• Korean Journal of Crystallography
• /
• v.1 no.2
• /
• pp.115-125
• /
• 1990

We have investigated bulk and hetero-epitaxial growth of GaAs single crystal. Various growth techniques such as HB, HZM, and VGF for high quality bulk GaAs were successfully developed by appling the specially designed DM(direct monitoring) furnace. Al GaAs/GaAs superlattice structure and In(x)Ga(1-x) As/GaAs epilayers were also grown by MOCVD and VPE, respectively. The characterization of GaAs single crystals and epilayers was made by X-ray diffraction, Hall effect, PL, chemical etching and angle lapping technique.

• Korean Journal of Materials Research
• /
• v.14 no.10
• /
• pp.731-736
• /
• 2004

Herein, we report on the co-firing of a low-K wiring substrate and a middle-K functional substrate in LTCC. Firstly, we researched the sintering behavior and dielectric properties of the low-k wiring substrate comprised by alumina and glass frit with ${\varepsilon}_r$, of $\sim7$ and the middle-k functional substrate comprised by $Ba_{5}Nb_{4}O_{15}$ and glass frit with ${\varepsilon}_r$, of $20\sim30$. The warpage and delamination between the hetero layers of the low-K and the middle-K composition were also studied. In particular, physical matching of the hetero layers could be possible by adjusting of the sintering properties of the composition. We observed that an introduction of the glass frit to the low- and middle-K substrate gives rise to a minimization of an effect given by separation of the hetero layers, and modification of the fraction of the glass frit accompanied by a variation of the composition could control the sintering behavior and its beginning temperature. In the case of co-firing of the L03 as the low-K wiring substrate composition and the M03 as the middle-K functional substrate composition at $875^{\circ}C$, we could fabricate a desirable structure of hetero layers without any kinds of structural defects such as separation, warpage, delamination, pore trap, etc. We suppose that the co-firing techniques described in this study would provide a helpful method to fabricate a LTCC multi-functional for the next generation.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.710-714
• /
• 1998

Organic electroluminescence devices (ELD) with hetero-junction structure were fabricated utilizing poly(p-phenylne vinylene) (PPV) as emitting layer and electron transport layer (ETL). 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) was used as an electron transport agent. Copolymers with stilbene type comonomers, such as poly(styrene-co-PVTS), poly(styrene-co-MeO-PVTS) and poly(styrene-co-MeO-ST) were synthesized to be used as a matrix polymer to disperse electron transport agent (PBD). Among the hetero-junction EL devices fabricated with the above materials, the device with poly(styrene-co-PVTS) as matrix polymer for ETL gave the highest luminance ($120.7cd/m^2$, 13 V). EL devices made with poly(styrene-co-MeO-PVTS) or poly(styrene-co-MeO-ST) matrix exhibited lower luminance than the one with polystyrene matrix and the single layer EL (ITO/PPV/Mg) device.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2010

In this paper, we propose the structure of heterogeneous multiprocessor's concept, which is the structure of the new type of the robot controller, and we introduce an integrating structure method, which is distributed multiprocessor within controller using sRIO. We also perform the computer simulation with using the sRIO IP core which was designed within FPGA as the method for implementation of integrated heterogeneous multiprocessor by sRIO communication. Thus, we verify the result.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.394-403
• /
• 1994

Chaos characteristics of laser diodes with external optical feedback is investigated. For a FabryPerot resonator laser, optical feedback by external mirror is assumed. The simulation is performed in such a way that a current of $1.3J_{th}$ is injected into the $1.3{\mu}m$wavelength "InGaAsP" buried hetero structure laser. With the increment of K, the system shows the evolution of four steps as follows: i) When the optical feedback coefficient K is very small, the relaxation oscillation is damped and the system reaches the steady state showing the stable operation characteristics. ii) As K increases a little bit, the relaxation oscillation is not damped any more and the system begins to maintain the periodic oscillation. iii) When K is increased further, the oscillation shows the larger amplitude and the long periodic length. iv) When K is increased very large, the system gets unstable and enters into the coherejlce collapse state. state.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.33-37
• /
• 1997

The optical properties of (1210) GaN epitaxy films grown on the (1012) $\alpha-A1_2O_3$ substrates have been studied. The hetero-epitaxy films were grown by the halide vapor phase epitaxy (HVPE) method using $Ga/HC1/NH_3/He$ system at $990^{\circ}C$. XRD, RHEED and SEM are used for the identification of the hetero-epitaxy films structure and surface morphology. The confirmed (1210) GaN epitaxy films were characterized by PL and Raman. By the Raman scattering, the active phonon modes of single-phase GaN films are varied with the arrangement of both polarization and propagation directions of laser beam with reference to the axis in single-phase crystal films. The Y(Z, Y & Z) X geometry allows scattering pat-terns of $A_1(TO)=533\;cm^{-1},\;E_1(TO)=559\;cm^{-1}\;and\;E_2=568 cm^{-1}$ modes, whereas in the Z(Y, Y & Z) X geometry the only $E_2$ mode are observed.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.95-99
• /
• 2000

A series of hetero ring (X) substitued chalcone derivatives with farnesyl protein transferase (FPTase) inhibition activities $(pI_{50})$ values determined in vitro is analyzed by modified Free-Wilson (F-W) and Hansch method for quantitative structure activity relationship (QSARs). On the basis of F-W analysis on the FPTase inhibitory activity of a training set of the compounds, none of the (X)-substituents were not contribute the activity. But the net charge of ${\alpha}$ carbon atom is contribute the activity than that of ${\beta}$ carbon atom. And the relative orders of the (Y)-substituents on the activity are ortho>meta>para-substituents. According to Hansch approach, the activities would depend largely on the optimal, $(R_{opt.}=-0.35)$ resonance effect with ortho substituted $(I_o>0)$ electron donating group (R<0) and STERIMOL parameter, $B_1$ constant. The inhibition activity between hetro ring substituents have been a proportioned with each others and none substituent(H), 45 showed the highest FPTase inhibition $(pI_{50}=4.30)$ activity.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.257-264
• /
• 1998

5-Methylthebaine was obtained by treating thebaine with n-butyllithium and methylfluorosulfonate. Hetero Diels-Alder reaction of thebaine and 5-methylthebaine with trifluoroacet aldehyde afforded 14-${\beta}$-(triflu-oro-2-hydroxyethyl)codeine (2) and 14-${\beta}$-(trifluoro-2-hydroxyethyl)-5-methylcodeinone (9). 6-${\alpha}$-OH compound (4) was obtained by employing $CeCl_2$ and $NaBH_4$. After synthesized a derivative substituted for 3-OH (5), using boron tribromied, We synthesized a new derivative that make double bond in C-7, C-8 into epoxode (6), (10). Through inspecting an influence on structure-activity and analgetic action, we are going to examine which opiold acceptor has a selectivity.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.13 no.1
• /
• pp.73-91
• /
• 1995

Spectroscopic and Photoelectric Characteristics in the Cyanine and Merocyanine Dye according to systematically change of their structures were experimentally discussed. As result, in solution, Hetero atoms(X) of Cyanine and Merocyanine dye were participated in resonance X of d obital rather than X of pobital,effected in resonance and contributed in extension of conjugated system. in solid film,new spectra,called eximer-fluorenscence,were appeared in 3-dimensional fluorenscence of high density of Cyanine dye but not of Merocyanine. The activational energy of conductivity in Merocyanine dye was lower than in cyanine, an the contrary,the drift mobility was higher and the former in photoelectric characteristics was more effec-tive than the latter. In this paper,authors invertigated the changes of dye structure by molecular obital method to confirm the results of spectroscopic and photoelectric characteristics in the Cyanine and Merocyanine Dye acco-rding to systematically cally change of their structure, and counted total energy on dihedral angle and dipol miments if dyes in S0 and S1.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3425-3428
• /
• 2011

Apolipoprotein A-I (Apo A-I) is a major component for high density lipoproteins (HDL). A number of mimetic peptides of Apo A-I were screened from the phase-displayed random peptide library by utilizing monoclonal antibodies (A12). Mimetic peptide for A12 epitope against Apo A-I was selected as CPFARLPVEHHDVVGL (pA1). From the BLAST search, the mimetic peptide pA1 had 40% homology with Apo A-I. As a result of the structural determination of this mimotope using homo/hetero nuclear 2D-NMR techniques and NMR-based distance geometry (DG)/molecular dynamic (MD) computations, DG structure had low penalty value of 0.3-0.7 ${\AA}^2$ and the total RMSD was 0.6-1.6 ${\AA}$. The mimotope pA1 exhibited characteristic conformation including a ${\beta}$-turn from Pro[7] to His[11].