• 한국가스학회지
• /
• 제17권5호
• /
• pp.8-14
• /
• 2013

천연가스에 수소를 첨가하는 수소-천연가스 혼합연료 (HCNG) 엔진 기술은 수소의 빠른 화염속도와 넓은 가연범위를 이용하여 출력 및 배기성능을 최적화하는 기술로서 희박연소 한계를 증가시킴으로써 열효율의 개선은 물론 유해배출물의 저감을 얻을 수 있다. 그러나 과급장치를 사용하는 희박연소 엔진의 경우 전부하 운전조건에서 희박연소 한계의 증가는 충분한 공기량을 공급할 수 있도록 과급용량의 증가가 선결되어야 구현될 수 있다. 본 연구에서는 HCNG 엔진 개발의 일환으로 과급시스템의 변경에 의한 엔진의 출력특성을 파악하고, 과급용량 증대의 적용가능성을 검토하고자 하였다. 터보차저가 과급압력의 증대 보다는 유량이 증가된 영역에서 효율이 높게 설계된 경우 농후한 혼합기 조건에서는 과급압력이 감소되더라도 제원상의 출력을 만족하며 효율적인 운전이 가능하였다.

• 생약학회지
• /
• 제43권1호
• /
• pp.10-15
• /
• 2012

An accurate and sensitive analysis method was established for simultaneous determination of three bioactive compounds (glycyrrhizin, 6-gingerol and ginsenoside Rg3) in the Ejung Tang with high-performance liquid chromatography (HPLC)-photodiode array detection (DAD)-electrospray ionization (ESI)-Mass spectrometry (MS). The optimizing chromatographic separations a were acquired by an $C_{18}$ column ($5{\mu}m$, $4.6I.D{\times}250mm$, SHISHEDO) using gradient elution with water comprising 0.1% TFA(trifluoroacetic acid) and acetonitrile at a performing temperature of $35^{\circ}C$. Flow rate was 1.0 ml/min. A detection UV wavelength set at 205 nm and 250 nm. The three compounds were identified by electrospray ionization mass spectrometry. All calibration curves indicated great linear regression within test ranges ($R^2>0.9997$). The established method provided acceptable precision and accuracy. The relative standard deviations (RSDs) of intra-day and inter-day were less than 2.00% and 3.00%, respectively. The recoveries were found to range from 94.49 to 101.10% for the three compounds analyzed. These results showed that this method was effective and reliable for quality control of Eiung-Tang.

• 생약학회지
• /
• 제45권3호
• /
• pp.200-208
• /
• 2014

In this study, we performed quantification determination of four major components including aurantio-obtusin, emodin, chrysophanol, and physcion in the 70% ethanol extracts of non-processed Cassiae Semen and processed Cassiae Semen using a high-performance liquid chromatography coupled with photodiode array detector. The analytical column for separation of the 4 constituents used a Gemini $C_{18}$ column kept at $40^{\circ}C$ by the gradient elution with 1.0% (v/v) acetic acid in water and 1.0% (v/v) acetic acid in acetonitrile as mobile phase. The flow rate was 1.0 mL/min and the injection volume was $10{\mu}L$. The amount of aurantio-obtusin, emodin, chrysophanol, and physcion in non-processed Cassiae Semen were 0.07%, 0.02%, 0.25%, and 0.10%, respectively. The amount of aurantio-obtusin, emodin, chrysophanol, and physcion in processed Cassiae Semen were 0.04-0.14%, 0.01-0.03%, 0.02-0.42%, and 0.01-0.24%, respectively. Consequently, the optimal processing condition of Cassiae Semen for the improvements of amounts of four anthraquinone compounds was obtained by roasting at $240^{\circ}C$ for 15 min.

• Natural Product Sciences
• /
• 제16권2호
• /
• pp.116-122
• /
• 2010

A high-performance liquid chromatography (HPLC) with diode array detector (DAD) and electrospray ionization mass spectrometry (ESI-MS) was established for the simultaneous determination of five representative metabolites of the iridoid and phenolic classes from Rehmannia glutinosa. The optimal chromatographic conditions were obtained on an ODS column (5 mm, $4.6{\times}250\;mm$) with the column temperature at $25^{\circ}C$. The mobile phase was composed of water and acetonitrile using a gradient elution with the flow rate 0.3 mL/min. Detection wavelength was set at 205 nm. All calibration curves showed good linear regression ($r^2$ > 0.997) within test ranges. Limits of detection (LOD) and quantitation (LOQ) values were lower than 0.123 and $0.373\;{\mu}g/mL$, respectively. The developed method provided satisfactory precision and accuracy with overall intra-day and inter-day variations of 0.09 - 0.76% and 0.16 - 1.41%, respectively, and the overall recoveries of 99.03 - 102.67% for all of the compounds analyzed. In addition, effectiveness of diverse extraction methods was compared to each other for the development of standard analytic method. The verified method was successfully applied to the quantitative determination of five representative metabolites in twenty-one commercial Rehmannia glutinosa samples from different markets in Korea and China. The analytical results showed that the contents of the five analytes vary significantly with sources.

• Journal of Chest Surgery
• /
• 제49권1호
• /
• pp.22-28
• /
• 2016

Background: Carotid endarterectomy (CEA) with selective shunting is the surgical method currently used to treat patients with carotid artery disease. We evaluated the incidence of major postoperative complications in patients who underwent CEA with selective shunting under transcranial Doppler (TCD) at our institution. Methods: The records of 45 patients who underwent CEA with TCD-based selective shunting under general anesthesia from November 2009 to June 2015 were reviewed. The risk factors for postoperative complications were analyzed using univariate and multivariate analysis. Results: Preoperative atrial fibrillation was observed in three patients. Plaque ulceration was detected in 10 patients (22.2%) by preoperative computed tomography imaging. High-level stenosis was observed in 16 patients (35.5%), and 18 patients had contralateral stenosis. Twenty patients (44.4%) required shunt placement due to reduced TCD flow or a poor temporal window. The 30-day mortality rate was 2.2%. No cases of major stroke were observed in the 30 days after surgery, but four cases of minor stroke were noted. Univariate analysis showed that preoperative atrial fibrillation (odds ratio [OR], 40; p=0.018) and ex-smoker status (OR, 17.5; p=0.021) were statistically significant risk factors for a minor stroke in the 30-day postoperative period. Analogously, multivariate analysis also found that atrial fibrillation (p<0.001) and ex-smoker status (p=0.002) were significant risk factors for a minor stroke in the 30-day postoperative period. No variables were identified as risk factors for 30-day major stroke or death. No wound complications were found, although one (2.2%) of the patients suffered from a hypoglossal nerve injury. Conclusion: TCD-based CEA is a safe and reliable method to treat patients with carotid artery disease. Preoperative atrial fibrillation and ex-smoker status were found to increase the postoperative risk of a small embolism leading to a minor neurologic deficit.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.49-53
• /
• 1998

온라인 가스 크로마토그래피와 같은 실시간 분석기기는 데이터 채취 및 분석과정의 시간이 오래 걸려 측정 신뢰성이 낮으며 또한 설치 및 보수비용이 많이 들어서, 실제 가스 산업 공정에서는 온도, 압력과 같은 공정의 운전 변수들을 이용하여 간접적으로 가스의 성분 및 양을 감지하는 소프트 센서에 관한 연구가 활발하게 진행 중이다. 본 연구에서는 데이터 기반 소프트 센서의 설계에 있어서 공정 데이터가 갖는 패턴을 잘 반영하여 추정 능력을 높이는 내적 조합모델 PLS를 제안하고, 이를 산업체의 농도 추정 목적으로 적용하였다. 제안된 PLS모델은 기존에 제시된 모델들보다 뛰어난 추정 능력을 보였다.

• 한국정보통신학회논문지
• /
• 제12권3호
• /
• pp.555-562
• /
• 2008

본 논문에서는 RTL 수준에서의 클록 게이팅을 이용한 실제적인 저전력 설계 기술에 대해서 제안하고자 한다. 상위 수준의 회로 설계자에 의해 시스템의 동작을 분석하여 클록 게이팅을 위한 제어기를 이용하는 것이 가장 효율적인 전력 감소를 가져 온다. 또한 직접적으로 클록 게이팅을 수행하는 것보다는 합성툴이 자연스럽게 게이팅된 클록을 맵핑할 수 있도록 RTL 수준에서 유도하는 것이 바람직하다. RTL 코딩 단계에서부터 저전력이 고려되었다면 처음 코딩단계에서부터 클록을 게이팅 시키고, 만일 고려되지 않았다면 동작을 분석한 후에 대기 동작인 부분에서 클록을 게이팅 한다. 그리고 회로의 동작을 분석한 후에 클록의 게 이팅을 제어하기 위한 제어기를 설계하고 합성 툴에 의해 저전력 회로에 해당하는 netlist를 얻는다. 결과로부터 상위수준의 클록 게이팅에 의해 레지스터의 전력이 922 mW에서 543 mW로 42% 감소한 것을 확인할 수 있다. Power Theater 자체의 synthesizer를 이용하여 netlist로 합성한 후에 전력을 측정했을 경우에는 레지스터의 전력이 322 mW에서 208 mW로 36.5% 감소한 것을 확인할 수 있다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.1-8
• /
• 2016

초음파 진동자에 의해 미립화된 탄화수소계 액체연료를 연소시키는 버너의 연소장을 가시화시키기 위한 실험이 수행되었다. 초고속카메라와 열화상 카메라를 이용하여 화염형상 및 연소장 이미지를 획득하였으며, 후처리를 통해 화염과 연소장의 구조 및 거동을 면밀히 분석하였다. 수송기체 유량이 증가하면 연소반응이 촉진되어 연소영역이 신장되고, 반응온도가 증가하였다. 또한, 시간에 따른 가시화염과 IR 연소장의 거동변화를 비교분석하여 화염의 진동특성을 고찰하였다.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.9-18
• /
• 2011

This study assessed the performance of a compact heat exchanger with staggered tube banks for recuperation of high temperature exhaust thermal energy for SOFC fuel cell system. The compact heat exchanger in this study is two pass system which consists of $315{\times}202.5{\times}48.5mm^3$ and 132 tubes of $6.0mm{\Phi}$ for each heat exchanger. From experiments of the 2 pass heat exchanger system, air temperature was increased from $60{\sim}85^{\circ}C$ to $402{\sim}482^{\circ}C$ while gas temperature was decreased from $600^{\circ}C$ to $305{\sim}402^{\circ}C$ according to mass flow rates of 3.9~7.8 g/s. The experimental heat transfer rates of the heat exchanger were compared with CFD numerical solutions with the conventional ${\xi}-NTU$ method. From the comparisons, the following conclusions were obtained. For the heat exchanger system, the relative errors of heat transfer rate by CFD solution were from 7.1 to 27%, and those by ${\xi}-NTU$ method were from 0.6% to 21% compared with experimental data. From the comparisons, it can be said that both of CFD and ${\xi}-NTU$ method almost simulated to experimental data except specific conditions. Pressure drops through air tubes and gas passages were calculated with both of the CFD computation and head loss equations. The differences between them were from 14 to 22%.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.59-66
• /
• 2000

In a previous paper, we have examined the effects of nozzle configuration and jet to jet spacing on the heat transfer of 1 row of circular water jets. In this paper, experiments have been conducted to obtain the effects of nozzle to target plate distances on the heat transfer of 1 row of 3 jets and 1 row of 5 jets. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type. Nozzle to target plate distance H was varied from 16 mm(H/D=2) to 80mm(H/D=10). For fixed value of mass flow rate and nozzle to target plate distance, larger values of average Nusselt number were obtained for the smaller jet to jet spacing. For the array of water jets, the average heat transfer was decreased slightly with increasing nozzle to target plate distance at low jet velocity of $\textrm{V}_{o}$=3 m/s. However, except for $\textrm{V}_{o}$=8 m/s of 1 row of 5 jets, it was increased with increasing nozzle to target plate distance at high jet velocity of $\textrm{V}_{o}$$\geq$6m/s. We proposed to apply the nozzle configuration of maximum average heat transfer to each nozzle to target plate distance for 1 row of 3 jets, and, it was Reverse cone type nozzle for 1 row of 5 jets(Reynolds number$\geq$36000).