• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 추계학술논문발표회 논문집
• /
• pp.478-481
• /
• 2011

This study is intended to evaluate and optimize the characteristics of smoke spreading and the appropriateness of evacuation time extended by operation of smoke control system during fire within the underground space of the building structured in compliance with the smoke control system performance criteria from the local fire safety standard, which has been currently applied to the buildings in Korea. Using the heat release per unit weight of the combustibles, a numerical analysis both in case of smoke control system in operation and the system not in operation was carried out at the several different shopping malls. From the viewpoint of securing the evacuation time, the results were compared in an attempt to assess the appropriateness of the fire safety criteria.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.177-182
• /
• 1996

The objective of this thesis is to investigate the influence of welding residual stresses on the fatigue growth behavior of welding residual stresses on the fatigue growth behavior of cracks located transverse to the weld bead. For this purpose, G.T.A. (Gas Tungsten Arc) welding was performed on the Al. Alloy 1100-0 plate and the same initial crack is made on HAZ(Heat Affected Zone), weld metal and base metal respectively. C.T.(Compact Tension) specimens were used as experimental material. Initial welding residual stresses were measured by using strain gage sectioning method. All specimens were tested under constant amplitude load with stress ratio R=0.1

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.104-111
• /
• 2006

The non-linear properties of rubber material which are described as strain energy function are important parameter to design and evaluate of rubber spring. These are determined by material tests which are uni-axial tension and bi-axial tension. The computer simulation using the nonlinear element analysis program executed to predict and evaluate the load capacity and stiffness for chevron spring. In order to investigate the heat-aging effects on the rubber material properties, the acceleration test were carried out. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the compression set test, several useful life prediction for rubber material were proposed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.110-111
• /
• 2013

This research studies in the field of domestic fires are an issue in many scientific fire research as a research method to validate the domestic environment and ISO-9705 housing on the basis of experiments in virtual space by making a single fire compartment space for conducting experiments and Appearance of a fire occurring within each flammable Heat Release Rate analysis was carried out mainly. Placed within the space of one flammable HRR calculated as the sum of the number of single-room fire experiments conducted and the results compared with the value in comparing the conduct of fire locations and fire load within the building area of the future, the HRR value represents the change in domestic a consideration of the safety of the building is to propose matters.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.25-28
• /
• 2010

A cooldown time is one of the major factors in many cryocooler applications, especially for the design of conduction-cooled superconducting apparatus. The estimation of cooldown seeks the elapsed time to cool thermal object by a cryocooler during initial cooldown process. This procedure includes the dimension of cold mass, heat transfer analysis for cryogenic load and available refrigerating capacity of a cryocooler. This method is applied to the specific cooling system for a 3 Tesla superconducting magnet cooled by a two-stage GM cryocooler. The result is compared with that of experiment, showing that the results of proposed method have a good agreement with experiments during initial cooling of superconducting magnet.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.781-788
• /
• 2013

엔진 설계시 실린더 주요 부품의 온도 분포 계산은 엔진 전체 구조안정성 평가시 열응력에 의한 변형을 고려하기 위해 필수적으로 수행된다. 최근 박용 및 발전용 중속엔진은 압축비 및 출력이 증대 되어 설계되고 있는 추세여서 증가된 연소실 열부하에 의한 영향을 고려하기 위해 열전달 해석의 높은 정확도가 요구되고 있다. 본 연구에서는 엔진 설계시 실린더 주요 부품의 온도 분포를 계산하고 계산된 온도 수준이 설계기준에 만족하는지를 정확히 평가 하기 위한 열전달 해석 프로세스를 정립하였다. 각 주요 열부하 영역의 경계조건 설정 과정을 1 차원 엔진 성능해석 및 3 차원 열유동 해석을 통하여 산출하여 적용하였으며 해석 결과는 해당엔진 모델의 프로토 타입엔진 주요 부품 온도를 계측하여 검증하였다.

• 한국재난정보학회 논문집
• /
• 제10권4호
• /
• pp.583-597
• /
• 2014

난방기기에 의한 화재는 다양한 난방기기의 종류처럼 그 원인도 다양하고. 매년 계속되는 전통재래시장에서의 난방기기에 의한 화재사고가 빈번히 발생하여 인명 및 재산상의 손실을 초래하고 있다. 일반주택이나 아파트 등 대부분의 주거시설은 난방용 보일러가 보급되어 난방기기로 인한 화재가 그리 많지 않으나 식당, 시장의 점포와 사무실, 체육관, 공장, 작업장 등에서는 여전히 석유난로, 전기난로 등 난방기기를 사용 하고 있어 화재의 위험성에 노출되어 있다. 또한 난방용 기기의 발생건수를 살펴보면 가정용보일러, 목탄난로, 석유난로, 가스난로/스토브, 전기스토브/히터 순으로 발생한 것으로 분석되었으며, 인명피해 별 건수는 가스난로/스토브, 석유난로 /곤로, 전기히터/스토브, 연탄/석탄난로 순으로 분석되었다. 또한 가스 및 석유관련 난방용기기가 발생빈도(frequency)는 낮지만 화재강도(intensity)가 높은 것으로 분석 되었다. 따라서 본 연구의 목적은 다중이용시설인 전통재래시장에서 아직도 많이 사용되고 있고, 실제 화재발생사례가 많은 석유난로와 전기스토브에 의한 발화 위험성 즉 최소발화온도, 탄화 정도와 그에 따른 열유속을 정상상태와 비정상상태 하에서의 가연물의 접촉 및 전도로 인한 화재 발생 가능성을 재연하여 검토해 봄으로서 보다 과학적인 화재조사 및 감식 접근방법을 강구하고자 하였다. 재연실험 결과 실험체 2종(석유난로/전기스토브) 모두 양호한 축열 조건이 만들어지지 않는 한 발화위험성은 극히 적은 것으로 나타났지만 탄화의 상태는 각 부위별로 진행되는 것으로 분석되었다. 결국 화재로의 전이는 축열에 의한 발화이므로 최소한 화재장소의 축열 온도조건이 $500^{\circ}C$ 이상일 때 발화되는 것으로 분석되었다. 특히 전기스토브의 발열체인 석영관인 경우 가장 짧은 시간 내(10sec)에 $600^{\circ}C$ 이상의 온도로 급 가열 되어 이때의 열유속은 6.26kW/m2으로 나타나 이는 보온된 PVC케이블이 손상과 함께 인체에는 2도 화상을 입히는 결과를 나타내는 것으로 분석 되었다. 아울러 온도 조건 이외에 거리변화에 따른 열량의 감소분을 나타내는 형태계수(Geometric View Factor)와 화재하중(Fire Load)에 따른 온도 변화도 고려되어야 할 중요한 변수임 알았다. 따라서 이에 관한 세심한 화재조사 및 감식의 매뉴얼이 있어야 할 것으로 사료되며 이러한 실험에 의한 과학적이고 합리적인 노력들이 향후 화재조사 및 감식에 대한 매뉴얼 작성과 이론적 토대를 세우는데 기여하기를 기대한다.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.173-178
• /
• 2018

This study organizes scenarios on the power supply and demand plans considering the uncertainties and the portion of distributed energy resources. In analysing the scenarios, it estimates total electricity supply cost in the social aspect, natural gas demand and air pollutants emission including carbon dioxide. Also the analysis is performed to estimate the marginal cost of carbon dioxide reduction for the fuel switching from coal to liquified natural gas. In result, the social cost could be decreased by replacing some portion of renewable energy by LNG-based combined heat and power and delaying the construction of large base-load generators such as coal and nuclear plants. The marginal carbon dioxide reduction cost by fuel switching is in plausible range for fuel switching to be an option for carbon dioxide emission reduction when the social cost is considered.

• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.47-52
• /
• 2010

Miniaturization and lightweight are increasingly the recent trend in the manufacture of electric appliances and machine parts. So technology of micro joining for joining materials is indispensable. This paper gives a description of an experimental study of the ultrasonic welding of metals. In ultrasonic metal welding, high frequency vibrations are combined with pressure to join two materials together quickly and securely, without producing significant amount of heat. Ultrasonic metal welder consists of Transducer, Booster, and Horn that are designed very accurately to get the natural frequencies and vibration mode. In this study, The horn was designed and analyzed the natural frequency by the modal analysis and harmonic analysis. And using a fiber optic sensor, we measured the amplitude and analyzed the Fast Fourier Transformed result. Using the horn, Ultrasonic metal welding between Ni sheet and Ni sheet of 0.1mm thickness was accomplished under the optimal conditions of static pressure 0.15MPa, vibration amplitude 45% and welding time of 0.28s. This result can be used for ultrasonic metal welding in manufacturing industry.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.928-931
• /
• 2006

Due to their light weight, high stiffness-to-weight and strength-to-weight ratios, and potentially high resistance to environmental degradation, resulting in lower life-cycle costs, polymer composites, are increasingly being considered for use in civil infrastructure applications. Recently, an FRP deck has been installed on a state highway, located in New York State. In this study, a thermal stress analysis was conducted using finite element method to study failure mechanisms of the superstructure. This analysis evaluated small and large temperature gradient effects on the FRP deck considering lightweight of FRP deck and ply orientations at the interface between steel girders and FRP deck Finite element model was verified using the load tests of the bridge deck. Finally, the analytical results shows the possible failure mechanism of FRP deck under various temperature changes and its corresponding index is suddenly varied depending on the rapid change of temperature on the deck plate.