• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.143-153
• /
• 1997

In this study, bending test was performed on the real-scale, built-up beam test model fabricated by the $CO_2$ arc spot welding to evaluate the applicability of the welding method to the production of the stiffened plate in car-carrying ship. The built-up beam models which were fixed at both ends in longitudinal direction or simply supported to the rigid foundation, depending on the restraint condition of the corresponding car decks considered, were subjected to simulated design vehicle loads or concentrated point loads. During the test, the central deflection and the longitudinal bending stresses were measured from several points on the longitudinal flange face to predict the section properties of the built-up beams. The longitudinal bending stress on each spot weld were also measured to calculate the average horizontal shear force subjected to spot welds. Test results revealed that the shear strength of spot welds with their current weld nugget size and welding pitch was adequate enough to withstand the horizontal shear forces under the design vehicle loads. Although the built-up beam fabricated by the arc spot welding was a discontinuous beam, its mechanical behavior was well explained by the continuous beam theory using the effective breadth of plate. Based on test results, the criterion for the size of spot weld of which the average shear stress might meet the allowable stress requirement of AWS Code could be established.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.67-75
• /
• 2010

Submarine and deep sea diving structures are generally designed based on their ultimate strength. Fatigue strength at welded joint must be also taken into account because working stress is increased due to the increasing of diving depth and using high yield steel. The pressure hulls of submarine are subjected to fluctuating compressive loading. But in addition to the calculated stresses, high residual tensile stresses at welded part have to be considered. The state of stress level of pressure hull is tensile at surface and compressive at deep diving depth. This paper presents the results of an experimental investigation on the crack initiation and growth at the weld toe of T welded joints of HY-100 steel plate under constant amplitude loading. It is also investigated the phenomenon of the fatigue failure and test methods. Fatigue tests have been using real scaled local structural models of full penetration T-welded joint, which is a part of the cylindrical shell structures reinforced by ring stiffeners. Several load ratios under constant amplitude loading are considered in the tests. Crack initiation and growth characteristics are examined based on the beach marks of the cracked section of the test specimens. A design stress-life curve including the design formula is suggested according to tested data.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.68-78
• /
• 2006

In the past few years, considerable efforts have been directed towards the further development of Urea-SCR(selective catalytic reduction) technique for diesel-driven vehicle. Although urea possesses considerable advantages over Ammonia$(NH_3)$ in terms of toxicity and handling, its necessary decomposition into Ammonia and carbon dioxide complicates the DeNOx process. Moreover, a mobile SCR system has only a short distance between engine exhaust and the catalyst entrance. Hence, this leads to not enough residence times of urea, and therefore evaporation and thermolysis cannot be completed at the catalyst entrance. This may cause high secondary emissions of Ammonia and isocyanic acid from the reducing agent and also leads to the fact that a considerable section of the catalyst may be misused for the purely thermal steps of water evaporation and thermolysis of urea. Hence the key factor to implementation of SCR technology on automobile is fast thermolysis, good mixing of Ammonia and gas, and reducing Ammonia slip. In this context, this study performs three-dimensional numerical simulation of urea injection of heavy-duty diesel engine under various injection pressure, injector locations and number of injector hole. This study employs Eulerian-Lagrangian approach to consider break-up, evaporation and heat and mass-transfer between droplet and exhaust gas with considering thermolysis and the turbulence dispersion effect of droplet. The SCR-monolith brick has been treated as porous medium. The effect of location and number of hole of urea injector on the uniformity of Ammonia concentration distribution and the amount of water at the entrance of SCR-monolith has been examined in detail under various injection pressures. The present results show useful guidelines for the optimum design of urea injector for reducing Ammonia slip and improving DeNOx performance.

• 한국방재학회 논문집
• /
• 제6권2호
• /
• pp.37-44
• /
• 2006

기존의 SOC를 보다 효율적으로 활용할 수 있는가를 고민하는 것은 SOC의 증설을 위한 연구.개발.투자만큼이나 중요한 문제이다. 또한 총중량 51톤의 군용 중차량인 전차가 현행법상 국내 교량의 통행에 제한을 받고 있다는 현실적인 문제에서 출발하여, 국내 외의 여러 연구 결과를 바탕으로 축하중 10톤, 총중량 40톤의 현 도로법상 차량의 운행제한 조항을 궤도하중인 군용전차에 일괄 적용하기에는 무리가 있다. 미국 및 NATO에서 사용하고 있는 교량해석방법의 또 다른 표준인 표준급수분류제도 등을 이용하여 우리 실정에 맞게 검증하고, 우리의 단위체계나 교량해석방법과는 다른 산물로서의 데이터베이스로 손쉽게 활용할 수 있어야 하겠다.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.53-62
• /
• 2022

In this study, we have investigated the shielding evaluation methodology for facilities using kV energy generators. We have collected and analysis of safety evaluation criteria and methodology for overseas facilities using radiation generators. And we investigated the current status of shielding evaluation of domestic industrial radiation generators. According to the statistical data from the Radiation Safety Information System, as of 2022, a total of 7,679 organizations are using radiation generating devices. Among them, 6,299 facilities use these devices for industrial purposes, which accounts for a considerable portion of radiation. The organizations that use these devices evaluate whether the exposure dose for workers and frequent visitors is suitable as per the limit regulated by the Nuclear Safety Act. Moreover, during this process, the safety shields are evaluated at the facilities that use the radiation generating devices. However, the facilities that use radiating devices having energy less than or equal to 6 MV for industrial purposes are still mostly evaluated and analyzed according to the National Council on Radiation Protection and Measurements 49 (NCRP 49) report published in 1976. We have investigated the technical standards of safety management, including the maximum permissible dose and parameters assessment criteria for facilities using radiation generating devices, based on the NCRP 49 and the American National Standards Institute/Health Physics Society N.43.3 reports, which are the representative reports related to radiation shielding management cases overseas.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3854-3859
• /
• 2023

Background: This study aims to develop an evaluator that can quickly and accurately evaluate the shielding of low-energy industrial radiation generators. Methods: We used PyQt to develop a graphical user interface (GUI)-based program and employed the calculation methodology reported in the National Council on Radiation Protection and Measurements (NCRP)-49 for shielding calculations. We gathered the necessary factors for shielding evaluation using two libraries designed for Python, pandas and NumPy, and processed them into a database. We verified the effectiveness of the proposed program by comparing the results with those from safety reports of six domestic facilities. Results: After verifying the effectiveness of the program using the NCRP-49 example, we obtained an average error rate of 1.73%. When comparing the facility safety report and results obtained using the program, we found that the error rate was between 1.09% and 6.51%. However, facilities that did not use a defined shielding methodology were underestimated by 31.82% compared with the program (the final barrier thickness satisfied the shielding standard). Conclusion: The developed program provides a fast and accurate shielding evaluation that can assist personnel that work in radiation generator facilities and government officials in reviewing safety.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.3-17
• /
• 1998

본 연구에서는 우리 나라 강우 특성상 잘 발달된 도시 주변 일정 구간의 둔치를 녹지 공간으로 활용하기 위해 둔치의 수목 식재 가능성을 알아보았다. 대전에 위치한 갑천 유역의 수문 자료 및 기상 자료등을 기초로 하여 기존 제방의 홍수 유통 안정성 및 갑천과 유등천 합류 지점을 중심으로 반경 3km 내 세 단면를 표준 단면으로 정하여 둔치에서의 식재 여유고를 산출하였다. 홍수 유통 안정성을 검토한 결과 현 단면에서 기존 설계 홍수량은 세 단면 모두 과다 설계되어 있기 때문에 기존 제방의 홍수 유통 안정성은 충분한 것으로 판단된다. 세 단면 중 두 단면은 수목을 식재할 수 있는 여유고는 충분한 것으로 나타났으며, 나머지 한 단면은 식재할 수 있는 여유고는 거의 없지만 현재 인위적으로 높인 둔치의 단면을 절토하여 통수 단면적을 확보한 후에는 수목의 식재가 가능할 것으로 판단된다. 또한, 기존 하천 폭을 그대로 유지하면서 넓은 둔치를 활용하여 최소한으로나마 자연의 역학관계에 적합하게 갑천의 저수로를 사행화 시킬 수 있으며, 조밀한 수목을 식재할 경우에 줄어드는 통수 단면적은 둔치를 낮추어 습지화할 때 확보되는 통수 면적으로 보충할 수 있다. 둔치에 수목을 식재하여 자연에 가깝게 공원화하여도 홍수량은 안정적으로 소통된다는 것을 이론적으로 증명하였다.

• 한국지반신소재학회논문집
• /
• 제5권1호
• /
• pp.25-32
• /
• 2006

방조제 공사는 바다를 막아 바닷물의 흐름을 차단해가는 과정으로 육상공사와는 달리 수심이 깊고 파랑이 심한 바다에서 이루어지는 공사이기 때문에 축조재료의 유실이 많고 심할 경우 방조제가 붕괴되는 위험이 큰 공사이다. 특히, 방조제의 끝막이 단면은 대규모 사석과 돌망태 등을 이용하여 시공하므로, 구성 재료가 불규칙하고 간극이 크기 때문에 일반적인 지반내의 침투흐름보다 상당히 빠른 침투가 발생된다. 본 연구에서는 방조제 끝막이 후 축조된 사석단면과 후속공정을 통하여 축조되는 방조제단면에 대한 실내 침투모형시험을 수행하여 침투거동을 예측 및 분석하였다. 다양한 조위변화를 재현하여 근고공 필터매트 시공에 따른 사석단면내의 유속변화, 침윤선 분포 등을 계측하여 침투거동을 분석하였다. 실내 침투모형시험 결과, 끝막이 사석단면의 침투유속은 최대 1.7m/sec 발생하였으며, 근고공 필터매트 시공에 따라 최대 침투유속이 23.7% 감소하였다.

• 한국지구과학회지
• /
• 제31권4호
• /
• pp.354-369
• /
• 2010

2006년 10월 22일에서 24일에 걸쳐 한반도 강릉지역에서 강한 집중호우가 발생했다. 이 기간에 대해서 집중호우가 발생하기 전과 강우강도가 가장 강했을 때 나타나는 종관적, 운동학적 특성을 조사하기 위하여 본 연구에서는 지상일기도, 상층일기도, 적외위성영상, 자동기상관측장비(AWS) 자료, NCEP(National Centers for Environmental Prediction) 전구분석자료를 이용하였다. 분석 기간 동안 강릉에서 관측된 총 강수량은 316.5 mm이고, 최대 순간풍속은 $63.7m\;s^{-1}$이다. 일기도를 분석해보면 집중호우가 시작하기 전 온대저기압이 한반도 중부에서 발달하였으며 한반도 북부에 역전기압골이 형성되어 있다. 또한 300 hPa 상층일기도에서는 서해와 한반도 남부에 제트기류가 위치하며, 위치 소용돌이도 이상과 관련된 절리 저기압이 한반도 북서부에서 발달하고 있다. 강우강도가 가장 강했을 때의 특성을 좀 더 자세히 알아보기 위하여 강릉지역의 위치 소용돌이도 이상과 바람, 위치 소용돌이도의 시간-연직 단면도, 연직운동, 발산장과 수렴장, 역학적 온위의 연직분포에 대해 조사하였다. 종관적, 운동학적 과정을 분석해 본 결과 대류권계면 접힘이 집중호우 발생에 큰 역할을 한 것으로 사료된다.

• 한국농공학회지
• /
• 제21권2호
• /
• pp.28-36
• /
• 1979

One of most important problems in the Monsoon Asia today is the production of rice paddy to meet the needs of the ever increasing population. Diversemeans are being employed to meet this demand, both by increasing productivity of existing farm land and by bringing further areas into cultivation. The primary step in either field is to ensure that there is sufficient moisture in the soil to suit the paddy, and at the same this means that excess moisture has to be drained off the land, while in others irrigat ion has to be employed to bring sufficient water to an area. In view of the fact that the project comprises a huge amount of earthwork, it can be carried out by extensive use of construction machinery in order to shorten the period. As farm ditch has a comparatively small section with shallow cutting depth, inaddition, there is lack of access road in the field, the excavation equipment with bulldozer or tracter-shovel (backhoe) type are not applicable because there are mostly adapted for the excavation of deep and wide section. Mini-backhoe with its bucket width not larger than 0. 3m, and width of blade not larger than 1. 00m seems to be more adaptable. About 80% of excavation of ditch section will be done by the machinery while the other 20% of excavation together with the finishing of the section are supposed to be done by man-power. The embankment of ditch section can be compacted by the crawler of backhoe when it is moving along the ditch for excavation. However, Lowland paddy field in the Monsoon Asia are made particulary in rain season, therefore, heavy machinery is not easy excavation for ditch. It is very important to know exact ground support power of the working site and select machines with corresponding ground pressure. Ground support power is variable subject to quality and water content of soil and therefore selection of machines should be made duly considering ground condition of the site at the time of construction works. Farm ditches dug and compacted by mannual labar are of poor quality and subject to destruction after one or two years of operation. On the other hand, excavation and compaction by bulldozer is not practical for ditches. Backboe is suitable for slope land, but this is required cycle time of bucket excavation and dumped out. If a small-scale farm ditch trencher adaptable to lowland paddy field is invented, such a machine could greatly accelerate the massive construction work envisaged in many countries and thus significantly speed up the most difficult part of irrigation development and management in Monsoon Asia.