• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.58-59
• /
• 2016

Along with the logistics development, heavy-loaded warehouses and sales facilities tend to be bigger and designed as a PC structures. PC erection work of heavy-loaded structures is influenced by various factors, including the required construction duration, site and surrounding situations, safety, PC member procurement, equipment rental cost, which ultimately impact the construction cost. It requires creative efforts and a lot of time when preparing an erection plan in consideration of these factors, and the plan prepared has a great influence on safety as well as the construction duration and cost. However, many engineers do not have enough experiences on PC erection work of heavy-loaded, long span structures, making it difficult for them to set erection plans and establish simulations. The study's results will provide a knowledge to obtain a solution for engineers to establish PC erection plans of heavy-loaded, long span structures.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.567-573
• /
• 2019

DABF(Dissolve Air Flotation with Ball Filter) is developed as the DAF with the addition of a fiber ball at the lower part of the DAF. The DABF with a capacity of 4,500 ㎥/h was constructed at Gijang SWRO plant in Busan. Since the ball filter has high filtration rate, the loading rate of DABF was designed from 20 to 42 ㎥/h/㎡. When one DABF basin is in the back washing mode, the loading rate of other two DABF basins is increased to 42 ㎥/h/㎡. Turbidity at the BF outlet in DABF is <2 NTU at turbidity of 5-10 NTU at the BF inlet. If there is no algae bloom and turbidity is low in raw seawater, only BF in DABF is operated and meets <2 NTU at the BF outlet. Even if BF is operated at high hydraulic loading rates, no significant differential pressure increases and reduction in the turbidity removal rate is minimal in a day. Thus, DABF is the pre-treatment technology that provides stable water quality even with BF onlyoperation without DAF operation. Compared with the DAF, DABF requires additional facilities such as valves, piping, and drainage systems for backwashing the BF. But in terms of footprint and operating costs, DABF has more advantages than DAF. With DABF application, the load of the downstream filtration equipment is decreased so that the capacity of the filtration equipment can be reduced. Also, if the downstream filtration equipment is to be maintained the same regardless of DABF, the operating cost of DABF is less than DAF.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.736-743
• /
• 2022

Construction workers experience a high rate of fatal incidents from mobile equipment in the industry. One of the major causes is the decline in the acoustic condition of workers due to the constant exposure to construction noise. Previous studies have proposed various ways in which audio sensing and machine learning techniques can be used to track equipment's movement on the construction site but not on the audibility of safety signals. This study develops a novel framework to help automate safety surveillance in the construction site. This is done by detecting the audio sound at a different signal-to-noise ratio of -10db, -5db, 0db, 5db, and 10db to notify the worker of imminent dangers of mobile equipment. The scope of this study is focused on developing a signal processing model to help improve the audible sense of mobile equipment for workers. This study includes three-phase: (a) collect audio data of construction equipment, (b) develop a novel audio-based machine learning model for automated detection of collision hazards to be integrated into intelligent hearing protection devices, and (c) conduct field experiments to investigate the system' efficiency and latency. The outcomes showed that the proposed model detects equipment correctly and can timely notify the workers of hazardous situations.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.40-44
• /
• 2021

• 디자인학연구
• /
• 제16권4호
• /
• pp.277-288
• /
• 2003

최근 들어 건설중장비 분야에도 디자인에 대한 요구가 날로 증대되고 있으며, 보다 심도 있는 디자인연구가 필요한 시점에 와 있다. 이런 요구에 부응하기 위해서는 건설중장비의 특성과 이해를 바탕으로 변천과정에 대한 연구가 선행되어야 할 것으로 모인다. 본 연구는 건설중장비 디자인의 외관, 조직, 프로세스의 변천과정과 개발사례 등의 연구를 통해 건설중장비디자인의 변천과정을 연구하고 이 연구를 바탕으로 건설중장비디자인의 트렌드 및 추세를 제시하고자 한다. 또한 향후 이 분야의 연구에 기초 자료로서 활용될 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1901-1907
• /
• 2010

굴삭기 유압실린더는 붐, 암, 버킷과 같은 작업장치를 작동시키는 핵심 부품이다. 일반적으로 유압실린더는 반복적인 고압으로 인해 좌굴이나 피로 파손과 같은 구조적 문제가 종종 발생한다. 따라서, 유압실린더의 내구설계 시 설계수명 동안의 피로, 항복, 좌굴 등에 대한 구조 안전도 평가가 반드시 이루어져야 한다. 내구설계는 기본설계와 상세설계 두 단계로 구성되는데, 기본설계 단계에서는 굴삭기의 작업능력, 작업속도, 작업영역 등을 고려하여 항복과 좌굴 안전도를 만족하도록 로드와 튜브의 주요 치수를 결정한다. 상세설계 단계에서는 로드 노치, 용접부, 튜브 끝단, 글랜드, 오리피스, 쿠션링 등의 상세치수를 주로 피로 안전도 측면에서 결정한다. 본 연구에서는 이러한 내구설계의 전반적인 절차와 각 설계 단계에서 내구설계 평가를 위한 해석기법에 대해 기술하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.463-468
• /
• 2004

The digital motor protection, measuring and control equipment, as called "The digital motor control equipment", for applying to single/three phase motors designed an integrated one unit and manufactured a compact size which will be installed on the motor control center. It performs serveral protection functions and motor starting function, and measures and indicates a serveral measurement. This paper proposes the design concept and functionality of new digital motor control equipment to improve control performance and integrate several equipments for the control and protection of the motor.

• 디지털산업정보학회논문지
• /
• 제8권3호
• /
• pp.87-95
• /
• 2012

Up to now, industrial cranes play important roles as the effective machines to carry heavy loads in the manufacturing premise, in the construction field and so on. And, a crane is widely used not only to daily work but also to carry heavy materials efficiently in a construction site for prevention of accident. However, the crane operation is highly complicated even for experts. In this paper, we developed the content of the crane mounted on the controller. This content overload conditions in the operating environment for the crane operator to warn, and the operation of equipment has the capability to limit automatically. The content for crane controller is to alert the operator overload and to limit the operation of equipment for stabilizing capabilities. The content of the flexible algorithm is based on stabilizing controllers, PLC (Programmable Logic Controller) to connect for using the equipment and electrical control systems to ensure the safety of workers and to improve the ability to work possible.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2018

The number of deaths in the korean construction industry is more than three times the OECD average. Although safety management system should be improved to prevent the safety accidents, it is difficult to improve due to domestic safety conditions. Especially, in order to prevent accidents at construction sites, there is an increasing tendency to monitor the movement of workers and equipment in real time by introducing a location positioning system. Therefore, this study proposes a system that can monitor the position of workers and heavy equipments in real - time, detect danger and transmit alarms so that workers can pay attention to safety and keep safety. The system is expected to reduce safety accidents by transmitting alarms to workers so that they can pay attention.

• 한국건축시공학회지
• /
• 제9권6호
• /
• pp.105-111
• /
• 2009

건설기계는 건설사업의 성공적인 수행의 중요한 요인이며, 건설기계에 소요되는 비용이 건설공사비에서 차지하는 비중은 점차 증가하고 있다. 우리나라는 표준품셈에 제시된 건설기계 시공능력 산정식을 이용하여 건설기계의 시간당 작업량을 계산하고 있다. 건설기계 성능은 개선되고 있으나 시공능력 산정식에서 활용되고 있는 요소들은 이를 반영하지 못하고 있는 실정이며 극히 부분적으로만 재 개정되었다. 본 연구에서는 건설기계 시공능력 산정식 요소 중 사이클타임에 대해서 조사하였다. 이를 위해 먼저 관련 선행연구를 분석하였고, 건설공사에 주로 사용되는 건설기계인 굴삭기와 로우더의 사이클타임을 실사하였다. 수집된 자료와 현행 표준품셈의 시공능력 산정식에 적용되는 수치를 바탕으로 시뮬레이션 프로그램인 크리스탈볼을 활용하여 건설기계의 시공능력을 산정하였다.