• 제목/요약/키워드: High Power Filter

검색결과 871건 처리시간 0.023초

고 전력 RF-Filter의 수동혼변조 저감방안에 대한 연구 (Study on Passive Intermodulation Reduction for High Power RF-Filter)

  • 박종철;이강훈;이영철
    • 한국전자통신학회논문지
    • /
    • 제3권4호
    • /
    • pp.282-288
    • /
    • 2008
  • 본 연구에서는 고출력 RF 필터의 도금상태에 따른 수동혼변조왜곡(PIMD)을 측정하였으며 RF-filter의 PIMD를 저감시키기 위한 방안을 제시하였다. PIMD의 표준측정방안에 따라 Wibro 중계기용 고출력 RF-필터의 PIMD 특성를 측정하였다. Wibro용 고 전력-RF 필터의 설계에서 통과대역의 에지(edge)에서 삽입손실 및 지연 특성의 평탄도가 저하될 경우, PIMD의 발생되므로 본 연구에서는 고 전력 필터의 PIM을 감소시키기 위하여 필터의 내부 도금 재료의 종류와 방안을 제시하였다.

  • PDF

전력선 통신 시스템을 위한 고성능 Notch Filter 알고리즘 구현 (Implementation of a High Performance Notch Filter Algorithm for Power Line Communication System)

  • 남윤호;장동원;김경석
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.159-166
    • /
    • 2010
  • 전력선은 이미 전 세계적으로 60% 이상의 주거지에 설치되어 있기 때문에 고속의 전력선 통신을 이용하여 인터넷 액세스를 실현하는 새로운 액세스용 회선을 부설하지 않고 광대역 서비스를 제공할 수 있다. 이러한 이유로 정보화 시대에 인터넷 망이 닿지 않는 Last Mile Solution에 가장 적합한 서비스로서 전력선 통신에 대한 연구가 이루어지고 있다. 하지만, 전력선은 통신 선로가 아니고 전력을 전송하도록 설계되었기 때문에 전자파의 누설로 부근의 무선통신 시스템에 영향을 주게 된다. 본 논문에서는 기존의 무선 통신 서비스와 전력선 통신과의 간섭을 줄이기 위하여 기존의 Notch Filter보다 성능 면에서 우수한 고성능 Notch Filter 알고리즘을 제안하였다. 또한, 고성능 Notch Filter를 적용하여 임베디드 보드를 통한 Notch Filter Emulator를 구현하였다.

하모닉 제거용 고전력 스위치 필터뱅크 설계 (Design of High-Power Switched Filter Bank for Harmonic Suppression)

  • 이병남;박동철
    • 한국군사과학기술학회지
    • /
    • 제11권3호
    • /
    • pp.146-153
    • /
    • 2008
  • High-power communication jammer has to include the switched filter bank to eliminate the harmonic signals generated by amplifier. Generally, the switched filter bank consists of in-out switches and several filters. This paper describes the design of high-power switched filter bank, particularly the high-power filter bank operating over 20$\sim$110MHz frequency range. The filters designed have insertion loss less than 0.3dB, VSWR less than 1.25:1, and harmonic suppression more than 35dB. Also, the switched filter bank can endure upto 2kW high-power signal with very low harmonic level within $30{\mu}s$ switching speed.

저전력 NAND 플래시 메모리를 위한 필터 버퍼의 효율성 분석 (Analysis on the Effectiveness of the Filter Buffer for Low Power NAND Flash Memory)

  • 정보성;이정훈
    • 대한임베디드공학회논문지
    • /
    • 제7권4호
    • /
    • pp.201-207
    • /
    • 2012
  • Currently, NAND Flash memory has been widely used in consumer storage devices due to its non-volatility, stability, economical feasibility, low power usage, durability, and high density. However, a high capacity of NAND flash memory causes the high power consumption and the low performance. In the convention memory research, a hierarchical filter mechanism can archive an effective performance improvement in terms of the power consumption. In order to attain the best filter structure for NAND flash memory, we selected a direct-mapped filter, a victim filter, a fully associative filter and a 4-way set associative filter for comparison in the performance analysis. According to the results of the simulation, the fully associative filter buffer with a 128byte fetching size can obtain the bet performance compared to another filter structures, and it can reduce the energy*delay product(EDP) by about 93% compared to the conventional NAND Flash memory.

An Improved Multi-Tuned Filter for High Power Photovoltaic Grid-Connected Converters Based on Digital Control

  • Sun, Guangyu;Li, Yongli;Jin, Wei
    • Journal of Power Electronics
    • /
    • 제18권1호
    • /
    • pp.160-170
    • /
    • 2018
  • For high power photovoltaic (PV) grid-connected converters, high order filters such as multi-tuned filters and Traps+RC filters with outstanding filtering performance have been widely researched. In this paper, the optimization of a multi-tuned filter with a low damping resistance and research on its corresponding control scheme have been combined to improve the performance of the proposed filter. Based on the characteristics of the switching harmonics produced by PWM, the proposed filter is optimized to further improve its filtering performance. When compared with the more common Traps+RC filter, the advantages of the proposed filter with low damping resistances in attenuating the major switching harmonics have been demonstrated. In addition, a simpler topology and reduced power loss can be achieved. On the other hand, to make the implementation of the proposed filter possible, on the base of the unique frequency response characteristic of the proposed filter, a digital single-loop control scheme has been proposed. This scheme is a simple and effective means to suppress the resonance peak caused by a lack of damping. Therefore, a smaller volume, better efficiency of the proposed filter, and easy implementation of the corresponding control scheme can be realized. Finally, the superiority of the proposed filter topology and control scheme is verified in experiments.

High-Order Stable Notch Filter 기법을 적용한 전력선 통신 시스템 구현 (Implementation of Power Line Communication System Appling High-Order Stable Notch filter Scheme)

  • 김경석;남윤호;김주석
    • 한국통신학회논문지
    • /
    • 제36권1C호
    • /
    • pp.28-36
    • /
    • 2011
  • 최근 인터넷이 주정보원으로 작용하고 인터넷의 보급이 확산되는 정보화시대에 인터넷망이 닿지 않는 지역의 Last Mile Solution에 적합한 대안으로서 전력선 통신에 관한 연구가 진행되고 있다. 현재 200Mbps PLC 장비가 상용화 되는 등 전력선 통신기술의 발달로 통신 인프라가 구축되지 않은 나라에서는 접근만 뿐만 아니라 백본망까지 구축하려는 연구가 진행 중이다. 하지만, 전력선 통신은 전력을 전송하도록 설계되었기 때문에 높은 고주파 신호를 보내게 되면 부근의 무선통신 서비스에 영향을 주게 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 High-Order Stable Notch Filter를 제안하였다. High-Order Stable Notch Filter는 기존의 필터들이 2차로 구현되었다는 점에 착안하여 4차, 6차, 8차, 10차 등 고차로 구현하였다. 또한, 제안한 High-Order Stable Notch Filter를 적용하여 Notch Filter Emulator를 구현하였다.

Design Methodology of Passive Damped LCL Filter Using Current Controller for Grid-Connected Three-Phase Voltage-Source Inverters

  • Lee, Jun-Young;Cho, Young-Pyo;Kim, Ho-Sung;Jung, Jee-Hoon
    • Journal of Power Electronics
    • /
    • 제18권4호
    • /
    • pp.1178-1189
    • /
    • 2018
  • In grid-connected voltage-source inverters (VSIs), when compared with a simple inductive L filter, the LCL filter has a better performance in attenuating the high frequency harmonics caused by the pulse-width modulation of power switches. However, the resonance peaks generated by the filter inductors and capacitors can make a system unstable. In terms of simplicity and filter design cost, a passive damping method is generally preferred. However, its high power loss and degradation in high frequency harmonic attenuation are significant demerits. In this paper, a mathematical design solution for a passive LCL filter to derive filter parameters suppressing the high frequency current harmonics to 0.3% is proposed. The minimum filter inductance can be obtained to reduce the size of the filter. Furthermore, a minimum damping resistance design considering a current controller is analyzed for a stable closed-loop system. The proposed design method is verified by experimental results using a 5-kW three-phase prototype inverter.

DC-Link Active Power Filter for High-Power Single-Phase PWM Converters

  • Li, Hongbo;Zhang, Kai;Zhao, Hui
    • Journal of Power Electronics
    • /
    • 제12권3호
    • /
    • pp.458-467
    • /
    • 2012
  • Single phase converters suffer from ripple power pulsating at twice the line frequency. The ripple power is usually absorbed by a bulky capacitor bank and/or a dedicative LC resonant link, resulting in a low power density and a high cost. An alternative solution is using a dc link active power filter (APF) to direct the pulsating power into another energy-storage component. The main dc link filter capacitor can then be reduced substantially. Based on a mainstream dc APF topology, this paper proposed a new control strategy incorporating both dual-loop control and repetitive control. The circuit parameter design is also re-examined from a control point of view. The proposed APF scheme has better control performance, and is more suited for high power applications since it works in CCM and with a low switching frequency.

Design of an LCL-Filter for Three-Parallel Operation of Power Converters in Wind Turbines

  • Jeong, Hae-Gwang;Yoon, Dong-Keun;Lee, Kyo-Beum
    • Journal of Power Electronics
    • /
    • 제13권3호
    • /
    • pp.437-446
    • /
    • 2013
  • This paper proposes a design scheme for an LCL-filter used for the three-parallel operation of the power converters in high-capacity wind turbines. The designs of the power devices and grid connected filter are difficult due to the high level voltages and currents in huge-capacity wind turbines. To solve these problem, this paper presents three-parallel operation and LCL-filter design techniques optimized by parallel operation. Furthermore, the design of an inverter side inductance of the LCL-filter is discussed in detail considering the switching modulation method. Simulation and experimental results demonstrate the validity of the designed filter and wind turbines.

광대역 설비용 전원선 EMI 필터의 설계 (Design of Wideband Facility Power-line EMI filter)

  • 정세교;임정규;김무현;강병극
    • 전력전자학회논문지
    • /
    • 제14권6호
    • /
    • pp.440-448
    • /
    • 2009
  • 설비용 전원선 EMI 필터(Facility power-line EMI filter)는 컴퓨터 센터와 같이 전자기적인 노이즈에 민감한 장비를 가진 배전 설비로 유입되는 EMI를 차단하기 위해 사용된다. 따라서 전류용량이 크며 특정한 응용분야에서는 MIL-STD 220 기준으로 14kHz~10GHz의 광대역에서 최고 100dB 이상의 삽입 손실(Insertion loss)이 요구된다. 이러한 요구조건을 만족하기 위해서는 광대역의 주파수에서 커패시터, 인덕터 등의 특성 분석과 고차 LC 필터 (High order LC filter) 설계기술이 필요하다. 본 논문에서는 이러한 광대역 설비용 전원선 EMI 필터의 설계에 대하여 기술하였다. 먼저, EMI 필터 설계를 위한 필터의 특징과 구조, 필터의 설계 과정, 필터 설계 방법 등에 대한 연구를 수행하였다. 그리고 필터 구성의 기본 소자인 커패시터와 인덕터의 특성에 대해 분석하였다. 최종적으로 광대역 설비용 전원선 EMI 필터를 설계 및 제작하여 실험을 수행하였으며, 실험 결과의 비교 분석을 통해 연구 결과를 검증하였다.