• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.295-298
• /
• 2012

Repair and strengthening is necessary to extend the service life of existing buildings. Polymer-modified cement mortar (PCM) has been extensively used as a high performance material particularly for finishing and repairing works in concrete building because of itsexcellent adhesion, waterproofing, resistance to chemical attack, and workability. As PCM contains organic polymer, it is necessary to clarify its properties at high temperature under fire, on which sufficient data are not available. This paper evaluated the burn-up characteristics of polymer-modified cement mortar with cone calorimeter test, non-combustibility test and flammability test with experimental parameters such as the types of polymer, unit-polymer content, polymer-cement ratio and thickness of the specimen.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.270.1-270
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.335-335
• /
• 2001

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.383-387
• /
• 2004

• Journal of the Korean Burn Society
• /
• v.23 no.2
• /
• pp.42-53
• /
• 2020

Purpose: It is important to consider both clinical factors and epidemiological factors in treating burn patients in emergency rooms. However, many emergency medical staffs happen to miss their chances of treating burns based on these considerations. This study is designed to find a better treatment for burn patients in emergency rooms along this approach. Methods: This study was conducted based on the data of the burn patients visiting the emergency room of a single general hospital from January 2015 to December 2019. The epidemiological and clinical factors were extracted out of the data, then the relationship between the prognosis and these factors were analyzed. Results: Most of burn accidents occurred at home, and were caused by hot water, soup, drinks, oil, etc. Especially, flame burns showed high hospitalization rate, surgical rate and mortality. In addition, their prognosis was poor when the affected area included facial, limb and perineal areas etc., or any inhalation burn co-existed. Also, the hospitalization rate and period increased when the treatment time was delayed or the pre-treatment was taken. There was a strong relationship between prognosis and the period of follow-up when patients were admitted during the period. Conclusion: It is difficult for medical staffs to evaluate prognosis of burns in emergency rooms due to progressive damages. Precise treatment and disposition are essential for patients' good prognosis. Therefore, medical staffs should establish treatment plans by identifying the patient's epidemiological and clinical factors, rather than giving prescriptions based on fragmentary and superficial symptoms.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.3
• /
• pp.151-164
• /
• 2004

The changes of microstructural and mechanical properties were evaluated for the high burn-up fuel claddings after the neutron irradiation of $1.8{\sim}3.1{\times}10^{20}n/cm^2$ (E>1.0 MEV) in HANARO research reactor. After the irradiation, the spot-type dislocations (a-type dislocations) were easily observed in most claddings, and the density of the dislocations was different depending on the grains and was higher at grain boundaries than within grains. As the final annealing temperature increased, the density of spot-type dislocations increased and the line-type dislocations (c-type dislocations) which was perpendicular to the <0002> direction, appeared sporadically in some claddings. However, the types of precipitates in the fuel claddings after the irradiation were not changed from that in unirradiated claddings. The mechanical properties including the hardness, strength and elongation after the irradiation were changed due to the formation of spot-type dislocations. That is, the increase in hardness and strength as well as the decrease in elongation after the irradiation was occurred simultaneously with increasing the final annealing temperature. Owing to the Nb contribution to the formation of spot-type dislocation during the irradiation, the increase in hardness and strength in higher Nb-contained Zr alloys after the irradiation was higher than that in lower Nb-contained Zr alloys.

• Archives of Reconstructive Microsurgery
• /
• v.11 no.2
• /
• pp.179-185
• /
• 2002

The wrist and forearm are a frequently damaged area in high tension electrical injury as an input or output of the current. Electrical burns affecting the wrist and forearm may produce full thickness necrosis of the skin and damage deep vital structures beneath the eschar, affecting the local tendons, nerves, even bones and joints which result in serious dysfunction of the hand. From January 1997 to December 2001, we had treated 20 patients with high tension electrical burn in the wrist and forearm using anterolateral thigh free flap. Average follow up period were 24 months and we get satisfactory results both in functional and aesthetic aspects. This flap is considered useful in one-stage reconstruction of wide and large soft tissue defect combined with arterial injuries.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.201-209
• /
• 2015

Currently, 23 nuclear power plants are in operation at Kori, Uljin, Younggwang and Wolsong site and a reference deep geological disposal system has been developed for the spent fuels generated by them. The reference spent fuel for this disposal system has 4.5wt% of initial enrichment, 55 GWd/MtU of burn-up, and 40 years of cooling time. In this paper, to improve disposal efficiency and economic feasibility, the characteristics of spent fuels from nuclear power plants, such as type and burn-up, were reviewed. A disposal canister concept for shorter length and relatively lower burn-up spent fuels than the reference spent fuels was developed. Based on this canister concept, thermal analyses were carried out and a deep geological disposal concept was proposed. Measures of disposal efficiency such as unit disposal area and disposal density were compared between this disposal system and the reference disposal system. Also, economic feasibility, such as the volume reduction of copper, cast iron, and bentonite, was analyzed and the results of these analyses showed that the disposal system proposed in this paper has an efficiency of at least 20%. These results could be used for establishing spent fuel management policy and designing practical disposal systems for spent fuels.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6761-6763
• /
• 2015

Aims: To investigate the role of swelling anesthesia in repairing facial soft tissue defects after tumor resection and temporal superficial artery frontal branch of narrow pedicle flap. Materials and Methods: From January 2008 to June 2008, 16 patients from Department of Ophthalmology with eye or eyelid tumors after eyeball removal of eye and part resection of surrounding soft tissue, undergoing postoperative swelling anesthesia with superficial temporal artery flap repair to prevent facial soft tissue defect formation and bone exposure, were recruited. Results: In all 16 patients facial soft tissue defect repair had good effects, with limited bleeding, and short operation times. Seven days after surgery, all flaps were in good repair. On postoperative follow-up after 3 months, flaps showed a similar appearance as with facial tissue. Conclusions: Swelling anesthesia for superficial temporoparietal artery frontal branch of narrow pedicle flap to repair soft tissue defect after facial tumor resection is feasible, and is linked with good analgesic effects, high postoperative survival of skin flaps, and good cosmetic effects.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.383.1-383
• /
• 2001