• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.170-178
• /
• 2019

최근 에너지 절감에 대한 관심도가 높아짐에 따라 에너지 소비가 높은 형광등과 백열등을 대체하는 친환경소재인 LED의 조명을 활용하는 움직임이 활발하다. 그러나, 고출력 LED의 경우 발열에 의한 열화현상 때문에 수명이 단축되는 현상이 발생하게 된다. 이에 대한, 해결방안으로 본 논문은 LED Packing중 방열판표면의 거칠기 처리를 통하여 열전달 계수를 증대시킴으로서 LED 수명연장 효과를 평가하였다. 거칠기 공정은 사포 및 샌드블라스트를 이용하여 진행하였다. 각 표면처리 공정에 따른 거칠기 및 표면적 변화를 정량적으로 평가하였으며, 열전달 계수를 측정하였다. 샌드블라스트, 사포를 이용하여 알루미늄 표면에 거칠기처리를 진행했을 경우 미 처리 시 보다 높은 대류 열전달 계수를 얻을 수 있었고, 샌드블라스트 처리 시 약 82.76%의 높은 방열 효율 향상을 얻을 수 있어, 이를 방열판에 적용할 시 큰 경제적 부담 없이 기존대비 더 높은 방열효율 증대를 통해 LED 수명을 대폭 연장 시킬 것으로 기대된다.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.70-75
• /
• 2021

Recently, several efforts have been made to improve the thermal efficiency of a refrigerant compressor. In this study, we attempted to improve energy efficiency ratio (EER) performance by reducing the superheat of the linear compressor. To this end, heat generated inside the compressor must be effectively dissipated. Therefore, heat dissipation was improved by processing ribs in the gap-flow region generated owing to the vibration of the compressor body. The results showed that the convective heat transfer coefficient becomes significantly high when ribs are used, increasing the heat dissipation rate. This helps improve EER by reducing the superheat of the compressor.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.153-158
• /
• 2016

This paper aims to discuss the Non Darcy boundary layer flow of non-conducting viscous fluid with magnetic ferroparticles over a permeable linearly stretching surface with ohmic dissipation and mixed convective heat transfer. A magnetic dipole is applied "a" distance below the surface of stretching sheet. The governing equations are modeled. Similarity transformation is used to convert the system of partial differential equations to a system of non-linear but ordinary differential equations. The ODEs are solved numerically. The effects of sundry parameters on the flow properties like velocity, pressure, skin-friction coefficient and Nusselt number are presented. It is deduced the frictional resistance of Lorentz force decreases with stronger electric field and the trend reverses for temperature. Skin friction coefficient increase with increase in ferromagnetic interaction parameter. Whereas, Nusselt number decrease.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.103-116
• /
• 1994

In this study the behavior of engine cooling loss and overall heat transfer coefficient were studied experimentally using naturally aspirated engine and turbo charged engine. Using turbo charging, heat dissipation was increased because of the density of the mixture was increased with increment of inlet air flow rate. Therefore, cooling loss of turbo charged engine is larger than naturally aspirated engine. As taking the measurement of surface temperature of combustion chamber, gas heat transfer coefficient was calculated and found that it has greatly affected to overall heat transfer coefficient. The empirical formula of overall heat transfer coefficient established in order to predict of engine cooling loss and express only as a function of mean piston velocity.

• 오토저널
• /
• 제2권1호
• /
• pp.39-50
• /
• 1980

This paper presents the variations obtained in heat flow rate and engine performance of a four-stroke cycle Diesel engine when there were changes in the temperature of cooling water, compression ratio, injection timing of fuel, and other factors. Heat dissipation of engine cylinder was calculated by the heat transfer coefficient of Nusselt's empirical equation and the analysis of distribution of temperature in cylinder barrel was obtained by the finite element method of two-dimensional steady state heat conduction. In this experiment, the out side temperature of cylinder liner was measured by the data logger, and the temperature distribution of liner was computed by the analysis of triangular finite element model under the assumption due to surface heat flux of cylinder inner surface. The results obtained by this study are as follows. Under the given operating condition, the temperature distribution of cylinder liner by using finite element method shows that the mean temperature of barrel is in accordance with the experimental results of Eichelberg and temperature difference is lower than 4.23.deg. C. The heat dissipation of engine decrease in accordance with the decrease of piston mean velocity, compression ratio, and the increase of coolant temperature. Influence on the delay of injection timing of fuel brings about the decrease of heat rejection over the cylinder at constant test conditions.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.455-462
• /
• 1996

Automobile Fuel Shortage Detecting Sensor, in this paper, was fabricated by using heat dissipation coefficient difference between gasoline and air condition the NTC thermistor of Mn-Ni Co system with the composition ratio of Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt%. The condition of sensor operation is that, for turn-on characteristics, the time of arriving at 135mA must be less than 180 second when the DC voltage of 11V is applied in the air condition of -10.deg. C and that, for turn-off characteristics, the saturation current must be less than 60mA when the DC voltage of 15V is applied in the gasoline condition of 60.deg. C. It is known, from the experimental results, that the resistance range and B-constant for the Automobile Fuel Shortage Detecting Sensor with dimension of 5*3*0.9mm were 850-1150.ohm. and 1150-1250.deg. C, respectively and the resistance range and B-constant were agree with that of sensor operation condition. When Bi$_{2}$O$_{3}$ of 0-0.5wt% was added to Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt% composition, the resistivity and B-value were 380-430(.ohm.-cm) and 1930 - 2030, respectively. Particularly, for Bi$_{3}$O$_{3}$ of 0.25-0.5wt%, the sintering density of over 90% and the operation characteristics necessary to Automobile Fuel Shortage Detecting Sensor were obtained. The difference of heat dissipation coefficient gasoline and air condition was 15 times.

• 대한기계학회논문집
• /
• 제1권2호
• /
• pp.95-103
• /
• 1977

The expermental research was carried out to investigate the thermal performance of the locally manufactured radiators for 1300cc automobiles. The choice of .epsilon. value (the ratio of water tube surface area to the total heat transfer area ) resulted in remarkable difference in their performance including the Louver effect, the overrall heat tranfer coefficient and the heat dissipation capability.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.472-477
• /
• 2000

Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권3호
• /
• pp.157-178
• /
• 2019

The present correspondence is conveyed on to consider the fascinating and novel characteristics of radiative hydromagnetic convective flow of a chemically reacting fluid over an exponentially accelerated inclined porous plate. Exact solutions for the fluid velocity, temperature and species concentration, under Boussinesq approximation, are obtained in closed form by the two term perturbation technique. The interesting parts of thermal dispersing outcomes are accounted in this correspondence. Graphical evaluation is appeared to depict the trademark direct of introduced parameters on non dimensional velocity, temperature and concentration profiles. Also, the numerical assortment for skin friction coefficient, Nusselt number and Sherwood number is examined through tables. The certification of current examination is confirmed by making an examination with past revelations available in composing, which sets a benchmark for utilization of computational approach.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.89-93
• /
• 2018

1200V 이상 급의 전기자동차의 파워 모듈에 적용되는 세라믹 기판은 구동 전력으로 고전력이 인가되는 특성상 고열전도도, 고 전기절연성, 저열팽창계수, 급격한 온도 변화에 대한 저항성의 특성이 요구된다. 방열기판에 적용되는 세라믹 중 질화알루미늄과 질화규소는 그 요구를 충족하는 소재로서 고려되고 있다. 이에 따라 본 논문에서는 질화알루미늄과 질화규소의 방열기판 소재로서의 특성을 상용해석프로그램을 통해 비교하였다. 그 결과 질화규소는 질화알루미늄에 대해 각각 동일한 조건의 열을 부여하는 공정을 시물레이션으로 구현했을 때 스트레스와 휨이 덜 발생하여 더 우세한 내충격성, 내stress성을 보였다. 열전도도 측면에서는 질화알루미늄이 방열 소재로서 더 우수한 특성을 지니지만 신뢰성 측면에서는 질화규소가 더 우세함을 시물레이션을 통해 관찰하였다.