• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1450-1452
• /
• 2005

AC Servo system has been implemented to semiconductor equipments system for their requirements of the high resolution control. This paper is based on the newly produced DSP TMS320F2812 which has the performance of fast processing speed, 150 MIPS, and rich peripheral interface. The implemented system has been developed for the position control that also has speed and current control as inner loops. The controller implemented a high precision position control system with SVPWM and digital PI control and using high resolution rotary encoder.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.374-379
• /
• 2001

In this paper, a novel design algorithm of speed controller for an Induction motor with the inertia variation is proposed. The main contribution of our work is a very robust, reliable and stable procedure for setting of the PI gains against the specified range of the inertia variation of an induction motor using Kharitonovs robust control theory. Therefore, the basic segment of controller design, the variation of induction motor inertia is estimated by the RLS (Recursive least square) method. PI based speed controller is widely used in industrial application for its simple structure and reliable performance. In addition the Kharitonov robust control theory is used for verification stability of closed-loop transfer function. The performance of this proposed design method is proved by digital simulation and experimentation with high performance DSP based induction motor driving system.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1627-1633
• /
• 2017

This paper proposes a voice enhancing ear-protection system which is based on feedback active noise control(FBANC). The proposed system selectively suppresses the background noise and preserves the talking voice by controlling the adaptive algorithm with the voice activity period detection module. The noise reduction performance of the proposed noise canceling algorithm is analytically derived for the two key performance affecting parameters, i.e., electro-acoustic coupling distance and noise bandwidth. The proposed system is also implemented with a floating-point DSP system and its performance is experimentally tested to compare with the analytically derived results. The achieved levels of noise reduction for the three different noise bandwidths cases, i.e., 10Hz, 50Hz, and 90Hz, are high to show 17.05dB, 10.54dB and 8.99dB, respectively. The feasibility of the proposed system is also shown by the peak noise reduction achieved more than 25dB while preserving the voice component in the frequency range between 200-800Hz.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.45-53
• /
• 2003

For the improvement of welding performance, high-efficiency inverter system was designed and applied that system to the conventional large scale Flashbutt welder. The inverter systems are consists of full bridge PWM power control system and DSP controller. This inverter system has increased switching frequency of power control system of Flashbutt welder. For the test of application effects, we compared an our inverter control system with a conventional thyristor control system. In the results, we confirmed that our system has decreased the welding spatter amouts and improved welding performance.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.129-132
• /
• 2002

AE64000 is the 64-bit high-performance microprocessor that ADC Co. Ltd. is developing for an embedded environment. It has a 5-stage pipeline and uses Havard architecture with a separated instruction and data caches. It also provides SIMD-like DSP and FP operation by enabling the 8/16/32/64-bit MAC operation on 64-bit registers. AE64000 processor implements the EISC ISA and uses the instruction folding mechanism (Instruction Folding Unit) that effectively deals with LERI instruction in EISC ISA. But this unit makes branch prediction behavior difficult. In this paper, we designs a branch predictor optimized for AE64000 Pipeline and develops a AES4000 simulator that has cycle-level precision to validate the performance of the designed branch predictor. We makes TAC(Target address cache) and BPT(branch prediction table) seperated for effective branch prediction and uses the BPT(removed indexed) that has no address tags.

• The KIPS Transactions:PartA
• /
• v.18A no.2
• /
• pp.45-52
• /
• 2011

In the past, a patient went to the room where an ultrasound image diagnosis device was set, and then he or she was examined by a doctor. However, currently a doctor can go and examine the patient with a handheld ultrasound device who stays in a room. However, it was implemented with only fundamental functions, and can not meet the high performance required by the focusing algorithm of ultrasound beam which determines the quality of ultrasound image. In addition, low energy consumption was satisfied for the mobile ultrasound device. To satisfy these requirements, this paper proposes a high-performance and low-power single instruction, multiple data (SIMD) based multi-core processor that supports a representative beamforming algorithm out of several focusing methods of mobile ultrasound image signals. The proposed SIMD multi-core processor, which consists of 16 processing elements (PEs), satisfies the high-performance required by the beamforming algorithm by exploiting considerable data-level parallelism inherent in the echo image data of ultrasound. Experimental results showed that the proposed multi-core processor outperforms a commercial high-performance processor, TI DSP C6416, in terms of execution time (15.8 times better), energy efficiency (6.9 times better), and area efficiency (10 times better).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2006

Linear compressors with a free piston driven by a linear motor are widely attention in the cooling apparatus such as refrigerator due to the high efficiency The stroke of piston in the linear compressor driven by LPMSM (Linear Permanent-Magnet Synchronous Motor) can be obtained from Integrating the input voltage and current of LPMSM, but it may be diverged due to dc components in the voltage and current. The strategy to prevent the divergence of stroke using both the high-pass filter and do offset compensation was suggested. The equations for the magnitude and phase of the stroke and also dc offset including the stroke are derived as a function of the cut-off frequency of HPF. The accurate stroke of a piston can be calculated by compensating for dc offset. The performance of the newly developed stroke calculation scheme has been verified by experimentally on a linear compressor drive system, where the control was implemented by a 16-bit DSP.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.137-148
• /
• 2002

Direct Torque Control(DTC) is considered to be an useful control scheme of high performance induction motor drives because the scheme provides a quick torque response without requiring the complex field-orientation block and inner current regulation loop. Among a few drawbacks of the conventional DTC scheme, large current harmonics due to flux drooping phenomenon in a low speed range may be the major difficulty In order to remove the difficulty, a fuzzy variable switching sector scheme and its real-time implementation algorithm are proposed in this paper. A DSP based control board is designed for the Induction motor drives with the DTC scheme including the fuzzy switching sector algorithm. Simulation and experimental results show the effectiveness of the proposed scheme.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.95-103
• /
• 2009

We improve the performance of WCDMA repeater by cancelling the feedback interference radio signal under the fixed point implementation. Floating-point DSP or FPGA to implement the ICS algorithm may have an disadvantage of high cost, To solve this problem, we suggest the ICS algorithm based on LMS under fixed point operation, and show the validity of our results by comparing with the floating-point results through numerical simulation.