• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.324-331
• /
• 1995

0.36[wt%l $SiO_{2}$ and 0.1[wt%] $H_{3}$B $O_{3}$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO.5.7F $e_{2}$ $O_{3}$ to hinder grain growth and accelerate sintering, respectively. This experiment was carried out to investigate effect of particle size distribution as a function of milling time(20, 30, 40, 50, 60, 70 hours) on the magnetic properties of SrO.5.7F $e_{2}$ $O_{3}$ ferrite magnet. The B-H curve, density and the degree of orientation were measured. And the microstructure of ferrite magnets was examined with a SEM. The optimal conditions and properties of the typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_{r}$=4, 000[G], $_{b}$ $H_{c}$=3, 330[Oe], (BH)max=3.786[MGOe], $_{I}$ $H_{c}$=3, 525[Oe], density=5.0063[g/c $m^{3}$] and orientation factor f=0.813.0.813.3.3.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.931-939
• /
• 1998

Preparation of the hexagonal Sr-ferrite powsers with high performance by co-spraying precusor of the FeCl$_2$+SrCO$_3$ at a low temperature was proved as a cost =-effective method. The co-spray roasting was carried out in the temperature range of 300~$700^{\circ}C$ after SrCO$_3$ powders were mixed into 12FeCi$_2$.4$H_2O$ liquor. By this low temperature roasting method fine particles of multi-phased FeO$_2$+SrCO$_3$ were formulated. Powders calcined at 105$0^{\circ}C$ for 1 hour show the best magnetic property of M\ulcorner=69.96 emu/g, M\ulcorner=36.98 emu/g, and \ulcornerH\ulcorner=4.31 Oe. This calcining temperature is lower than that of the conventional dry method by 10$0^{\circ}C$.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.25-30
• /
• 1997

치환형 Ba-ferrite의 수소환원 거동은 순수한 Ba-ferrite와는 다르게 나타났다. 환원온도 250 .deg. C에서 520 .deg. C의 범위에서 치환형 Ba-ferrite의 보자력은 증가하다가 다시 감소하는 반면에 순수한 Ba-ferrite는 계속 감소 하였다. 치환형 Ba-ferrite의 환원과정은 환원되는 정도에 따라 3단계로 나뉘어진다. 1과 2단계에서 Ba-ferrite의 구조는 그대로 유지를 하지만 자기적 성질은 다르게 나타났다. 1단계에서 보자력은 증가하고 산화처리시 가역적이지만, 2단계에서는 보자력이 더욱 증가하고 산화처리시 비가역적이었다. 그러나 3단계에서는 Ba-ferrite 구조 자체가 붕괴되어 .alpha. -Fe와 소량의 BaFe $O_{3-x}$의 생성으로 $H_{c}$는 크게 감소하고 포화자화값은 130 emu/g으로 크게 증가하였다. 이 때 보자력 분포도는 크게 넓어지며 입자크기도 감소하였다. 또한 치환이온들은 환원과정에서 Ba-ferrite 구조의 붕괴를 억제하였으며, 2a + 4 $f_{IV}$ , 2b 및 12k 자리의 치환이온들이 4 $f_{VI}$ 와 12k'의 자리로 이동함을 확인하였다. 따라서 1과 2단계에서의 보자력 증가원인은 치환이온의 자리이동에 따른 고보자력 상의 생성 때문이었다.

• 한국세라믹학회지
• /
• 제13권3호
• /
• pp.13-20
• /
• 1976

The magnetic properties, especially the magnetostriction, of ferroxplana $Zn_{1-x}$$M_X$Y(x=0.0, 0.2, 0.4, 0.6) were investigated at room temperature. In general, the Curie temperature and the permeability of ferroxplana $Zn_{1-X}$$Mn_X$Y increased while the amount of the other phase decrease with increased concentration of dopant $Mn^{2+} for $Zn^{2+}. The magnetostriction constnats K1, K2, K3 and K4 for ZnY were ＋0.3, -5.0, -4.3 and $-4.8{\times}$$10^{-6} while that for 4Zn^0.8$ $Mn^0.2$Y were ＋2.5, -5.4, -6.0 and $-3.4{\times}10^{-6}$, respectively.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1140-1142
• /
• 1993

It has been prepared by a coprecipitation method for Ferroxplana $Ni_2Y\;(Ba_2Ni_2Fe_{12}O_{22}$ magnetic particles, which is one of the Hexagonal ferrite. The coprecipitates were synthesized by adding aqueous solution of $BaCl_2{\cdot}2H_2O,\;NiCl_2{\cdot}6H_2O\;and\;FeCl_2{\cdot}4H_2O$ (of which the mole ratio is $Ba^{2+}:Ni^{2+}:Fe^{2+}$=1:1:6) to a mixture of NaOH and $Na_2CO_3$ solution. The shape of Ferroxplana $Ni_2Y$ magnetic particles obtained at the calcined temperature 1,100($^{\circ}C$) was hexagonal plate-like, average particle size was 2(${\mu}m$), and aspect ratio was more than 7.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1023-1029
• /
• 2001

육방정 페라이트 $Co_2$Z(B $a_3$ $Co_2$F $e_{24}$ $O_{41}$ )를 여러 공침-산화 방법으로 제조하여 생성과정을 연구하였으며, 적절한 제조 방법을 결정하였다. 산화 및 공침 순서를 다르게 하여 $Ba^{2+}$, $Co^{2+}$, F $e^{2+}$ 등의 염화물 혼합 수용액으로부터 $Co_2$Z 조성의 수산화물을 제조하였다. 그리고 열처리 온도에 따른 생성상의 변화를 열분석(DTA/TGA), 분말 X-선 회절분석, 주사전자현미경 등을 이용하여 관찰하였다. $Co_2$Z 상은 출발물질이 비정질에 가까운 산수산화철($\delta$-FeOOH)일 경우에만 관찰되었으며, $Ba_3$F $e_{32}$ $O_{51}$ , BaF $e_{12}$ $O_{19}$ (M형), $Ba_2$ $Co_2$F $e_{12}$ $O_{22}$ (Y형)로부터 생성되었다. 염화물 혼합 수용액을 산화시킨 다음 침전하여 합성한 공침물은 110$0^{\circ}C$부터 $Co_2$Z가 생성되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.205-208
• /
• 1999

We have studied properties(crystal structure, density, absorption, contraction, initial permeability, and permeability) of Ba$\sub$0.2/Me$\sub$0.31/Fe$\sub$0.49/(Me:Ni$\sub$1-x/, Cu$\sub$x/ x=0~1) ferrites with various Me site, because of development of magnetic materials for inductor. As a results of the density, absorption rate, and shrinkage rate, the sintering temperature of Ba$\sub$0.2/ Me$\sub$0.31/ FEesub 0.49/(Me:Ni$\sub$1-x/ x=0.25, 0.75) had got over 1100$^{\circ}C$ for 3 hours. According to SEM images, the configurations of grain were hexagonal, Increasing the sintering temperature, initial Permeability increased. The complex permeabilities as a function of for several MHz showed constants.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1165-1166
• /
• 2006

An experiment was carried out to investigate the effect of Ba Stearate as a reducing agent on the magnetic and physical properties of anisotropic $BaFe_2-W$ type ferrite magnets. It was found that the magnetic properties of $BaO{\cdot}8.5Fe_2O_3$ were improved by adding 0.3 wt% of Ba Stearate, 0.5 wt% of $SiO_2$, and 0.5 wt% of CaO together. The optimum conditions for making magnets were as follows; semisintering condition: $1350^{\circ}C{\times}4.0$ h in nitrogen gas atmosphere, drying condition: $180^{\circ}C{\times}2.0$ h in air, sintering condition: $1160^{\circ}C{\times}1.5$ h in nitrogen gas atmosphere. Magnetic and physical properties of a typical sample were $J_m$ = 0.46 T, $J_r$ = 0.43 T, $H_{cJ}$ = 182.3 kA/m, $H_{cB}$ = 177.2 kA/m, $(BH)_{max}$ = 33.8 kJ/$m^3$, $T_C$ = $495^{\circ}C$ and $K_A$ = $2.65{\times}10^5\;J/m^3$ and $H_A$ = 1332 kA/m.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.17-22
• /
• 1999

육방구조의 M형 BaFe12O19를 NaCl를 첨가한 경우와 첨가하지 않은 경우에 질소가스 분위기와 공기 중에서 여러 온도로 가열하여 고상반응법으로 제조하였다. X-선 회절법과 Mossbauer분광법에 의하여 BaFe12O19상과 $\alpha$-Fe2O3상의 공존 정도를 알아냈다. 동일한 조건에서 NaCl를 첨가한 경우가 NaCl를 첨가하지 않은 경우 보다 $\alpha$-Fe2O3상이 적음을 확인하였다.