• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• Journal of the Korean Dietetic Association
• /
• v.8 no.3
• /
• pp.269-279
• /
• 2002

To investigate the change of perception after weight management education in elementary, middle and high school students, a survey was conducted. Same questionnaire was administered twice, before and after weight management education, to 426 students at 9 schools in Seoul area. The mean height, weight and body mass index were 145.5$\pm$8.0cm, 40.0$\pm$8.3kg, 18.6$\pm$3.0 for elementary school students, 160.1$\pm$5.2cm, 50.2$\pm$7.3kg, 19.5$\pm$2.4 for middle school students, and 162.2$\pm$5.0cm, 52.2$\pm$6.4kg, 19.8$\pm$2.3 for high school students, respectively. Before education, their preferred weight and perceived healthy weight was 35.4kg and 37.0kg among elementary school students, 44.8kg and 46.5kg among middle school students, and 47.3kg and 48.9kg among high school students, respectively. Differences between their present body weight and their preferred weight and/or perceived healthy weight appeared to be 4.5kg and 2.9kg in elementary school students, 5.6kg and 4.0kg in middle school students, and 5.1kg and 3.3kg in high school students, respectively. After administering education, the differences decreased to 2.5kg and -0.2kg in elementary school students, 4.2kg and 2.7kg in middle school students, and 4.3kg and 2.0kg in high school students, respectively (p<0.01). And their perception on own body shape was investigated using 5 point scale ('too lean' to 'too fat', 1 to 5) before and after education. The mean values changed from 3.1 to 2.8 in elementary school students, from 3.3 to 3.0 in middle school students, and from 3.4 to 3.2 in high school students (p<0.01). Their satisfaction with own body weight was monitored using 5 point scale ('very satisfied' to 'very unsatisfied', 1 to 5), also. The mean values changed from 3.0 to 2.7 in elementary school students, from 3.6 to 3.2, in middle school students, and from 3.8 to 3.4 in high school students (p<0.01). In the evaluation of their nutrition knowledge about weight control using 10 item quiz, before and after education, the mean quiz score was changed from 6.3 to 7.0 in elementary school students, from 7.0 to 7.9 in middle school students, and from 7.5 to 8.1 in high school students (p<0.01). In summary, nutrition education on weight management improved the subject's perception on perceived healthy weight and own body shape, and satisfaction with present body weight. This result suggests that nutrition education program should incorporate strategies to change incorrect beliefs and knowledge regarding weight control. Onto this, weight control education for students should start from their early age, be repeated periodically and consistently, and focus on the harmful effects of excessive weight loss and information on the practical and scientific ways of weight management.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.644-651
• /
• 2005

Dietary supplement mainly made of herb and fiber was examined whether it could reduce body weight and fat, modify blood lipid concentrations and bowel habits in 30 collegians without intentional diet restriction or lifestyle change for 5 weeks. Free-living subjects were required to take diet pills 2 times daily 30 minutes before meals. Before the study began, 24 hr recall diet record and the questionnaires had been collected. Anthropometric measurements (height, weight, waist and hip circumferences, triceps and abdomen skinfold thickness, and body fat) were performed and blood samples were withdrawn before and after the study. Blood lipid fractions analyzed were total cholesterol (TC), triglyceride (TG), HDL-cholesterol and LDL-cholesterol. After the trial, body weight, body mass index, and percent ideal body weight of the subjects were reduced to mean of 0.5 kg, 0.2 and $0.9\%$, respectively (p<0.05). Percent body fat, triceps and abdomen skinfold thickness, and waist and hip circumferences were all reduced significantly except for $\%$ abdominal fat, but $\%$ body muscle mass increased from $36.5\%$ to $37.4\%$ (p=0.000). TC and TG were remarkably diminished (p<0.01) and LDL-cholesterol tended to decrease, but no change was observed in HDL-cholesterol. Bowel movements were also increased (p<0.01). In conclusion, this specific herb and fiber-rich dietary supplement reduced body weight and body fat indices, improved anthropometric indices, modified blood lipid fractions and bowel movement desirably. The study suggest that herb and fiber-rich dietary supplement might help control body weight, body fat loss and adult diseases positively.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.5
• /
• pp.352-363
• /
• 2002

The purpose of this study was to analyze health-related habits, weight control experience and body composition of 344 female students visiting nutrition counselling office. Dietary habits of the subjects were assessed by means of interview with questionnaire and nutrient intakes were evaluated by the simple dietary assessment method. Weight and height were measured to get body mass index(BMI) and waist-hip ratio and their body composition were measured by Inbody 3.0. The obtained results were as follows: 1) Among students, 14.5% were exercising on a regularly basis, of which the exercises were walking and gymnastic exercise(22.1%), jogging(14.1%), and rope-skipping(4.7%), 48.4% of students were little drinking and 30.5% were once a week and smokers were 4.1%. 2) 28.3% of students were little having breakfast and 15.1% were once or twice a week. Two third of total students were not having breakfast regularly. Also only 59.6% of students were having dinner everyday, which means many of them were even skipping dinner. The reasons why they were not having breakfast were because they don't have enough time to eat(66.0%) and for a diet(2.8%) and the reasons for skipping dinner were because they were not hungry(23.0%), for the weight loss(18.2%). It was shown that they would skip dinner rather than breakfast for a weight control. 51.6% of students were taking snack 1~2 times a day and 5.3% were having little snack. 55.4% of students were dining out once a day and 15.4% more am 2 times a day. 3) 46.7% of students were already experiencing weight control before visiting the counselling office. 78.5% of students tried on one kind of weight control method, 11.4% on two kinds, and 10.1 % on more than three kinds. The method they tried for a weight control most was the one food diet using egg, fruits and beans, which is the most popular among them, and the next were an aerobic exercise(23.6%). a diet tried by a famous entertainer (15.5%), and the fasting(14.5%). 4) The average BMI was 21.2 and the body fat rate was 28.1%. As a result of grouping BMI, 12.8% were underweight 67.6% normal weight 11.6% overweight and 8% obesity. Less than standard for the body fat rate were 0.6%, 50.6% standard, 48.5% more than standard. 49.2% of students as normal weight on a BMI were assessed the so-called "skinny obesity. 50% of consulted students situated fat intra-abdominally at the umbilical level(WHR>0.8). 5) The energy intake was 76.6$\pm$17.8% of RDA and constituent ratio of carbohydrate, fat and protein were 64.2$\pm$5.2%, 21.6$\pm$3.7% and 14.3$\pm$2.3%, respectively, which is little over of 20% of recommended ratio of fat. Protein and niacin intake were more than 90% of RDA and riboflavin and vit. C were taken more than 100% of RDA. But Fe intake was 69.4$\pm$19.3%, Ca 76.6$\pm$23.6%, which were the least constituents. There was not remarkable significance between energy intake and nutrient density based on the groups of underweight, normal weight, overweight and obesity of BMI. 6) It was shown that body fat rate had remarkably significant correlation(p<0.000) with BMI(r=0.760) and WHR(r=0.817) respectively, but body fat rate was more correlated with WHR than with BMI. There was not much significant difference between body fat rate and WHR whether they exercised or not. However. BMI was significantly higher in the exercise group because one who showed higher BMI started to exercise since they looked fat in appearance and perceived as they were fat. fat.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.383-391
• /
• 2010

This study was performed to investigate the food habits, eating behaviors, perception of body shape, statuses of body weight control by BMI (Body Mass Index) of 732 middle school students in Gwangju and Jeonnam. The results of this study were compared among under weight (UW), normal weight (NW), and overweight (OW) groups according to BMI levels. In the OW group, female students had low scores in eating at night only, while male students had low scores in eating at night, eating speed, and food selection. All subjects wanted more height than measured. Only male students in the UW group wanted weight loss, whereas female students in the OW and NW groups did. Higher BMI in female students resulted in more weight difference between measured and wanted. All subjects responded properly themselves in perception of body shape but the OW groups showed a big difference between their present weight and wanted weights. Higher BMI in all students corresponded to more interest in concern and experience of weight management. In the male students, the reason for weight management showed high tendency in being healthy, whereas the female students had high tendency in having a slender figure. Higher BMI in all students corresponded to bigger difference between wanted and perceived body shape. In contrast, lower BMI in all students meant more stress. Greater difference between wanted and measured weight and greater difference between wanted and perceived body shape corresponded to less satisfaction in body shape. In conclusion, compared to the NW and UW groups, the OW group had overeating habits highly linked to stress. Also the OW group didn't have desirable eating behaviors and attitudes because of their greater interest in concern and experience of weight control and stress accumulation, and finally there was difference in food habits and behaviors according to the BMI level. Therefore these results suggest that effective nutritional programs should be developed including correct body image and good dietary habits.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.455-461
• /
• 2007

This research was processed on morphological and physical characteristics of 'Yongdong' cultivar nuts. (1)Morphological properties of 'Yongdong' cultivar nuts were significantly different from the control, native species, in respect of all properties. (2) 'Yongdong' cultivar nuts showed higher figures than the native species on 9 items of morphological properties (kernel weight, size, length and width of pad on suture and etc.), whereas other 6 items (height of pad on suture, thickness of shell and septem, fragment numbers of isolated kernel, roundness index, and etc.) showed lower figures than those of the control. (3) In physical properties of the nut shells, 'Yongdong' cultivar was superior to the control at all items with the exception of compressive prove distance. Accordingly, it was also verified as effective cultivar of shelled walnut with suture line direction applied the minimum strength. (4) 'Yongdong' cultivar, 21.9 kg, was approximately twice lower than the control, 42.6 kg, on maximum compressive weight. It was demonstrated that the 'Yongdong' cultivar characterized by easily crushing shell by small strength was great in cracking properties. (5) On the study of yield strength, the native species being twice higher than 'Yongdong' cultivar showed the properties of the small elasticity and the shell hardness. While, the suture line of 'Yongdong' cultivar having the lowest yield strength 15.6 kg and 16.0 kg was identified the shell crushed easily. (6) The movement distance of the compressive prove of 'Yongdong' cultivar, 4.2 mm, was longer than that of the control, 2.7 mm. Subsequently, it means that the amount of loss possibly occurring to distribution process was not great, whereby productive value was high. (7) The compressive strength of the suture line of 'Yongdong' cultivar, $9.1kg/cm^2$, was much lower than total average of that $12.4kg/cm^2$. It was also statistically different with other properties. (8)The hardness examination by the compressive position revealed that the suture line of 'Yongdong' cultivar, $149.8kg/cm^2$, was lowest in contrast with the control, $300.9kg/cm^2$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1358-1365
• /
• 2017

This study evaluated the quality characteristics of muffins prepared with different amounts (0%, 10%, 20%, 30%, 50%) of fucoidan red yeast (Monascus purpureus) rice powder (FRYR). The weight and pH of muffins increased as the amount of FRYR increased. The height and baking loss rate of muffins significantly decreased when amounts of FRYR increased (P<0.05), whereas moisture content was not significantly different between all samples. L value and b value of muffins significantly decreased when amounts of FRYR increased (P<0.05). However, a value of muffins significantly increased when amounts of FRYR increased (P<0.05). Hardness, chewiness, and brittleness increased with increasing FRYR concentration. Cohesiveness was higher with 30% FRYR, whereas springiness was not significantly different between the samples. In the sensory evaluation, the appearance and crumb color of muffins was higher in groups containing 0% FRYR, whereas flavor, taste, texture, and overall acceptability scores were highest for muffins with 50% FRYR added. The total polyphenol content and 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity of muffins significantly increased with increasing addition of FRYR (P<0.05). Therefore, addition of FRYR could satisfy the sensory function and functional requirements of muffins. Furthermore, this study proposes the development of various products using fucoidan red yeast rice.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.233-241
• /
• 2011

Currently, solar module is using the two methods such as a glass-filled method or a super-straight method. The common point of these methods is to use glass structure on the front of solar module. However, the reflectance of the solar module is high depending on the height of the incident sunlight due to the flat surface of the module front glass. Purposed to solve these problems, AG (anti-glare) structures were formed on the glass surface. Next is fabrication methods of AG structure. First, uneven structure made by micro blaster equipment was dipped in Hydro-fluidic acid (HF) acid. HF acid process was carried out to remove particles and to make high transmittance. The reflectance and transmittance of the anti-glare glass was compared to those of the bare glass. The reflectance of anti-glare glass decreased approximately 1% compared with bare glass. The transmittance of anti-glare glass was similar to bare glass. According to the sample angle, the difference of the reflectance between bare glass and the anti-glare glass was about 19%. Isc and efficiency value of anti-glare glass on bare solar cell appeared about 3.01 mA and 0.228% difference compared with bare glass. Anti-glare glass on textured solar cell appeared about 9.46 mA and 0.741% difference compared with bare glass. As a result, the role of anti-glare in the substrate is to reduces the loss of sunlight reflected from the surface. In this study, therefore, AG structure on the solar cell was used to improve the efficiency of solar cell.