• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.87-94
• /
• 2007

In active sonar system, aspect angle and length of a target can be estimated by calculating the cross-correlation between left and right split-beams of a LFM(Linear Frequency Modulated) signal. However, high-resolution performances in bearing and range are required to estimate the information of a remote target. Because a certain higher sampling frequency than the Nyquist sampling frequency is required in this performance, an over-sampling process through interpolation method should be required. However, real-time implementation of split-beam processing with over-sampled split-beam outputs on a COTS(commercial off-the-shelf) DSP platform limits its performance because of given throughput and memory capacity. This paper proposes a cumulative processing algorithm for split-beam processing to solve the problems. The performance of the proposed method was verified through some simulation tests. Also, the proposed method was implemented as a real-time system using an ADSP-TS101.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.233-240
• /
• 1998

This paper presents a high efficiency low switching PWM technique for the propulsion system of Electric car. In order to achieve the continuous voltage control to six-step and a low harmonics with low switching frequency under 500㎐, the synchronous technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method is shown by the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons electric cars.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.606-613
• /
• 2002

In this paper we applied a transmit beamforming technique to the underwater acoustic communication system for high rate data transmission. A prototype transmit system was designed and implemented with the general purpose DSP processor and multiple digital-to-analog converters. The performances of the implemented system were evaluated by the experiment in water tank. In order to simplify the procedure the channel coding and equalizer were omitted. And the simplest OOK (On-Off Keying) technique in digital communication methods was applied. The experimental result shows that the transmission data rate is higher about 3 times in the case of 5 hydrophone transmitting may than 1 hydrophone transmitter at bit error rate 10/sup -2/. We verified that the maximum data rate was 400 bps for speech signal transmission in water tank.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.417-424
• /
• 2010

This paper proposes a new islanding detection method for a grid-connected photovoltaic system. It is based on the fact that the equivalent harmonic components vary according to the grid connection status. The advantage of the proposed method is the reduced Non-Detection Zone and fast detection time. Also it can have the robust detection capability against grid disturbances. The theoretic analysis using grid-harmonic modeling is performed and verified by test result using 32-bit high performance DSP processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1064-1069
• /
• 2008

A system design and realization for video surveillance with interframe probability distribution analyzation is presented in this paper. The system design is based on a high performance DSP professor, video surveillance is implemented by analyzing interframe probability distribution using trivariate normal distribution(weight, mean, variance) for scanning objects in a restricted area and the video analysis algorithm is decided for forming a different image from the probability distribution of several frame compressed by the standardized JPEG. The system processing time of D1$(720{\times}480)$ image per frame is 85ms and enables to process the system at 12 frames per second. An object surveillance about the restricted area by rules is extracted to 100% unless object is moved faster.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.43.3-43
• /
• 2002

$\textbullet$ A high performance motion controller can be applied to a wider range areas. $\textbullet$ Users can easily add, delete, or modify the library functions in this motion controller $\textbullet$ users can easily create, delete, or change GUI menu in this motion controller $\textbullet$ The motion related libraries base on IEEE/NEMI low-cost open architecture controller specification. $\textbullet$ Many low-level libraries and GUI that can make users easily interface with hardware are developed. $\textbullet$ Various velocity profiles are generated for performing given tasks efficiently. $\textbullet$ The hardware of a high performance motion controller is developed with using DSP and PLD.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.425-430
• /
• 1998

This paper presents a high performance low switching PWM technique for the propulsion system of railway such as subway and high speed train. In order to achieve the continuous voltage control to six-step and a low harmonics with low switching frequency under 500Hz, the synchronous PWM technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method are showed by the digital simulation and the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons railway vehicles.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.10
• /
• pp.571-578
• /
• 1999

Current waveform control of pulse MAG welding power source is studied so that welding of thin plates may obtain high speed and improved performance. In this paper, waveform control method is proposed, digital controller using DSP is able to control the current waveform precisely. High speed welding of thin plates using pulse MAG welding method is made possible. Performance test for 1.2mm thin plates is carried out, output waveform and welding performance is analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.221-227
• /
• 2013

Recent studies have been conducted on powerline communications as a viable alternative to the spread of the spread of the Internet and the Internet as the chief source of information act in the information age, the internet does not reach local Last Mile Solution. Powerline communication, but because it has been designed to transfer power to the high frequency signal to be sent when the close of wireless communications services impacted. The notch filters of a common way to eliminate the interference are used. In this paper, a dynamic high-performance notch filter applying WDF performance was verified through MATLAB and was implemented using a TI's TMS320C6416T DSP board.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.1-8
• /
• 2011

Power Line Communication (PLC: Power Line Communication) to propagate the current power lines are in every household of the existing infrastructure is the most extensive network configuration. In addition, the cost required for network configuration, the advantage of almost zero for the investors and is sufficient to attract the attention of operators. The PLC is supply power to power lines used the voice and data communication technologies put it on KHz ~ tens of hundreds of high-frequency signal MHz. But because uses power lines as existing wireless communications systems will occurs interference. The notch filters of a common way to eliminate the interference are used. In this paper, a dynamic high-performance notch filter applying CIC filter performance was verified through MATLAB and was implemented using a TI's TMS320C6416T DSP board.