• 한국추진공학회지
• /
• 제22권1호
• /
• pp.66-71
• /
• 2018

에너지 물질의 수명평가는 중요하게 여겨지지만, 여러 가지 어려움을 갖고 있다. 먼저 노화시험에 매우 긴 시간이 소요되고, 에너지 물질이기 때문에 취급 시 항상 위험이 존재한다. 이런 이유들로 인해서 예측이나 계산 방법들이 발달되어 왔다. 에너지 물질은 열을 내놓으면서 분해되기 때문에, 에너지 물질의 열적 특성을 분석하는 것은 에너지 물질의 분해와 노화 특성을 이해하는데 매우 중요하다. 이번 연구에서는 첫째, DSC를 기초데이터로 하여 AKTS software를 이용하여 간단한 열분석으로부터 열적인 노화 특성을 예측하는 결과들을 발표하고, 둘째, AKTS software를 통해 물성측정 점 데이터로부터 적절한 kinetic 모델을 설정하고, 그 모델로부터 노화에 따른 특성변화를 예측하는 결과를 나타내었다.

• 한국주조공학회지
• /
• 제36권6호
• /
• pp.195-201
• /
• 2016

The effects of Mg addition on heat treatment and mechanical properties of A356 alloy were investigated. With increased amounts of Mg addition to A356 alloy, the grain size decreased and eutectic Si was refined. And, this process can improve the mechanical properties. Solid solution heat treatment causes the spheroidizing of eutectic Si. In this study, although eutectic Si was refined with Mg addition, solid solution time increased from 2 hours to 6 hours with Mg addition, and aging time also increased, from 4 hours to 8 hours. After heat treatment, Mg2Si remained in a formation of Chinese script. And, Chinese script Mg2Si formed with Mg addition caused a reduction of the elongation of the alloys according to the stress concentration.

• The Journal of Advanced Prosthodontics
• /
• 제1권3호
• /
• pp.113-117
• /
• 2009

STATEMENT OF PROBLEM. Recently Yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) has been introduced due to superior flexural strength and fracture toughness compared to other dental ceramic systems. Although zirconia has outstanding mechanical properties, the phenomenon of decrease in the life-time of zirconia resulted from degradation in flexural strength after low temperature aging has been reported. PURPOSE. The objective of this study was to investigate degradation of flexural strength of Y-TZP ceramics after various low temperature aging treatments and to evaluate the phase stability and micro-structural change after aging by using X-ray diffraction analysis and a scanning electron microscope (SEM). MATERIAL AND METHODS. Y-TZP blocks of Vita In-Ceram YZ (Vita Zahnfabrik, Bad $S\ddot{a}ckingen$, Germany) were prepared in 40 mm (length) $\times$ 4 mm (width) $\times$ 3 mm (height) samples. Specimens were artificially aged in distilled water by heat-treatment at a temperature of 75, 100, 125, 150, 175, 200, and $225^{\circ}C$ for 10 hours, in order to induce the phase transformation at the surface. To measure the mechanical property, the specimens were subjected to a four-point bending test using a universal testing machine (Instron model 3365; Instron, Canton, Mass, USA). In addition, X-ray diffraction analysis (DMAX 2500; Rigaku, Tokyo, Japan) and SEM (Hitachi s4700; Jeol Ltd, Tokyo, Japan) were performed to estimate the phase transformation. The statistical analysis was done using SAS 9.1.3 (SAS institute, USA). The flexural strength data of the experimental groups were analyzed by one-way analysis of variance and to detect statistically significant differences ($\alpha$= .05). RESULTS. The mean flexural strength of sintered Vita In-Ceram YZ without autoclaving was 798 MPa. When applied aging temperature at below $125^{\circ}C$ for 10 hours, the flexural strength of Vita In-Ceram YZ increased up to 1,161 MPa. However, at above $150^{\circ}C$, the flexural strength started to decrease. Although low temperature aging caused the tetragonal-to-monoclinic phase transformation related to temperature, the minimum flexural strength was above 700 MPa. CONCLUSION. The monoclinic phase started to appear after aging treatment above $100^{\circ}C$. With the higher aging temperature, the fraction of monoclinic phase increased. The ratio of monoclinic/tetragonal + monoclinic phase reached a plateau value, circa 75% above $175^{\circ}C$. The point of monoclinic concentration at which the flexural strength begins to decrease was between 12% and 54%.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.595-601
• /
• 2016

현재 건축구조물에 사용되는 단열재의 단열성능은 초기성능을 기준으로 설계 시에만 반영하고 있으며, 장기 내구성 저하에 따른 단열성능 감소는 반영되고 있지 않다. 본 연구에서는 가속내구성 시험을 통해 단열재의 내구성 저하에 따른 단열성능 저하를 검토하였다. 연구결과, 발포폴리스티렌 단열재 비드법의 경우 표준환경 조건 및 실험실 가속 시험 조건에서는 경시변화에 따른 성능저하가 나타나지 않았으나, 동결 융해 시험 조건에는 성능이 저하하는 것으로 나타났다. 반면, 압출법의 경우 동결 융해 시험 조건에서는 단열성능 저하가 작았지만, 경시변화 초기에 내부 가스의 방출로 급격한 성능저하를 나타내었다. 또한, 경질 폴리우레탄 폼 단열재의 경우 다른 단열재에 비해 초기 단열성능이 매우 뛰어났으나, 실험실 가속 시험조건 및 동결 융해 시험 조건에서는 성능이 다소 저하하는 것으로 나타났다.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.177-183
• /
• 2008

고온-고압의 장시간 사용으로 나타나게 되는 재료열화현상을 이해하고 구조건전성 모니터링을 위한 기초연구로 사용하고자 대표적인 로터용 내열강인 2.25CrMo 강과 9CrMo 강 그리고 12CrW 강을 연구하였다. 재료열화를 모니터링하기 위해 2.25CrMo 강은 등온열화 시험을 9CrMo 강은 크리프-피로 시험을 그리고 12CrW 강은 크리프 시험을 각 단계별로 수행하였다. 이들 각 손상재에 대한 초음파전파특성, 비저항측정 그리고 보자력측정을 통하여 미세조직 의존성을 고찰하였고 이들 파라미터는 특정 미세조직의 변화에 상당히 민감하게 작용하였다.

• 한국추진공학회지
• /
• 제1권2호
• /
• pp.91-102
• /
• 1997

점화기의 성능에 미치는 노화의 영향을 알아보기 위하여 12년, 15년, 16년 경과된 활성 모타로부터 점화기를 분해하여 점화제의 특성 값을 측정하고 점화기의 연소 시험을 하였다. 점화제인 B/$KNO_3$ 펠렛의 수분 함량, 외형 치수, 분쇄 강도, 열 분해 특성, 발열량 등을 측정한 결과, 노화 기간에 비례하여 분쇄 강도는 다소 증가하였고 발열량은 감소하였으나 그 외의 특성 값들은 변화가 없었다. 밀폐 용기 시험과 비활성 모타 연소 시험 결과, 노화된 점화제의 연소 속도는 약 10% 증가하였고, P-t 곡선의 압력을 적분한 값 $P_t$는 약 15% 감소하였다. 연소 속도는 점화제에 균열이 발생할 경우 증가하고 $P_t$는 폭발 열량에 비례하여 감소함을 추론할 수 있었다.

• 열처리공학회지
• /
• 제4권3호
• /
• pp.13-20
• /
• 1991

The present work was aimed to examine the variation of precipitations and mechanical properties by thermomechanical treatments (TMT) in Al-2.19 wt%Li and Al-2.0 wt%Li-0.11 wt%Zr alloys. This study was performed by TEM, SEM observation, DSC, electrical resistance measurement, hardness and tensile strength measurement. First peak of resistivity aged at $90^{\circ}C$ was caused by precipitation of ${\delta}^{\prime}$-precursor phase, and second peak was caused by precipitation of ${\delta}^{\prime}$ phase. According to this result, the precipitation process of Al-2.19 wt%Li alloy was as follow : $SSSS{\rightarrow}{\delta}^{\prime}$-precursor phase ${\rightarrow}{\delta}^{\prime}$ (Coherent ${\rightarrow}$ Semi-coherent) ${\rightarrow}{\delta}$. In a Al-2.0 wt%Li-0.11 wt%Zr ternary alloy, the first peak of resistivity was appeared at initial aging heat-treatment. It is result from exsistant of ${\delta}^{\prime}$-precursor phase. The effect acceleration in a binary alloy was not appeared and the over-aging ternary alloy was accelerated with increase of the reduction rate. It is caused by combination effect of ${\delta}^{\prime}$ and composite phase.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.113-125
• /
• 2019

The radish skin and radish greens are an edible part of the radish. But they are removed before eating the radish and used as a byproduct or an animal feed material because of their tough and rough texture. This study was conducted to investigate the effect of supercritical heat-treated radish-extract on UV-induced HRM-2 wrinkled mouse animal model on anti-aging wrinkles. Supercritical heat-treated radish-extract was applied on the back of seven-weeks old HRM-2 mice. The effect of HRE on skin thickness, elasticity and wrinkle formation of the mice was observed by using UVB lamp to induce melanogenesis and wrinkle formation. As the result, increased depth of wrinkles was observed in the negative control group in comparison to the normal group. In contrast, decreased depth of wrinkles was observed in the radish-extract-free group compared to the negative control group. In the study of the effect of radish-extract on wrinkle-formation related gene expression and protein what protein expression, MMP-2 and MMP-9 gene expression significantly increased in the negative control group compared to the normal group. The gene expression reduced in dependence to the mass of radish-extract treated. Similar to quantitative results of mRNA expression, the expression of MMP-2 protein increased as a result of UVB-irradiation. The MMP-2 expression was inhibited in dependence to the mass of radish-extract treated. In conclusion, the supercritical heat-treated radish-extract has an effect on improving skin wrinkles not only when it is applied to the skin but also when orally ingested. Thus, it can be effectively used as a composition to health functional products. Therefore we can also conclude that radish a food that does not show any side-effects even upon long-term intake can reduce wrinkle formation as well as improve skin elasticity when taken regularly for a long period.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.33-38
• /
• 2022

Currently, Korea is an aging society, and it is expected to enter a super-aging society in about 4 years. Accordingly, many X-ray technologies are being developed. In X-rays, 99% of X-rays are converted into heat energy and 1% into light energy (X-rays). 99% of the thermal energy raises the temperature of the anode and its surroundings, and the cooling system is an important factor as overheating can affect the deterioration of X-ray quality and shortened lifespan. There is a method of forced air cooling using natural convection. Therefore, in this study, when X-rays were taken 5 times, Flow analysis was performed on heat removal according to temperature rise and cooling time for the heat generated at the anode of the X-ray tube (input power 60kW, 75kW, 90kW). Based on one-shot, the most rapid temperature rise section increased by more than 57% to 0.03 seconds, A constant temperature rises from 0.03 seconds to 0.1 seconds, It is judged that the temperature rises by about 8.2% or more at one time. After one-shot cooling, the cooling drops sharply from about 60% to 0.03 seconds, It is judged that the temperature has cooled by more than 86% compared to the temperature before shooting. One-shot is cooled by more than 86% with cooling time after 0.1 seconds, As the input power of the anode increases, the cooling temperature gradually increases. Since the tungsten of the anode target inside the X-ray tube may be damaged by thermal shock caused by a rapid temperature rise, an improvement method for removing thermal energy is required when using a high-input power supply.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.313-324
• /
• 2015

Austenitic stainless steels have been widely used in many engineering fields because of their high corrosion resistance and good mechanical properties. However, welding or aging treatment may induce intergranular corrosion, stress corrosion cracking, pitting, etc. Since these types of corrosion are closely related to the formation of chromium carbide in grain boundaries, the alloys are controlled using methods such as lowering the carbon content, solution heat treatment, alloying of stabilization elements, and grain boundary engineering. This work focused on the effects of aging and UNSM (Ultrasonic Nano-crystal Surface Modification) on the intergranular corrosion of commercial 316L stainless steel and the results are discussed on the basis of the sensitization by chromium carbide formation and carbon segregation, residual stress, grain refinement, and grain boundary engineering.