• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.97-103
• /
• 2008

In general, the strength of gears is calculated using the formula of AGMA or JGMA. But these formula can not be applied directly to the strength calculation of the rack and pinion of steering gear assay, because of complex tooth and contact shapes. So Lewis bending stress and Hertzian contact stress formula are generally used for the design of rack and pinion of steering gear assay. But these formula do not also give the exact stress of rack and pinion. In this paper, comparing the finite element analysis results and the experimentally measured values, it is shown that the finite element modeling technique of the rack and pinion of steering assay is reasonable.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1343-1350
• /
• 1998

A study is made of mechanical properties of unglazed matrix as a funtion of sintering temperature and crack patterns in layer structur pottery consisting of glaze and substrate and in matrix which is sintered at 120$0^{\circ}C$ and 130$0^{\circ}C$ respectively. The mechanical properties of matrix are increased due to density and vitrification to 130$0^{\circ}C$ The interface of glazed bilayer reveals the reactive intermediate layer. Herzian indentation testing is used to investigate the evolution of damage modes as a function of load. In the materials sintered at 120$0^{\circ}C$ quasi-plastic deformation is developed at the matrix and the cone-like cracks initiate at the glazing top surface and additionally upward-extending transverse cracks initiate at the internal in-just initiate at the glazing top surface which pass through the interface with increasing of indentation load. Finally the dominant damage mode shifts from substrate quasi-plasticity to coating fracture with increasing sintering temperature.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1257-1265
• /
• 1998

Hertzian contact tests were used to investigate the evolution of fracturedamage in the coating layer as functions of contact load and coating thickness by studying crack patterns in porcelain on glass-infiltrated alumina bilayer system conceived to simulate the crown structure of a tooth. Cone cracks initiated at the coating top surface without delamination at interface and crack propagation to substrate. Preferentially the cracks made multi-cracks at the coating top surface rather than proceeding to interface. The cracks were highly stabilized with wide ranges between the loads to initiate first cracking and to cause final failure im-plying damage-tolerant capability. Finite element modelling was used to evaluate the stress distribution. Maximum tensile stress were responsible for the cracking at the coating layer and had a profound influence on the crack pattern and fracture damage in the layered structure materials.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.909-914
• /
• 2000

반응금속 침투법으로 제조한 $Al_2$O$_3$/Al 복합체의 파괴특성과 손상 내구성을 침투방향성에 따라 관찰하였으며, 복합체는 $Al_2$O$_3$단일상보다 향상된 파괴인성과 Al 단일상보다 높은 경도값을 나타내었다. Vickers 압입법을 사용한 복합체의 손상형태에서는 침투방향에 따른 각각의 미세구조에 의해 상이한 특성을 나타내었으며, 헤르찌안 압입법을 사용한 복합체의 손상거동은 $Al_2$O$_3$과 Al의 중간거동을 나타내었다. 헤르찌안 압입 후 강도저하시험으로 복합체가 갖는 우수한 결함저항성을 관찰할 수 있었으며, 높은 헤르찌안 하중에서는 복합체의 강도저하 특성이 복합체의 미세구조에 의존함을 관찰할 수 있었다. 이와 함께 복합체에서의 반응금속 침투방향성, 미세구조 그리고 손상 내구성 사이 상호연관성에 대해 논의하였다.

• 한국콘텐츠학회논문지
• /
• 제4권2호
• /
• pp.28-35
• /
• 2004

안테나 복사 특성을 효율적으로 측정할 수 있는 근역장측정 방법의 개선을 논한다. 본 논문에서 직각좌표계에 바탕을 둔 원통주사법의 공식을 제안한다. 제안된 원통주사법 알고리즘을 미소 쌍극자 안테나의 정확한 해와 비교한다. 본 논문의 접근법이 대부분의 안테나 측정에 효과적임을 수치해석 결과에서 알 수 있다.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.184-188
• /
• 2006

In recent years the flying height of the head/slider has been decreasing in order to increase the recording density of hard disk drive (HDD). Accordingly, it was predicted that direct contact between slider and disk surface (slider slap) can cause defects on the disk such as scratch and particle generation. In this work, we theoretically demonstrate the effect of rounded-edge slider using Hertzian contact theory. Depth and width of scratch were predicted by plowing model. Furthermore, as we fabricated rounded-edge slider, rounded-edge slider was tested and compared with sharp-edge slider. The experimental results show rounded-edge was effective for reducing scratch depth.

• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.22-27
• /
• 1998

The effect of the $\alpha$/$\beta$ phase fraction on the mechanical properties in silicon nitrides was investigated in part 1. In part II, we describe the role of microstructure on the mechanical properties and contact damage of silicon nitrides with coarse/equiaxed and coarse/elongated microstructures. Grain sizes and shapes were controlled by starting powder. Hertzian indentation using spherical indenter was also used to investigate contact damage behavior. Cone cracks from the spherical indentation were suppressed when the silicon nitride contains coarse and elongated grains. Coarse and elongated grains played an important role of cone crack suppression. The size of quasi-plastic zone does not depend on grain size or shape but depends on the fraction of $\alpha$/$\beta$ phase. A quasi-plastic zone was consisting of microcracks by shear stress during indentation.

• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.639-647
• /
• 2002

The nonlinear vibration of the thin perforated plate is analyzed in consideration of the V-shaped tension distribution and the effect of wire impact damping. The reduced order FEM model of the tension plate is obtained from dynamic condensation for the mass and stiffness matrices. Tension wire is modeled using the lumped parameter method to effectively describe its contact interactions with the plate. The nonlinear contact-impact model is composed of spring and damper elements, of which parameters are determined from the Hertzian contact theory and the restitution coefficient, respectively. From the evaluation of the computational accuracy and computation time for the deduced impact stiffness and damping coefficient, we determined proper values for the simulation works, accounting for the computational accuracy as well as the computational efficiency. Finally we discussed the results of nonlinear nitration analysis for variations of their design parameters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.307-314
• /
• 1998

In this paper, a numerical method for analyzing the interactions between train and track is presented. The effect of track irregularity on high speed running trains and track is examined by parametric studies. Two types of vertical track irregularity are considered. The first one is ideally assumed to a sine wave to investigate train and track behaviors with the change of its shape feasibly, The second one is artificially generated from PSD of track irregularity which was established from the measured data on real railways. In the track dynamic model, rail is considered to have a distributed mass and to be supported discretely at sleepers above ballast divided into three layers. Then, the contact between wheel and rail is modeled by a nonlinear Hertzian spring.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.572-579
• /
• 1998

In this paper, an analytical model for analyzing the interaction between train and floating slab track is presented. Train is modelled by 4-lumped masses system which are composed of a carbody supported by secondary suspension, a bogie frame supported by primary suspension, and two wheelsets supported by nonlinear Hertzian springs. In the track model, rail is considered to have a distributed mass and to be supported discretely at sleepers above ballast on slab. The slab supported by discrete isolators put on fixed floor is modelled by finite beam elements. Numerical analyses are carried out to examine anti-vibration effect of the GERB slab track which is same type laid in Puchon station on the subway No. 7 Line.