• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.379-389
• /
• 2014

The purpose of this study is to optimize the patient(examinee) flow in a health examination center via a simulation model and to improve operational efficiency. Two experimentation scenarios were implemented into the simulation model to determine which proposed scenario provides better improvement in terms of the following performance measures: LOS(Length of Stay), staff utilization, and occupancy level. The simulation results demonstrated that there was no significant difference in response results of two scenarios. Although the original motivation of this study was suggest optimal policy for a patient(examinee) flow, the insight into applying simulation in efficiently managing hospital operations is of more value. Simulation approach is a powerful technique that supports efficient decision-making compared to traditional healthcare management approach based on past experience, feelings, and intuition. Therefore, the proposed experimentation model has wide applicability in healthcare systems.

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.311-316
• /
• 2017

Generally assessing bone mineral density (BMD) were performed on dual energy X-ray absorptiometry (DEXA) the same as dual energy CT (DECT) with a rapid-kVp switching. The purpose of this study is to compare the different of BMD value between DEXA and DECT method, and evaluate usefulness of DECT method. Using scanner for BMD measurements were GE, Healthcare Discovery 750 HD for DECT and Hologic QDR 4500W for DEXA. For compare BMD value in each method, scanned lumbar spine phantom and subjects visiting Korean National Cancer Center from April 2015 to December 2015, records of 50 patients. This study was approved by the Institutional Review Board. The mean BMD value measures for spine phantom and for subjects in each scanners presented strong correlation (r=0.948 with p<0.05 for phantom; r=0.635 with p<0.05 and Kendall's tau $({\tau})=0.46$ with p<0.05 for subjects) and linear relationship between DECT and conventional DEXA. DECT technique for BMD measurement will provide a very useful methodology without additional radiation dose.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.323-328
• /
• 2014

ZigBee based on the most vulnerable part of u-Healthcare system that uses the ZigBee communication is the wireless section. ZigBee communication sectors to identify vulnerabilities in this paper, we propose to compensate. ZigBee has been raised from the existing vulnerabilities organize and ZigBee also uses the 64bit address that uniquely identifies a vulnerability that was defined as exposure. And to prevent the exposure of a unique identifying address was used to address a temporary identification. ZigBee security services, the proposed system during the Network Key for encryption only use one mechanism of Residential Mode is used. Residential Mode on all nodes of the entire network because they use a common key, the key is stolen, your network's security system at a time are at risk of collapse. Therefore, in order to guard against these risks to the security policy Network Key updated periodically depending on the method used to. The proposed evaluation and comparative analysis of the system were exposed in the existing system can hide the address that uniquely identifies a public key Network Key also updated periodically, so that leaks can occur due to reduced risk.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.99-107
• /
• 2021

With the recent establishment of a ubiquitous-based medical and healthcare environment, the medical information system for obtaining situation information from various sensors is increasing. In the medical information system environment based on context-awareness, the patient situation can be determined as normal or emergency using situational information. In addition, medical staff can easily access patient information after simple user authentication using ID and Password through applications on smart devices. However, these services of authentication and patient information access are staff-oriented systems and do not fully consider the ubiquitous-based healthcare information system environment. In this paper, we present a authentication service model based context-awareness system for providing situational information-driven authentication services to users who access medical information, and implemented proposed system. The authentication service model based context-awareness system is a service that recognizes patient situations through sensors and the authentication and authorization of medical staff proceed differently according to patient situations. It was implemented using wearables, biometric data measurement modules, camera sensors, etc. to configure various situational information measurement environments. If the patient situation was emergency situation, the medical information server sent an emergency message to the smart device of the medical staff, and the medical staff that received the emergency message tried to authenticate using the application of the smart device to access the patient information. Once all authentication was completed, medical staff will be given access to high-level medical information and can even checked patient medical information that could not be seen under normal situation. The authentication service model based context-awareness system not only fully considered the ubiquitous medical information system environment, but also enhanced patient-centered systematic security and access transparency.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.4
• /
• pp.326-332
• /
• 2021

Swabs are useful and common sampling tools in various research fields, such as medicine, ecology, biotechnology, forensic medicine, and pollutant monitoring systems. Collection reagents are one of the essential components in sampling. It is important to develop a sample collection kit and designate an appropriate storage temperature because samples need to be stored for a long time. The purpose of this study was to identify the effects of three collection reagents and three storage temperatures on the recovery of living bacteria without media. We selected Escherichia coli and Staphylococcus aureus as representative environmental bacteria. Distilled water (DW), phosphate buffered saline (PBS), and Tris-EDTA (TE) buffer were used as collection reagents and stored at 22℃, 4℃, and -70℃ after sampling. The results of using each collection reagent and storage temperature on the bacteria were compared using relative light units (RLU) and the number of colony forming units (CFU). When using -70℃ storage temperature and the TE buffer, the number of living bacteria and the RLU values remained constant. It is therefore recommended that the sample be stored at -70℃ immediately after collection and a TE buffer solution be used as the collection reagent.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.231-241
• /
• 2022

Objectives: The purpose of this study is to evaluate the input status of exposure-related information in the working environment monitoring database (WEMD) and special health examination database (SHED) for the construction of a national exposure surveillance system. Methods: The industrial and process code input status of WEMD and SHED for 21 carcinogens from 2014 to 2016 was compared. Data from workers who performed both work environment monitoring and special health examinations in 2019 and 2020 were extracted and the actual status of input of industrial and process codes was analyzed. We also investigated the cause of input errors through a focus group interview with 12 data input specialists. Results: As a result of analyzing WMED and SHED for 21 carcinogens, the five-digit industrial code matching rate was low at 53.5% and the process code matching rate was 19% or less. Among the data that simultaneously conducted work environment monitoring and special health examination in 2019 and 2020, the process code matching rate was very low at 18.1% and 5.2%, respectively. The main causes of exposure-related data input errors were the difference between the WEMD and SHED process code input systems from 2020, the number of standard process and job codes being too large, and the inefficiency of the standard code search system. Conclusions: In order to use WEMD and SHED as a national surveillance system, it is necessary to simplify the number of standard code input codes and improve the search system efficiency.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.47-54
• /
• 2022

Purpose: This study presents the analysis on space usage of delivery departments in regional public hospitals. The results intention is to achieve improvement of the delivery environment for the mothers and newborns regarding exposure prevention and efficient infection control. The purpose of this study is to provide fundamental data for architectural plans and guidelines for the delivery department. Method: The investigation and analysis were based on research papers, legal systems, public medical statistical data, and the architectural floor plan drawing. For research, 20 regional public hospitals with an operating delivery room were excluded. Regarding data accessibility, 15 regional public hospitals were selected. Results: To overcome the increased vulnerability of the delivery department, the research results of basic data is provided for the establishment to address urgent needs and rapid response. Thus, the research results are as follows: Firstly, the delivery department needs to respond promptly according to the type of patients. For example, in a case of emergency surgery, a connected circulation plan with the related departments is needed. Secondly, for the environment of the delivery area, alleviating anxiety is imperative for pregnant patients and guardians, labor, childbirth, and recovery. Therefore, these needs must be addressed for treatment space and circulation. Lastly, the delivery department is classified into three areas for analysis: access area, treatment area, and support area. In most of the delivery departments of the 15 selected hospitals, there is no space for the access and support area except for the labor and delivery rooms in the treatment area. For the access area, a waiting area, changing room for pregnant women and guardians, and a storage space for contaminated linens are required for infection prevention, safety, and efficiency. For the treatment area, childbirth processes and circulation should have space reserved for labor, delivery, recovery, examination, and treatment. In preparation for an emergency during childbirth, emergency response measures and supporting space needs to be established. For the support area, circulation and rooms are to be designed for medical staff support, activity space, storage and transportation of equipment, and urgent medical treatment. Implications: Along with the low fertility rate and the decrease of medical institutions that operate delivery departments, for the purpose of establishing a public medical service system and a healthy medical environment for mothers and newborns, the researched information demonstrates basic data on space plan of delivery departments in regional public hospitals.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.48-55
• /
• 2022

The color image of the brand comes first and is an important visual element that leads consumers to the consumption of the product. To express more effectively what the brand wants to convey through design, the printing market is striving to print accurate colors that match the intention. In 'offset printing' mainly used in printing, colors are often printed in CMYK (Cyan, Magenta, Yellow, Key) colors. However, it is possible to print more accurate colors by making ink of the desired color instead of dotting CMYK colors. The resulting ink is called 'spot color' ink. Spot color ink is manufactured by repeating the process of mixing the existing inks. In this repetition of trial and error, the manufacturing cost of ink increases, resulting in economic loss, and environmental pollution is caused by wasted inks. In this study, a deep learning algorithm to predict printed spot colors was designed to solve this problem. The algorithm uses a single DNN (Deep Neural Network) model to predict printed spot colors based on the information of the paper and the proportions of inks to mix. More than 8,000 spot color ink data were used for learning, and all color was quantified by dividing the visible light wavelength range into 31 sections and the reflectance for each section. The proposed algorithm predicted more than 80% of spot color inks as very similar colors. The average value of the calculated difference between the actual color and the predicted color through 'Delta E' provided by CIE is 5.29. It is known that when Delta E is less than 10, it is difficult to distinguish the difference in printed color with the naked eye. The algorithm of this study has a more accurate prediction ability than previous studies, and it can be added flexibly even when new inks are added. This can be usefully used in real industrial sites, and it will reduce the attempts of the operator by checking the color of ink in a virtual environment. This will reduce the manufacturing cost of spot color inks and lead to improved working conditions for workers. In addition, it is expected to contribute to solving the environmental pollution problem by reducing unnecessarily wasted ink.

• Research in Community and Public Health Nursing
• /
• v.33 no.1
• /
• pp.13-31
• /
• 2022

Purpose: This study conducted a job analysis of visiting nurses in the process of change. Methods: Participants were the visiting nurses working for the Seoul Metropolitan city. On the basis of the Public Health Intervention Wheel model, two times of the focus group interview (FGI) with seven visiting nurses and one time of the Developing a Curriculum (DACUM) with 34 visiting nurses were performed. A questionnaire survey of 380 visiting nurses was conducted to examine the frequency, importance and difficulty levels of the tasks created by using the FGI and DACUM. Results: Visiting nurses' job was derived as the theme of present versus transitional roles. The present role was categorized as 'providing individual- and group-focused services' and 'conducting organization management', while the transitional role was categorized as 'providing district-focused services' and 'responding to new health issues'. The job generated 13 duties, 28 tasks, and 73task elements. The tasks showed the levels of frequency (3.65 scores), importance (4.27 scores), and difficulty (3.81 scores). All the tasks were determined as important, exceeding the average 4.00 scores. The group- and district-focused services of the tasks were recognized as more difficult but less frequent tasks. Conclusion: The visiting nurses exert both present and transitional roles. The transitional roles identified in the present study should be recognized as an extended role of visiting nurses in accordance with the current changing healthcare needs in South Korea. Finally, the educational curriculum for visiting nurses that reflects the transitional roles from the present study is needed.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.5
• /
• pp.467-474
• /
• 2023

Objectives: Diabetes mellitus (DM) is a serious public health issue that places a heavy financial, social, and health-related burden on individuals, families, and healthcare systems. Self-reported health-related quality of life (HRQoL) is extensively used for monitoring the general population's health conditions and measuring the effectiveness of interventions. Therefore, this study investigated HRQoL and associated factors among patients with type 2 DM at a primary healthcare center in Indonesia. Methods: A cross-sectional study was conducted in Klaten District, Central Java, Indonesia, from May 2019 to July 2019. In total, 260 patients with DM registered with National Health Insurance were interviewed. HRQoL was measured with the EuroQol Group's validated Bahasa Indonesia version of the EuroQoL 5-Dimension 5-Level (EQ-5D-5L) with the Indonesian value set. Multivariate regression models were used to identify factors influencing HRQoL. Results: Data from 24 patients were excluded due to incomplete information. Most participants were men (60.6%), were aged above 50 years (91.5%), had less than a senior high school education (75.0%), and were unemployed (85.6%). The most frequent health problems were reported for the pain/discomfort dimension (64.0%) followed by anxiety (28.4%), mobility (17.8%), usual activities (10.6%), and self-care (6.8%). The average EuroQoL 5-Dimension (EQ-5D) index score was 0.86 (95% confidence interval [CI], 0.83 to 0.88). In the multivariate ordinal regression model, a higher education level (coefficient, 0.08; 95% CI, 0.02 to 0.14) was a significant predictor of the EQ-5D-5L utility score. Conclusions: Patients with diabetes had poorer EQ-5D-5L utility values than the general population. DM patients experienced pain/discomfort and anxiety. There was a substantial positive relationship between education level and HRQoL.