• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.453-462
• /
• 1990

The interaction of forced convection-conduction with thermal radiation in laminar boundary layer over a plate fin is studied numerically. The analysis is based on complete solution whereby the heat conduction equation for the fin is solved simultaneously with the conservation equations for mass, momentum and energy in the fluid boundary layer adjacent to the fin. The fluid is a gray medium and diffusion(Rosseland) approximation is used to describe the radiative heat flux in the energy equation. The resulting boundary value problem are convection-conduction parameter N$_{c}$ and radiation-conduction parameter m, Prandtl number Pr. Numerical results are presented for gases with the Prandtl numbers of 0.7 & 5 with values of N$_{c}$ and M ranging from 0 to 10 respectively. The object of this study is to provide the first results on forced convection-radiation interaction in boundary layer flow over a semi-infinite flay plate which can be used for comparisons with future studies that will consider a more accurate expression for the radiative heat flux. The agreement of the results from the complete solution presented by E. M. Sparrow and those from this paper for the special case of M=0 is good. The overall rate of heat transfer from the fin considering radiative effect is higher than that from the fin neglecting radiative effect. The local heat transfer coefficient with radiative effect is higher than that without radiative effect. In the direction from tip to base, those coefficients decrease at first, attain minimum, and then increase. The larger values of N$_{c}$ M, Pr give rise to larger fin temperature variations and the fin temperature without radiative effect is always higher than that with radiative effect.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.52-60
• /
• 2000

In the prior studies, we reported that the dye uptakes of C. I. Disperse Violet 1 on polyester fiber in hexane and cyclohexane were higher than those in the other solvents, as the number of carbon atoms of alkanes decreased, the dye uptake increased, and the logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are inversely proportional to the solubilities. In this study, for Interpretation of dyeing behavior of C. I. Disperse Violet 1 on polyester in alkanes, the thremodynamic parameters of dyeing, such as standard affnity, heat of dyeing(enthalpy change), entropy change, diffusion coefficient, and activation energy of diffusion, were obtained from isotherms and dyeing rates at different temperature. As the number of carbon atoms of alkanes increased, the standard affinity decreased, but the heat of dyeing(enthalpy change) and the entropy change showed larger negative values. These results mean that as the number of carbon atoms of alkanes increases, the dye uptake decreases, but both the fraction of the dye molecules dyed at relatively highly aligned or compact region of polyester fiber and the regularity of dye aggregates in the fiber become increased. As the number of carbon atoms of alkanes increased, the diffusion coefficient decreased, but the activation energy of diffusion increased. In the alkane of larger number of carbon atoms, because the solubility of the dye is higher, the desorption rate of the dye is faster and the diffusion coefficient is smaller than those in the smaller alkanes. But the energy required to separate the dye molecules from the alkane molecules is much higher because the interaction between the alkane molecule and the dye molecule become strong with the number of carbon atoms.

• 열처리공학회지
• /
• 제3권3호
• /
• pp.5-12
• /
• 1990

This study has been conducted to establish the carburizing characteristics of low carbon alloy steels with varying amount of Ni element gas-carburized for 2 hours at $930^{\circ}C$ in an atmosphere of 94% $N_2$-6% $C_3H_8$ gas mixture with some changes in gas pressure passing through the diffusion plate in the fluidized-bed furnace. The results obtained from the experiment are as follows : (1) Optical micrograph has shown that the carburized layer consists of retained austenite and plate martensite and that retained austenite increases as the pressure of gas mixture passing through the diffusion plate as well as Ni content increase. (2) Chemical analysis has shown that carbon potential increases and carburizability is also improved due to a less degree of fluidization as the pressures of gas mixtures passing through the diffusion plate increase, resulting in, however, a severe formation of soot, and the gas pressure is necessarily regulated. (3) It has been revealed that carbon concentration hardness values at a given distance measured from the surface within the carburized case. Increase with increasing the pressure of gas mixtures passing through the diffusion plate and decrease with increasing Ni content. (4) The effective case depth has been shown to almost linearly increase as the pressure of gas mixtures passing through the diffusion plate is increased and to decrease with increasing Ni content.

• 전기화학회지
• /
• 제11권4호
• /
• pp.273-283
• /
• 2008

고분자 전해질 연료전지의 구성요소인 기체 확산층(Gas Diffusion Layer)은 반응물을 채널에서 MEA로 전달하며 동시에 생성물을 MEA에서 채널로 전달하는 역할을 한다. 기체 확산층의 기체 투과도가 클수록 기체 확산층을 통과하는 반응기체의 양이 증가하여 고분자전해질 연료전지 성능이 향상되며 물질전달과 함께 열전달이 이루어지기 때문에 생성열에 의한 MEA의 온도상승을 억제해준다. 본 연구에서는 기체 확산층의 기체투과도를 달리하여 전기화학 반응과 열 생성을 고려한 3차원 수치해석 모델을 통해 동일 반응면적을 가지는 직선형 채널과 곡사형 채널에 대해 열전달 및 물질전달 특성을 분석하였다. 수치해석 결과 직선형 채널의 경우 곡사형 채널에 비해 기체 확산층의 기체투과도에 따른 성능 변화가 크지 않았다. 이러한 이유는 직선형 채널에서 주된 물질전달은 확산에 의해 이뤄지기 때문이다. 곡사형 채널의 경우 기체투과도가 높을수록 대류에 의한 물질전달로 원활한 물질전달이 이뤄졌기 때문에 연료전지 성능이 증가 되었으며 원활한 물질전달이 열전달을 촉진하여 MEA의 온도를 낮추었다. 또한 곡사형 채널에서는 기체투과도가 작아질수록 확산에 의한 물질 및 열전달 특성을 보여주었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.261-266
• /
• 2003

An experimental study has been conducted to evaluate the effects of $CO_{2}$ on heat transfer from hydrogen oxygen-enriched flame. Experiments were performed on flames stabilized by a co-flow swirl burner, which mounted on top of the furnace. Five composition conditions of oxidizer were chosen with replacing $N_{2}$ with $CO_{2}$. In a steady state, total and radiative heat flux rates from the flame to the wall of furnace has been measured using heat flux meters. Temperature distribution in furnace also has been checked. Increasing $CO_{2}$ ratio in the oxidizer, the dominant heat transfer mode was changed into convection from radiation. Temperature in the furnace decreased but total heat flux increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2334-2339
• /
• 2008

This paper proposes an improved mathematical model for predicting the frosting behavior on a two-dimensional fin considering the heat conduction of heat exchanger fins under frosting conditions. The model consists of laminar flow equation in airflow, diffusion equation of water vapor for frost layer, and heat conduction equation in fin, and these are coupled together. In this model, the change in three-dimensional airside airflow caused by frost growth is accounted for. The fin surface temperature increased toward the fin tip due to the fin heat conduction. On the contrary, the temperature gradient in the airflow direction(x-dir.) is small throughout the entire fin. The frost thickness in the direction perpendicular to airflow, i.e. z-dir., decreases exponentially toward the fin tip due to non-uniform temperature distribution. The rate of decrease of heat transfer in the airflow direction is high compared to that in the z-direction due to more decrease in the sensible and latent heat rate in x-direction.

• 열처리공학회지
• /
• 제32권2호
• /
• pp.79-85
• /
• 2019

To investigate the influence of heat treatment on the growth intermetallic compounds (IMCs) at the joint interface of friction-welded Cu-Al, several heat treatments are performed at three different temperature with different times. The experiments reveal three different IMCs layers which are significantly influenced by atomic diffusion of Cu and Al with heat treatment conditions. Since the formation of these IMCs layers can affect mechanical properties of friction-welded Cu-Al interfaces, the relationship between the microstructure of IMCs layers and the tensile strength is analyzed according to heat treatment temperature and times.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.372-375
• /
• 2017

ZnO thin films were deposited by RF magnetron sputtering and then diffused by using an As source in the ampouletube. Also, the ZnO p-n homojunction was made by using As-doped ZnO thin films, and its properties were analyzed. After the As doping, the surface roughness increased, the crystal quality deteriorated, and the full width at half maximum was increased. The As-doped ZnO thin films showed typical p-type properties, and their resistivity was as low as $2.19{\times}10^{-3}{\Omega}cm$, probably because of the in-diffusion from an external As source and out-diffusion from the GaAs substrate. Also, the ZnO p-n junction displayed the typical rectification properties of a p-n junction. Therefore, the As diffusion method is effective for obtaining ZnO films with p-type properties.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1185-1191
• /
• 1999

Radiation-induced oscillatory instability in diffusion flames is numerically investigated with nonlinear dynamics considered. As the simplest flame model, a diffusion flame established in the stagnant mixing layer is employed with optically thin gas-phase radiation and unity Lewis numbers for all species. Attention is focused on the radiation-induced extinction regime, which occurs at large $Damk\ddot{o}hler$ number. Once the steady flame structure is obtained for a prescribed value of the initial $Damk\ddot{o}hler$ number, transient solution of the flame is calculated after a finite amount of the $Damk\ddot{o}hler$-number perturbation is imposed on the steady flame. Transient evolution of the flame exhibits three types of flame-evolution behaviors, namely decaying oscillatory solution, diverging solution to extinction and stable limit-cycle solution. A dynamic extinction boundary is identified for laminar flamelet library.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.11-20
• /
• 1999

Acoustic pressure response and NO formation of hydrogen-air diffusion flames at various pressures are numerically studied by employing counterflow diffusion flame as a model flame let in turbulent flames in combustion chambers. The numerical results show that extinction strain rate increases linearly with pressure and then decreases, and increases again at high pressures. Thus, flames are classified into three pressure regimes. Such non-monotonic behavior is caused by the change in chemical kinetic behavior as pressure rises. Acoustic pressure response in each regime is investigated based on the Rayleigh criterion. At low pressures, pressure-rise causes the increase in flame temperature and chain branching/recombination reaction rates, resulting in increased heat release. Therefore, amplification in pressure oscillation is predicted. Similar phenomena are predicted at high pressures. At moderate pressures, weak amplification is predicted. Emission index of NO shows similar behaviors as to the peak-temperature variation with pressure.