• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.460-472
• /
• 1995

This study was aimed to provide understanding on the eco-physiological response of barley tillers as affected by difference in seeding date. Yield and yield contribution rates of tillers were investigated with the data of field experiments in the former Wheat and Barley Research Institute of Suwon, Korea from September 1982 to July 1984. When barley was sowed 15 days earlier than or at the locally recommended sowing date (i.e. October 5), it produced more mainstem leaves than the that sowed 15 days later than the local recommendation. The effective tillers (i.e. ear-bearing tillers) were observed in concurrently occurring leaves up to 10/0 (abbreviation of the 10th mainstem leaf) from early and optimum sowed crops, while 9/0 from late sowed crops. Tillering followed the production rule of Gatayama(l952) which has the linear leaf appearance pattern. Early sowing produced more effective tillers, but the highest production of effective ears (i.e. ears heavier than 0.505g) was noticed in sowing at the recommended date. The tillers in the axil of first leaf in mainstem (abbreviated as 1) produced more effective ears than other mainstem tillers (i.e. primary tillers such as C, 2, 3 and 4). The tillers from the axil of first leaf, whether they were primary or secondary, always performed better in the production of effective tillers, grains per ear, grain weight, and grain yield per ear than those from the axil of coleoptile or prophyll. Other tillers from subsequent leaves were also inferior in production with the order of their appearance, thus making first leaf tillers as the best performer(e.g. 1 against C, 2, 3, 4 of primary tillers, 11 and 21 against 1P, 12, 13, 2P, 22 of secondary tillers). Even though the first leaf tiller from the first mainstem leaf(i.e. 11) emerged at a same time with the fourth mainstem leaf tiller(i.e. 4), it was always a better producer of ears and grains. The above observations of hierarchy among tillers were persistent irrespective of cropping conditions and treatments. Sowing at the recommended date produced more effective tillers and grains per ear than early or late sowing. In early and late sowings, more grains per effective ear were observed by early sowing, whereas more grains per ear were produced by late sowing. The order of performance in production of effective tillers and ears per plant was as follows: optimum > early > late sowings. In optimum sowing the mainstems were the highest in grain weight per ear, while the first leaf tillers were the ones in early sowing probably due to winter damage on mainstem ears. Yield contribution by the tillers was greater with the following order irrespective of sowing dates: mainstem, 1, 2, 3, C, 11, 12 and Cl. The contribution of CP, 2P, 21 and 31 varied with sowings.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.174-197
• /
• 2024

Personal ornaments made from precious metals that have been excavated from tombs dating to the Maripgan period (4th-6th century) of the Silla Kingdom are a major subject of analysis in the study of gender and hierarchy among the tomb occupants. Nonetheless, bracelets had been neglected until Ha Daeryong's recent research on determining gender through bracelets attracted attention. Accordingly, an examination and organization of the fundamental elements of Silla bracelets was needed. In response, this paper examines their physical characteristics, appearance, changes over time, and related wearing practices. The data for this study is derived from 176 bracelets, mostly made from silver or gold. Copper and glass bracelets are also included. Many of them were cast in a single-use earthen mold. Even the notched and protruding designs were created by casting rather than carving. Glass bracelets and bracelets with dragon designs were made using molds with round cavities. Excluding those produced using metal sheets, the rest of the bracelets are thought to have been cast in a mold with a long-string-shaped cavity and then bent round. After being bent, the two ends were either soldered together (closed type) or left open (open type). As demonstrated in the study by Lee Hansang, Silla bracelets evolved from plain rounded rod-shaped bracelets, such as the one excavated from the Northern Mound of Hwangnamdaechong Tomb, to versions with notched designs, and eventually to those with protruding designs, which gained popularity by the sixth century. The precedents of plain rounded rod-shaped bracelets are presumed to have been thin rod-shaped bracelets from the Proto-Three Kingdoms period. Bracelets need to be fit to the wrists so that they do not slip off easily when worn. The open type design was the preferable way to achieve this. Moreover, given the ductility of gold, silver, and copper, it seems that it would have been possible to stretch or deform them. In the end, I concluded that even if a bracelet is too small to pass man's hand, the open type could have been worn. Furthermore, if a closed-type bracelet were pressed into an oval shape, it would not be impossible for a man to put it on. When bracelets are divided according to their degree of deformability into type A (the open type) through type D, which is almost impossible to deform, type A is commonly found with wearers of thin hollow earrings, and types C and D (which are difficult to deform) are not found with wearers of thin hollow earrings, but only with wearers of thick hollow earrings. Therefore, it can be seen that men were allowed to wear bracelets, and the existing studies that differentiate between men and women based on the wearing of thin hollow earrings, thick hollow earrings, and swords remain valid.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.535-542
• /
• 1998

This study was carried out for the purpose of supplying the basic data for artificial forestation, natural regeneration and ecological conservation etc., and obtaining information on alpine vegetation, by establishing vegetation units on the basis of phytosociological classification of community and studying growth pattern on the basis of species composition, hierarchy structure and population dynamics, for Taxes cuspidata naturally growing at the alpine districts in Korea. The importance value of Taxus cuspidata by districts mostly showed above 100 in the upper story but at Mt. Chiri and Mt. Hanra communities its value was comparatively low. In the middle story it showed lower value than that of upper story and not quite showed at Mt. Chiri. Taxus cuspidata communities in the lower story were only in Mt. Hanra, Mt. Odae and Mt. Sobaek, and their importance values were about 10 which were relatively low values. The communities were classified into five groups as Taxus cuspidata-Males baccata var. mandshurica, Taxus cuspidata-Abies nephrolepis, Taxus cuspidata-Abies koreana, Taxus cuspidata-Acer mono and Taxus cuspidata-Euonymus quelpaertensis by TWINSPAN analysis. Taxus cuspidata-Abies koreana community was distributed at the northern aspect of the mountain ridges and at higher elevation than other communities and distributed. Taxus cuspidata-Acer mono community was relatively low than the others and distributed at the hillsides of mountain. And Taxus cuspidata-Euonymus quelpaertensis communities were distributed at the relatively high elevation and northern and eastern aspect of the mountain tap, and Taxus cuspidata-Malus baccata var. mandshurica communities were distributed at the medium elevation, and southern and eastern aspect of the mountain ridge. In the relation between communities and environmental factors, it was correlated with aspect, elevation and topography at the first axis, and elevation, slope at the second axis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.

• Korean Journal of Social Welfare
• /
• v.57 no.3
• /
• pp.73-103
• /
• 2005

This study takes of youth panel data(2002-2003), there is the purpose to know to youth employed's labor mobility conditions of employment status conversion and examine on factors affecting conversion of employment status. Main analysis result and policy imply, is as following. First, although youth employed's non-standard employment shows some decrease, employment youth hierarchy was construed that youth of our country is consisting very changefully because appear great turnover that is converted by unemployment or Not economically activity population same period. Specially, non-standard employment phenomenon of woman or low in scholarship person appeared notedly, and because phenomenon that is converted by unemployment or Not economically activity population is expose that is deepened, discriminating policy of government dimension is required for employment stabilization of these class. Second, show result that danger to escape to non-standard job risk trap which seeking employment activity of youth class is arranged case or company which is formed by official path is suitable becomes low, must formulate path of employment about youth class and improve qualitative level of employment through suitable job placement education of youth class or function (technology) level. Third, when was construed, but take into account that the although large enterprise have low risk in non-standard job, recently employment of youth class consists very limited, rather small scale business or smaller enterprise's competitive power preferably need to be plan. Finally, danger to non-standard job youth employed's company form is government connection wonder was expose that high, Such result can do that it is difficult by limited research period, but reflect actuality that youth unemployment policy of our country is enforced laying stress on public labor or unregular job employment such as internship system. Therefore, current youth unemployment policy may have to change by employment policy that can secure stable work record by youth class or act as bridge-building that promote conversion by full-time job.

• Journal of Environmental Policy
• /
• v.13 no.1
• /
• pp.69-93
• /
• 2014

The aim of this research was to develop a climate change vulnerability index at the district level (Si, Gun, Gu) with respect to the health care sector in Korea. The climate change vulnerability index was esimated based on the four major causes of climate-related illnesses : vector, flood, heat waves, and air pollution/allergies. The vulnerability assessment framework consists of six layers, all of which are based on the IPCC vulnerability concepts (exposure, sensitivity, and adaptive capacity) and the pathway of direct and indirect impacts of climate change modulators on health. We collected proxy variables based on the conceptual framework of climate change vulnerability. Data were standardized using the min-max normalization method. We applied the analytic hierarchy process (AHP) weight and aggregated the variables using the non-compensatory multi-criteria approach. To verify the index, sensitivity analysis was conducted by using another aggregation method (geometric transformation method, which was applied to the index of multiple deprivation in the UK) and weight, calculated by the Budget Allocation method. The results showed that it would be possible to identify the vulnerable areas by applying the developed climate change vulnerability assessment index. The climate change vulnerability index could then be used as a valuable tool in setting climate change adaptation policies in the health care sector.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.34-47
• /
• 2009

Rapid urbanization is causing environmental and ecological damage, development thoughtless for the environment, and social and economical issues. It is important to grasp urban growth situations and characteristics, reflect them, and establish a policy for the solution of issues pursuant to urbanization and the sustainable and efficient development of national land. This research aims to be used as basic data in establishing an urban policy by analyzing the situations and characteristics of urban growth for the past 20 years in our entire country rather than an existing district. For this, some urban districts were sampled using a 1980s and 2000s version of land cover map produced by Ministry of Environment, and then pattern analysis for urban growth by administrative district ranks was conducted using GIS and a statistical technique. As a result, the development zone area after 1980s has increased by 2.5 times as compared to that before 1980s, and especially in the farm villages neighboring the national capital region, it has increased by 21.2 times. Special cities and metropolitan cities were developed at the districts being low in altitude, close to the principal road and the major downtown, high in road ratio, and restricted environmentally, ecologically and legally, and were diverted from mountains, forests and grassland to urban land. On the other hand, farm villages neighboring a large city, farm villages neighboring the national capital region, and local farm villages were developed at the districts being high in altitude, far from the principal road and the major downtown, low in road ratio, and not restricted environmentally, ecologically and legally, and were diverted from farmland to urban land. That is, it can be seen that urban development has been actively realized despite the unfavorable topographical conditions in the suburban districts due to lack of available land and various regulations and policies as urban growth around big cities expands.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.318-326
• /
• 2022

The Convention on Biodiversity (CBD) recommends that 17% of the land be designated as a protected area to counter global environmental problems. Korea also realized a need to designate protected areas according to the international level and explain the significance of designating protected areas. Accordingly, studies on ecosystem services are required. In Korea, the protected areas are designated as national parks, provincial parks, and county parks by hierarchy under the Natural Parks Act. However, as priority was on political and administrative aspects, research on ecosystem service value evaluation and habitat management were concentrated in national parks, and provincial and county parks were relatively neglected. Therefore, more studies on provincial and county parks are necessary. In this study, habitat quality for Gajisan Provincial Park, where there were few studies on habitat management and ecosystem service valuation, was evaluated using the InVEST Habitat Quality model among the InVEST models. The analysis results were compared with 16 mountainous national parks. The results showed that the habitat quality value of Gajisan Provincial Park was 0.83, higher than that of the surrounding areas. The analysis of habitat quality in three districts showed 0,84 for the Tongdosa and Naewonsa districts and 0.83 for the Seoknamsa district. By use district, the nature conservation district, the natural environment district, the cultural heritage district, and the park village district had the highest habitat quality value in that order. Compared with the existing habitat quality analysis results of national parks, Gajisan Provincial Park showed naturalness at the level of Mudeungsan National Park. These results can be used as objective data for establishing policies and management plans to preserve biodiversity and promote ecosystem services in provincial parks.

• Korean Security Journal
• /
• no.36
• /
• pp.177-200
• /
• 2013

As we enter a high industrial society that widens the gap between the rich and poor, demand for the security services has grown explosively. With the growth in quantitative expansion of security services, people have also placed increased requirements on more sophisticated and diversified security services. Consequently, market outlook for private security services industry is positive. However, Korea's private security services companies are experiencing difficulties in finding a direction to capture this new market opportunity due to their small sizes and lack of management-strategic thinking skills. Therefore, we intend to offer a direction of development for our private security services industry using a management-strategy theory and the Analytic Hierarchy Process(AHP), a structured decision-making method. A resource-based theory is one of the important management strategy theories. It explains that a company's overall performance is primarily determined by its competitive resources. Using this theory, we could analyze a company's unique resources and core competencies and set a strategic direction for the company accordingly. The usefulness and validity of this theory has been demonstrated as it has often been subject to empirical verification since 1990s. Based on this theory, we outlined a set of basic procedures to establish a management strategy for the private security services companies. We also used the AHP method to identify competitive resources, core competencies, and strategies from private security services companies in contrast with public companies. The AHP method is a technique that can be used in the decision making process by quantifying experts' knowledge and unstructured problems. This is a verified method that has been used in the management decision making in the corporate environment as well as for the various academic studies. In order to perform this method, we gathered data from 11 experts from academic, industrial, and research sectors and drew distinctive resources, competencies, and strategic direction for private security services companies vis-a-vis public organizations. Through this process, we came to the conclusion that private security services companies generally have intangible resources as their distinctive resources compared with public organization. Among those intangible resources, relational resources, customer information, and technologies were analyzed as important. In contrast, tangible resources such as equipment, funds, distribution channels are found to be relatively scarce. We also found the competencies in sales and marketing and new product development as core competencies. We chose a concentration strategy focusing on a particular market segment as a strategic direction considering these resources and competencies of private security services companies. A concentration strategy is the right fit for smaller companies as a strategy to allow them to focus all of their efforts on target customers in a single segment. Thus, private security services companies would face the important tasks such as developing a new market and appropriate products for such market segment and continuing marketing activities to manage their customers. Additionally, continuous recruitment is required to facilitate the effective use of human resources in order to strengthen their marketing competency in a long term.

• Journal of Intelligence and Information Systems
• /
• v.21 no.4
• /
• pp.17-35
• /
• 2015

Demand forecasting is the activity of estimating the quantity of a product or service that consumers will purchase for a certain period of time. Developing precise forecasting models are considered important since corporates can make strategic decisions on new markets based on future demand estimated by the models. Many studies have developed market growth curve models, such as Bass, Logistic, Gompertz models, which estimate future demand when a market is in its early stage. Among the models, Bass model, which explains the demand from two types of adopters, innovators and imitators, has been widely used in forecasting. Such models require sufficient demand observations to ensure qualified results. In the beginning of a new market, however, observations are not sufficient for the models to precisely estimate the market's future demand. For this reason, as an alternative, demands guessed from those of most adjacent markets are often used as references in such cases. Reference markets can be those whose products are developed with the same categorical technologies. A market's demand may be expected to have the similar pattern with that of a reference market in case the adoption pattern of a product in the market is determined mainly by the technology related to the product. However, such processes may not always ensure pleasing results because the similarity between markets depends on intuition and/or experience. There are two major drawbacks that human experts cannot effectively handle in this approach. One is the abundance of candidate reference markets to consider, and the other is the difficulty in calculating the similarity between markets. First, there can be too many markets to consider in selecting reference markets. Mostly, markets in the same category in an industrial hierarchy can be reference markets because they are usually based on the similar technologies. However, markets can be classified into different categories even if they are based on the same generic technologies. Therefore, markets in other categories also need to be considered as potential candidates. Next, even domain experts cannot consistently calculate the similarity between markets with their own qualitative standards. The inconsistency implies missing adjacent reference markets, which may lead to the imprecise estimation of future demand. Even though there are no missing reference markets, the new market's parameters can be hardly estimated from the reference markets without quantitative standards. For this reason, this study proposes a case-based expert system that helps experts overcome the drawbacks in discovering referential markets. First, this study proposes the use of Euclidean distance measure to calculate the similarity between markets. Based on their similarities, markets are grouped into clusters. Then, missing markets with the characteristics of the cluster are searched for. Potential candidate reference markets are extracted and recommended to users. After the iteration of these steps, definite reference markets are determined according to the user's selection among those candidates. Then, finally, the new market's parameters are estimated from the reference markets. For this procedure, two techniques are used in the model. One is clustering data mining technique, and the other content-based filtering of recommender systems. The proposed system implemented with those techniques can determine the most adjacent markets based on whether a user accepts candidate markets. Experiments were conducted to validate the usefulness of the system with five ICT experts involved. In the experiments, the experts were given the list of 16 ICT markets whose parameters to be estimated. For each of the markets, the experts estimated its parameters of growth curve models with intuition at first, and then with the system. The comparison of the experiments results show that the estimated parameters are closer when they use the system in comparison with the results when they guessed them without the system.