operating pressure and time; (ii) optimum hardness distribution could be obtained with the proper choice of temperature and carbon flux control; and, (iii) case depth was largely influenced not by time but by temperature. The two steps process was recommended for obtaining thick case depth and high surface hardness of Ti alloy. For the low oxygen partial pressure, it was necessary to introduce additional CO gas to the atmosphere.Grain boundary oxidation and non-uniformity could be prevented.

• Food Science of Animal Resources
• /
• v.36 no.2
• /
• pp.283-288
• /
• 2016

The objective of this study was to investigate the microbial count of duck meat and duck meat products commercially available in Korea. High hydrostatic pressure (HHP) treatment was applied at 0.1, 300, 400, and 500 MPa for 5 min to enhance the microbiological safety of duck meats. The levels of total aerobic bacteria were in the ranges of 3.53-6.19 and 3.62-6.85 Log CFU/g in raw and smoked duck products, respectively. By DNA sequence analysis, we identified microorganisms responsible for spoilage, with the most common species in the raw and smoked duck products being Aeromonas spp. or Pseudomonas spp. and Leuconostoc mesenteroides, respectively. HHP treatment significantly reduced the levels of total aerobic bacteria in raw and smoked duck products. This study demonstrates that HHP treatment may be used to effectively improve the safety of raw and smoked duck meat products.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.3
• /
• pp.13-20
• /
• 1990

SCM 21 and D.P steel were carburized in vacuum using prophane at a temperature ranging from 1228k to 1308k under a gas pressure ranging from 21.3kpa to 61.8kpa, and the following results were obrained. 1) D.P. steel has considerable efficiency in depressing the grain growth during the high temperature carburizing and it has fine structure even at 1268k for 14.4ks when carburizied. Therefore this steel is expected to be suitable for vacuum carburizing at a high temperature. 2) Case depth was increased as the carburizing temperature increases and it was 3.2mm at max, temperature of 1308k, for max, time of 14.4ks and under max, pressure of 61.8kpa. Thus vacuum-carburizing was considered effective for the materials which need case depth, which is necessary for machine structure use. 3) The rate of case depth of SCM 21 was faster than D.P. steel under same carburizing conditions and the increasing rate of the case depth was constant. 4) Case depth was increased as the gas pressure becomes high under same carburizing temperature. 5) Case carbon concentration, $C_s$, of SCM 21 obeys to a formula, $$C_s=kt^{1/2}+C_0$$ Where k is $2.15{\times}10^{-2}$($wt%.S^{-1/2}$) and this value is a little bit lower than that of SNCM 815.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.216-222
• /
• 2017

Synthesized monocrystalline nanodiamond (nD) particles are heat-treated at various temperatures to produce highly structured diamond crystals. The heat-treated nDs show different weight loss ratios during thermogravimetric analysis. The crystallinities of the heat-treated nDs are analyzed using Raman spectroscopy. The average particle sizes of the heat-treated nDs are measured by a dynamic light scattering (DLS) system and direct imaging observation methods. Moreover, individual dispersion behaviors of the heat-treated nD particles are investigated based on ultrasonic dispersion methods. The average particle sizes of the dispersed nDs according to the two different measurement methods show very similar size distributions. Thus, it is possible to produce highly crystallized nD powder particles by a heat-treatment process, and the nD particles are relatively easy to disperse individually without any dispersant. The heat-treated nDs can lead to potential applications such as in nanocomposites, quantum dots, and biomedical materials.

• The Journal of Internal Korean Medicine
• /
• v.41 no.2
• /
• pp.111-121
• /
• 2020

Objectives: In 2019, we conducted a 12-week public health promotion program on the use of Korean medical treatments for elderly people who are at potential risk for stroke. A significant improvement effect was obtained through the program. The objective of this study was to report the results of this public health promotion program. Methods: Fifty people participated in the program. The participants were received herbal medicine and acupuncture treatments for stroke prevention for 12 weeks. Systolic blood pressure, diastolic blood pressure, blood sugar, weight, and body fat were evaluated twice. A questionnaire was used to assess the European Quality of Life-5 Dimensions (EQ-5D) score, the stroke danger signs, the recognition of stroke signs, and treatment satisfaction. Results: During the 12-week Korean medical treatment program, systolic blood pressure was significantly decreased by 119.40±19.32 mmHg, diastolic blood pressure was decreased by 79.80±8.92 mmHg, and weight was decreased by 58.24±9.70 Kg. The EQ-5D score was increased by 13.82±1.2 and the stroke danger signs score was increased by 26.76±3.59. Sex and EQ-5D score, stroke danger signs score, weight, and body fat were correlated. Age and weight were correlated. Conclusions: For elderly people with the potential risk for stroke, the 12-week Korean medical treatment program was effective and their satisfaction with the treatment was high. This study has significance because this is an unusual report in Korea on the effect of a Korean medical treatment program for stroke using a Korean medicine public health promotion.

• Journal of Haehwa Medicine
• /
• v.16 no.2
• /
• pp.199-210
• /
• 2007

Objective & Methods : The case report is to observe 27 case of venesection with negative pressure therapy(buhang) operated at CV17 (Danjuong) on sudden palpitation. We carried out to analyze the distribution and Martin's evaluation and weighted scale by sex & age, patient conditional grade, accompanied symptoms, duration, number of treatments as well. Results : 1. Forties is significantly distributed on sudden palpitation. 2. Depression instance out of many accompanied symptoms is significantly distributed. 3. Mean of operant frequency is significantly resulted on 10 or 11 times. 4. The improvement on the weighted scale is over one grade. 5. Younger is high on the assessment of treatment on Martin's evaluation and weighted scale by age, while older is low. 6. Lesser one year and more three years is some significantly resulted on the assessment of treatment on Martin's evaluation and weighted scale by duration. 7. Pleurodynia, insomnia, distress in the stomach are effective more 90%, and depression, asthma are more 80% on the assessment of treatment on Martin's evaluation by accompanied symptoms, while asthma and pleurodynia are very significantly resulted on the assessment of treatment on weighted scale. 8. The assessment of treatment on Martin's evaluation and weighted scale have no connection with operant frequency. Conclusion : These results suggest that venesection with negative pressure therapy(buhang) operated at CV17 (Danjuong) has a therapeutic effect on on sudden palpitation.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.71-80
• /
• 2023

Silver paste is a valuable electrode material for electronic device applications because it is easy to handle with relatively low heat treatment. This study treated the electrode surface using an atmospheric-pressure plasma jet on the silver-paste electrode. This plasma jet was generated in an argon atmosphere using a high voltage of 5.5 to 6.5 kV with an operating frequency of 11.5 kHz. Plasma-jet may be more beneficial to the printing process by performing it at atmospheric pressure. The electrode surface becomes hydrophilic quickly and contact angle variation is observed on the electrode surface as a function of plasma treatment time, applied voltage, and gas flow rate. Also, there was no deviation in the contact angle after the plasma treatment in the large-area sample, that means a uniform result could be obtained regardless of the substrate size. The outcomes of this study are expected to be very useful in forming a stacked structure in the manufacture of large-area electronic devices and future applications.

• Biomolecules & Therapeutics
• /
• v.7 no.4
• /
• pp.322-328
• /
• 1999

In this study, it was tested whether the changes of catecholamines and its metabolites are related with the changes of blood pressure(BP) induced by different levels of lead exposure. Adult male SD rats were exposed to lead by giving drinking water containing 50(low doses), 200 and 1,000 ppm(high doses) of lead(as lead acetate) or sodium acetate(for control groups, supplying an identical amount of acetate) for 7 or 16 weeks. The systolic BP was measured in the unanesthetized state by the tail-cuff technique. Levels of catecholamines and its metabolites in urine were measured by HPLC-ECD. Rats receiving 200 and 1,000 ppm developed an elevation of systolic BP at 3 and 7 weeks compared with week 0, but blood pressure levels at 16 weeks returned to normal. For the 50 ppm lead treated group, systolic BP increased significantly at 7 weeks and 16 weeks. The concentrations of norepinephrine and VMA in the urine of lead exposed rats changed similarly to the changes of blood pressure, but blood viscosity levels in all lead treated rats increased continuously during all lead treatment periods. This result suggests that the changes of catecholamines and its metabolites in urine by lead intoxication may influence the changes of blood pressure.

• Korean Journal of Food Science and Technology
• /
• v.46 no.4
• /
• pp.404-409
• /
• 2014

In this study, the effects of high-pressure homogenizer treatment on the physicochemical properties of wheat bran from different areas were evaluated. The results showed that the high-pressure homogenizer process could effectively decrease particle size and loosen the microstructure of the wheat bran matrix. As the particle size decreased, the bulk density of wheat bran was significantly decreased (p<0.05) and the water-holding capacity, swelling capacity, oil-holding capacity, and cation-exchange capacity were substantially increased. In addition, microscopic analysis revealed the gradual disintegration of the original cell wall structure and the dissociation of bran tissues over the course of high-pressure homogenization treatment. Scanning electron micrographs showed that the process could also effectively separate out the structural components of wheat bran. These results suggest that the high-pressure homogenizer process is an effective method to modify the physicochemical properties of wheat bran and likely other cereal brans, which might provide potential fiber-rich ingredients for use in functional foods.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.596-601
• /
• 1998

Effects of high hydrostatic pressure on microorganisms, pectin enzymes and texture of dongchimi (pickled radish roots) were investigated. Dongchimi was pressurized at $200{\sim}686\;MPa$ for 5 min when its pH reached to 4.0. Total aerobes, initial concentration of $4.05{\times}10^8\;CFU/mL$, were completely inactivated by high hydrostatic pressure at 600 MPa. Lactic acid bacteria, yeasts and molds, initial concentration of $3.25{\times}10^8\;CFU/mL\;and\;3.55{\times}10^4\;CFU/mL$, respectively, were completely inactivated by high hydrostatic pressure at 400 MPa. Leuconostoc mesenteroides appeared to be the most barotolerant lactic acid bacteria because it was the sole bacteria survived at 380 MPa. Pectinesterase (PE) and polygalacturonase (PG) activities increased after high hydrostatic pressure treatment. Residual PE activity was 193 after pressurization at 500 MPa, and residual PG activity was 191 after pressurization at 686 MPa when the initial enzyme activity of control was set to 100. The hardness of pressurized dongchimi was higher than control.