• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.19-22
• /
• 2007

Recently, the population of people exploring High Mountain trekking or expedition is increasing as an increase in the backpackers. Many accidents occurring at High Mountain above 6,000 m are the results of snow blindness. The damage of cornea and/or retina is direct cause of snow blindness. The UV intensity increases on the hand, along with the altitude caused by decrease in the atmospheric pressure, on the other hand the reflections by bright snow at high mountain area. And it increases approximately 3 times and 4 times higher than the ground level at altitude of 4,000 m and 8,000 m, respectively. The use of sunglasses is more favorable than goggles for the protection of snow blindness at High Mountains. The eye frames that have high mechanical strength and the plastic lenses which can protect UV 100% are recommended. The attachable shielding pads are needed to prevent the incident UV light reflected or scattered from the gap between glasses frame and face. The sunglasses must have flexible and long temples to wind the ears adequately for the prevention of detachment during climbing and it is recommended that the metal frame to be coated with plastics to prevent the eye surroundings from frostbite.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.927-934
• /
• 2011

Design parameter analysis is performed for a solar-powered UAV, storing potential energy by climb flight. Parameters related to the flight for saving potential energy, i.e. minimum & maximum altitudes for level flight, gliding & climbing angle, design point speed & altitude, gliding & climbing start time are investigated as design parameters. Weight and size of the UAV are determined using a weight model for the components of the solar-powered UAVs. Produced energy and consumed energy are calculated using these weight and size, yielding the required weight of the battery for a given mission. Relationship between the total weight of the UAV and each parameter is investigated. For the parameters listed above, there exist their ranges only where the design is possible. And there exist optimal values of these parameters minimizing the total weight.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.84-99
• /
• 2021

As the micro-mobility market grows, the demand for route guidance, that includes uphill information as well, is increasing. Since the climbing angle depends on the electric motor uesed, it is necessary to establish an uphill road DB according to the threshold standard. Although road alignment information is a very important element in the basic information of the roads, there is no information currently on the longitudinal slope in the road digital map. The High Definition(HD) map which is being built as a preparation for the era of autonomous vehicles has the altitude value, unlike the existing standard node link system. However, the HD map is very insufficient because it has the altitude value only for some sections of the road network. This paper, hence, intends to propose a method to generate the road longitudinal slope using currently available data. We developed a method of computing the longitudinal slope by combining the digital elevation model and the standard link system. After creating an altitude at the road link point divided by 4m based on the Seoul road network, we calculated individual slope per unit distance of the road. After designating a representative slope for each road link, we have extracted the very steep road that cannot be climbed with personal mobility and the slippery roads that cannot be used during heavy snowfall. We additionally described errors in the altitude values due to surrounding terrain and the issues related to the slope calculation method. In the future, we expect that the road longitudinal slope information will be used as basic data that can be used for various convergence analyses.

• Korean Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.61-67
• /
• 2015

This study, which was conducted from Apr. 2013 to Jan. 2014, was carried out as part of a project of making a more detailed ecological zoning map with 1/5,000 scale. The necessity of electronic vegetation map with large scale has arisen in order to make the best use of basic research findings on resource monitoring of National Parks and to enhance efficiency in National Park management. In order to improve accuracy and speed of vegetation research process, the data base for vegetation research was categorized into five groups, namely broad-leaved forest, coniferous forest, mixed forest, rock vegetation and miscellaneous one. And then a vegetation map for vegetation research was created for the research on the site. What is in the database for vegetation research and the vegetation map reflecting findings from vegetation research showed similar distribution rate for broad-leaved forest with 71.965% and 71.184%, respectively. The distribution rate of coniferous forest (16.010%, 15.747%), mixed forest (10.619%, 12.085%), and rock vegetation (0.015%, 0.002%) did not have much difference. In a detailed vegetation map reflecting vegetation research findings, the broad-leaved mountain forest was the most widely distributed with 60.096% based on the physiognomy classification. It was followed by mountain coniferous forest (16.332%), mountain valley forest (15.887%), and plantation forest (3.558%) As for vegetation conservation classification evaluated in the national park, grade I and grade II areas took up 200.44 km2, 61.80% and 108.80 km2, 33.55% respectively. The combined area of these two amounts to 95.35%, making this area the first grade area in ecological nature status. This means that this area is highly worth preserving its vegetation. The high rate of grade I area such as climax forests, unique vegetation, and subalpine vegetation seems to be attributable to diverse innate characteristics of Odaesan National Park, high altitude, low level of artificial disturbance, the subalpine zone formed on the ridge of the mountain top, and their vegetation formation, which reflects climatic and geological characteristics, despite continuous disturbance by mountain climbing.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.144-161
• /
• 1990

Pine forest communities developed in Mt. Palgong, southeastern Korea, were studied phytosociologically, with special reference to multiple management of local forests, and were classified into two communities, Pinus densiflora - Quercus mongolica community(I : mountain forest) and P. densiflora-Climbing plants community (II : valley forest) and six subgroups accompanied by several subgroups. Judging from the coincidence method, the division of communities (vegetation units) was closely related to altitude and topography. Based on vegetation units, a vertical distribution map of pine forest communities was prepared. The species composition(%) of pine forest communities under stratification, in upper and lower tree layer, teas I higher than II, in middle and shrubs lacer II higher than I (Total : Upper 15.5%, Middle 28.4%, Lower 34.6%. Shrubs 21.5%. Sum of mean coverage%i of understory vegetation was II twice as high as I (Total. shrubs 28.4%. forbs 11.4%, Graminoids 11.8%, ferns 1.0%). Based on constance, coverage and d.b.h. class etc., an actual growth and occurrence table of tree species and understory vegetation by vegetation unity were prepared, and could assume a criterion for judging potential dominance-growth conditions.