• Journal of the Korean Ceramic Society
• /
• v.26 no.6
• /
• pp.737-746
• /
• 1989

After Ba-ferrite powders synthesized hydrothermally and its heated powders were dissolved partially with HCl treatment time, the BaO/Fe2O3 mole ratio of dissolved solutions and powders were measured by AAS, also, lattice constants, particle morphology and magnetic properties in HCl treated, heated and no-heated Ba-ferrite powders were abtained by means of XRD, SEM and VSM, respectively. From above analysis results, the effect of Ba/Fe mole ration in suspension(as starting material) on the BaO/Fe2O3 composition and particle characteristics of products were investigated, and the effect of heat treatment on magnetic properties of products examined. The composition, lattice constant and crystal phase of products depend on the Ba/Fe mole ratio in suspension. Ba content in surface or outer part of Ba-ferrite powder is higher than inner and heterogeneous, and the excess Ba ions in the inner part of particle move into the outer by heating, so that the mole ratio of BaO/Fe2O3 in the more jinner approaches more to the stoichiometric composition 1 : 6. The crystallinity, coercivity and saturation magnetization of products are increased by heat treatment, and the heat-treated samples synthesized hydrothermally in lower temperature are appreciated to have better powder characteristics.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.1
• /
• pp.95-105
• /
• 2007

A mathematical modeling for the drying process of hygroscopic porous media, such as wood, has been developed in the past decades. The governing equations for wood drying consist of three conservation equations with respect to the three state variables, moisture content, temperature and air density. They are involving simultaneous, highly coupled heat and mass transfer phenomena. In recent, the equations were extended to account for material heterogeneity through the density of the wood and via the density variation of the material process, capillary pressure, absolute permeability, bound water diffusivity and effective thermal conductivity. In this paper, we investigate the drying behavior for the three primary variables of the drying process in terms of control volume finite element method to the heterogeneous transport model on one-dimensional grid.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2015

Globalization, unpredictable markets, increased products customization and frequent changes in products, production technologies and machining systems have become a complexity in today's manufacturing environment. One key strategy for coping with the evolution of this situation is to develop or apply an enable technology such as intelligent manufacturing. Intelligent manufacturing system (IMS) is characterized by decentralized, distributed, networked compositions of heterogeneous and autonomous systems. The model of IMS is inherited from the organization of the living systems in biology and nature so that the manufacturing system has the advanced characteristics inspired from biology such as self-adaptation, self-diagnosis, and selfhealing. To prove this concept, an innovative system with applying the advanced information and communication technology such as internet of things, cognitive agent are proposed to integrate, organize and allocate the machining resources. Innovative system is essential for modern machining system to flexibly and quickly adapt to new challenges of manufacturing environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.110-117
• /
• 2012

A product family design has received much attention over the last several decades, since a product family-based development shortens lead-times and reduces cost, as well as increases efficiency and effectiveness of the product realization process. It is challenging work, however, to define the product family design in the heterogeneous product development environments, due to myriads of products related information described in different ways across products in any companies. In this paper, we provided a way of defining product family design framework using formal concept analysis and ontology language. Based on this, the specific product family can be derived by ontological reasoning, and the new product concept can be also expanded in the framework. The proposed framework is formalized using OWL (Web Ontology Language) and implemented in $Prot{\acute{e}}g{\acute{e}}$. Actual product family design algorithm is carried out using FaCT++ engine, a plug-in to $Prot{\acute{e}}g{\acute{e}}$, and the benefits of the proposed method are also demonstrated through a case study.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2311-2315
• /
• 2011

Alumina supported polyphosphoric acid (PPA/$Al_2O_3$) was successfully prepared by impregnation of alumina support by polyphosphoric acid and characterized using FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques. The catalytic behavior of this new solid acid supported heterogeneous catalyst was checked in the synthesis of 14-aryl-14H-dibenzo[a, j]xanthenes by cyclocondensation reaction of ${\beta}$-naphthol and aryl aldehydes under solvent-free conditions. The results showed that the novel catalyst has high activity and the desired products were obtained in very short reaction times with high yields. Moreover, the catalyst can be easily recovered by filtration and reused at least three times with only slight reduction in its catalytic activity.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2618-2626
• /
• 2010

In this paper poly (4-methyl vinylpyridinium hydroxide)/SBA-15 composite was prepared as a highly efficient heterogeneous basic catalyst by in situ polymerization method for the first time. It was characterized by XRD, FT-IR, BET, TGA, SEM and back titration using NaOH. This catalyst exhibited the excellent catalytic activities for the Knoevenagel condensation of various aldehydes with ethyl cyanoacetate. Over this catalyst, ${\alpha},{\beta}$-unsaturated carbonyl compounds were obtained in the reasonable yield at $95^{\circ}C$ in 10 - 30 min in $H_2O$ as a solvent with a 100% selectivity to the condensation products. Catalyst could be easily recycled after the reaction and it could be reused without the significant loss of activity/selectivity performance. No by-product formation, high yields, short reaction times, mild reaction conditions and operational simplicity with reusability of the catalyst were the salient features of the present synthetic protocol. Presence of $H_2O$ as a solvent was also recognized as a "green method".

• Korean Management Science Review
• /
• v.34 no.2
• /
• pp.15-33
• /
• 2017

This paper considers a Bayesian Network analysis for understanding the heterogeneous cross-category effects of different promotion activities and developing an efficient overall promotion strategy for a large retail store. More specifically we differentiate price reduction promotion and floor promotion and study their heterogeneous effect on consumer purchase behavior under a market basket setting. We then utilize Bayesian networks in identifying complex association structure in market basket dataset by analyzing the effects of different promotional activities and also include the effects of time, family income and size. We find from our Bayesian network analysis that the dominant cross-category promotion effect of price promotion is the indirect effect whereas the dominant cross-category promotion effect of floor promotion is the direct effect. Also, among the demographic variables we find that family size of the household is linked with more product categories compared to income and see that there are differences in the extent of the effects by product category. Finally, we also show the existence of products acting as a network hub and how they can be utilized by retailers faced with a limited marketing budget and suggest a more efficient promotion strategy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2018

In this paper, we propose smart digital door lock system using heterogeneous communication. This system has efficient function using RF communication and Internet communication, and realizes access and real image of the passengers by combining camera control technology to secure original competitiveness with existing products. It uses the Internet of things and receive images to and from your smart-phone. And senses human behavior. In the simulated results, the image transmission rate of 90 % or more and the time required to transmit 10,000 images have an average transmission speed of 3 seconds. It is expected to secure competitiveness to increase the security of door lock in the future by enabling minimum security and fire monitoring service in real time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1256-1265
• /
• 2019

The aim of this review is to show the evolution of the dairy goat sector in Europe from all perspectives. Starting from the current situation, the challenges and future potential of this livestock system are presented, as well as strategies to overcome the difficulties faced. Europe holds 1.9% of the world goat population and produces 15.1% of goat milk recorded worldwide. The goat species plays a fundamental economic, social and environmental role in many regions of Europe. The wide diversity of production systems and autochthonous breeds makes the sector very heterogeneous. In order to improve viability, a number of strategies need to be adopted to solve the current problems such as a low profitability, absence of generational change and a little or no recognition of the social and environmental role of the sector. Some strategies to improve the situation of the European goat sector include: i) generating market value that will recognise the diversity of the dairy goat sector (breeds, feeding models, derived products${\ldots}$); ii) promoting and raising awareness of the functional attributes of goat milk and derived products so as to increase consumption; iii) assigning an economic value to environmental and social functions; iv) improving working conditions through technological innovation to make goat farming more attractive to young people; and v) processing more milk into cheese or other dairy products in production areas.