• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.6-11
• /
• 1989

Some distinctive defects in the conventional stow net were examined and presented in the previous report of this series. To find out the more effective gear by correcting the defects, the authors carried out another experiment by using a newly designed gear. 1. Special features of the newly designed gear are: (1) stretched width of front end on top, bottom and side panel are decreased 20%, on the other hand, the frank of the panels are increased 10% compared with the conventional gear. Front end of top and bottom panels are bias cutten up to 20% of the length of panels. (2) Length of the head rope and ground rope are shortened 6% by changing of the shape of the top and bottom panels. (3) Lacing lines are attached to four longitudinal seaming lines with suitable hanging ratio. (4) Stretched height of the shearing device were shortened 17%, and the buoyancy on top of the device were increased 20%. (5) Length of the biforked pendants were arranged to be shorter on top-most and bottom-most ones, and loner on middle ones. 2. The observed result can be expressed as (1) Wrinkles in the front end of top panels are removed and fringe line of panels become smooth. (2) Opening height of mouth is observed 3% higher than that of the conventional gear. (3) Opening width is 1.5 to 1.6 times wider than that of the conventional gear. (4) Hydrodynamic resistance is decreased 10%-17%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.407-419
• /
• 2006

Situations where support is provided solely in shaft resistance of drilled shafts are where the base of the drilled hole cannot be cleaned so that it is uncertain that any end bearing support will be developed. Alternatively, where sound bed rock underlies low strength overburden material, it may be possible to achieve the required support in end bearing on the rock only, and assume that no support is developed in the overburden. However, where the drilled shaft is drilled some depth into sound rock, a combination of side wall resistance and end bearing can be assumed. Both theoretical and field studies of the performance of rock socketed drilled shafts show that the major portion of applied load is usually carried in side wall resistance. Normal stress at the rock-concrete interface is induced by two mechanisms. First, application of a compressive load on the top of the pile results in elastic dilation of the concrete, and second, shear displacement at the rough surface of the drilled hole results in mechanical dilation of the interface. If the stiffness of the material surrounding the socket with respect to normal displacement is constant, then the normal stress will increase with increasing applied load, and there will be a corresponding increase in the shear strength. In this study, the numerical analyses are carried out to investigate the behavioral characteristics of side of rock socketed drilled shafts. The cause of non-linear head load-settlement relationship and failure mechanism at side are also investigated properly and the design charts are suggested and verified for the leading to greater efficiency and reliability in the pile design.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.86-94
• /
• 2004

This study was conducted to mesh selectivity of Beam trawl for shrimps fishing experiment in the coastal waters around Geomundo, South sea of Korea, during from Oct. to Nov. 2002. The selectivity parameters of big head shrimp (Solenocera melantho) have been studied on the covered con-end method. with mesh of 8, 38, 51 and 61 mm. Selection curves and selection parameters were calculated by using a logistic function S=1/(1+exp-(aCL+b)). The mesh selection master curves were estimated by S=1/(1+exp$^{({\alpha}(CL/M)+{\beta}}$), and the optimum mesh size were calculated with (L/M)50 of master curve. Optimum mesh size and selectivity master curves for the southern rough shrimp (Yrachysalambria curvirostris) and smoothshell shrimp (Parapenaeopsis tenella) optimum mesh size and selectivity master curves were estimated by big head shrimp master curves. The results obtained are summarized as follows : Selection parameters '${\alpha}$' and '${\beta}$' of the master curve for big head shrimp were 8.84 and -5.89, and The selection factor of the master curve (L/M)$_{50}$ was 0.67. The optimum mesh size of minimum length for sexual maturity for big head shrimp was 30.7 mm. Estimated (L/M)$_{50}$ for southern rough shrimp and smoothshell shrimp by using the master curve of big head shrimp was 0.73 and the optimum mesh sizes were 25.5 mm for southern rough shrimp and 16.9 mm for smoothshell shrimp, respectively.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.3
• /
• pp.28-36
• /
• 2009

While existing literature has focused extensively on the strengths and weaknesses of the Chaebol and their ownership and governance, there have been few studies of Korean non-Chaebol firms. However, Lee, Lee and Pennings (2001) did not specifically investigate the competitive strategies that non-Chaebol firms use to survive against the Chaebol in the domestic Korean market. The motivation of this paper is to document, through four exploratory case studies, the successful competitive strategies of non-Chaebol Korean companies against the Chaebol and then offer some propositions that may be useful to other entrepreneurial firms as well as public policy makers. Competition and cooperation as conceptualized by product similarity and cooperative inter.firm relationship respectively, are major dimensions of firm.level marketing strategy. From these two dimensions, we develop the following $2{\times}2$ matrix, with 4 types of competitive strategies for non-Chaebol companies against the Chaebol (Fig. 1.). The non-Chaebol firm in Cell 1 has a "me-too" product for the low-end market while conceding the high-end market to a Chaebol. In Cell 2, the non-Chaebol firm partners with a Chaebol company, either as a supplier or complementor. In Cell 3, the non-Chaebol firm engages in direct competition with a Chaebol. In Cell 4, the non-Chaebol firm targets an unserved part of the market with an innovative product or service. The four selected cases such as E.Rae Electronics Industry Company (Co-exister), Intops (Supplier), Pantech (Competitor) and Humax (Niche Player) are analyzed to provide each strategy with richer insights. Following propositions are generated based upon our conceptual framework: Proposition 1: Non-Chaebol firms that have a cooperative relationship with a Chaebol will perform better than firms that do not. Proposition 1a; Co-existers will perform better than Competitors. Proposition 1b: Partners (suppliers or complementors) will perform better than Niche players. Proposition 2: Firms that have no product similarity with a Chaebol will perform better than firms that have product similarity. Proposition 2a: Partners (suppliers or complementors) will perform better than Co.existers. Proposition 2b: Niche players will perform better than Competitors. Proposition 3: Niche players should perform better than Co-existers. Proposition 4: Performance can be rank.ordered in descending order as Partners, Niche Players, Co.existers, Competitors. A team of experts was constituted to categorize each of these 216 non-Chaebol companies into one of the 4 cells in our typology. Simple Analysis of Variance (ANOVA) in SPSS statistical software was used to test our propositions. Overall findings are that it is better to have a cooperative relationship with a Chaebol and to offer products or services differentiated from a Chaebol. It is clear that the only profitable strategy, on average, to compete against the Chaebol is to be a partner (supplier or complementor). Competing head on with a Chaebol company is a costly strategy not likely to pay off for a non-Chaebol firm. Strategies to avoid head on competition with the Chaebol by serving niche markets with differentiated products or by serving the low-end of the market ignored by the Chaebol are better survival strategies. This paper illustrates that there are ways in which small and medium Korean non-Chaebol firms can thrive in a Chaebol environment, though not without risks. Using different combinations of competition and cooperation firms may choose particular positions along the product similarity and cooperative relationship dimensions to develop their competitive strategies-co-exister, competitor, partner, niche player. Based on our exploratory case-study analysis, partner seems to be the best strategy for non-Chaebol firms while competitor appears to be the most risky one. Niche players and co-existers have intermediate performance, though the former do better than the latter. It is often the case with managers of small and medium size companies that they tend to view market leaders, typically the Chaebol, with rather simplistic assumptions of either competition or collaboration. Consequently, many non-Chaebol firms turn out to be either passive collaborators or overwhelmed competitors of the Chaebol. In fact, competition and collaboration are not mutually exclusive, and can be pursued at the same time. As suggested in this paper, non-Chaebol firms can actively choose to compete and collaborate, depending on their environment, internal resources and capabilities.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.197-210
• /
• 2003

The non-float midwater pair trawl was effective in the mouth opening and control of the working depth in midwater and bottom. In contrast, we confirmed that it was difficult to keep the net at surface above 30 m of the depth by means of the full scale experiment in the field and the model test in the circulation water channel. To solve this problem, the kites were attached to the head rope of the non-float midwater pair trawl. In this study, four kinds of the model experiments were carried out with the purpose of applying the kite to the korean midwater pair trawl. The results obtained can be summarized as follows: 1. The working depth of the non-float midwater pair trawl with the kite was shallower than that of the proto type and non-float type. The working depth of the kite type was approximately 20m with 2 kites and about 5m with 4 kites under 4.0 knot. The working depth was almost constant but the depth of the head rope sank approximately 15m and 10m according to the increase in the front weight and the wing-end weight, respectively. The changing aspect of the working depth was constant, but the depth of the head rope sank approximately 22m according to the increase in the lower warp length (dL). 2. The hydrodynamic resistance of the kite type was almost increased in a linear form in accordance with the flow speed increase from 2.0 to 5.0 knot. The increasing grate of the hydrodynamic resistance tended to increase in accordance with the increase in flow speed. The hydrodynamic resistance of the kite type was larger approximately 5～10 ton larger than that of the non-float type and the proto type. The hydrodynamic resistance of the kite type increased approximately 3ton with the changing of the front weight from 1.40 to 3.50 ton and approximately 4 ton with the changing of the wing-end weight from 0 to 1.11 ton and approximately 5.5 ton with the changing lower warp length (dL) from 0 to 40 m, respectively. 3. The net height of the kite type was increased approximately 10 m with the change in the kite area from $2,270mm^2$ to 4,540 $\textrm{mm}^2$. The net height of the kite type was aproximately 50 m and 30 m larger than that of the proto type and the non-float type, respectively. The changed aspect of the net width was approximately 5m with the variation of the flow speed from 2.0 to 5.0 knot. 4. The filtering volume of the kite type was larger than that of the proto type and the non-float type by 28%, 34% at 2.0 knot of the flow speed and 42%, 41% at 3.0 knot, and 62%, 45% at 4.0 knot, and 74%, 54% at 5.0knot, respectively. The optimal towing speed was approximately 3.0 knot for the proto type and was over 4.0 knot for the non-float type, and the optimal towing speed reached 5.0 knot for the kite type. 5. The opening efficiency of the kite type was approximately 50% and 25% larger than that of the proto type and the non-float type, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.189-196
• /
• 2003

In this study, the vertical opening of the non-float midwater pair trawl net was maintained by controlling the length of upper warp. This was because the head rope was able to be kept linearly and the working depth was not nearly as changed with the variation of flow speed as former experiments in this series of studies have demonstrated. We confirmed that the opening efficiency of the non-float midwater pair trawl net was able to be developed according to the increase in front weight and wing-end weight. In this study, we described the opening efficiency of the non-float midwater pair trawl net according to the variation of front weight and wing-end weight obtained by model experiment in circulation water channel. We compared the opening efficiency of the proto type with that of the non-float type. The results obtained can be summarized as follows：1. The hydrodynamic resistance was almost increased linearly in proportion to the flow speed and was increased in accordance with the increase in front weight and wing-end weight. The increasing rate of hydrodynamic resistance was displayed as an increasing tendency in accordance with the increase in flow speed. 2. The net height of the non-float type was almost decreased linearly in accordance with the increase in flow speed. As the reduced rate of the net height of the non-float type was smaller than that of the net height of the proto type against increase of flow speed, the net height of the non-float type was bigger than that of the proto type over 4.0 knot. The net width of the non-float type was about 10 m bigger than that of the proto type and the change rate of net width varied by no more than 2 m according to the variation of the front weight and wing-end weight. 3. The mouth area of the non-float type was maximized at 1.75 ton of the front weight and 1.11 ton of the wing-end weight, and was smaller than that of the proto type at 2.0∼3.0 knot, but was bigger than that of the proto type at 4.0∼5.0 knot. 4. The filtering volume was maximized at 3.0 knot in the proto type and at 4.0 knot in the non-float type. The optimal front weight was 1.40 ton.

• Nuclear Engineering and Technology
• /
• v.18 no.3
• /
• pp.200-208
• /
• 1986

The loss of coolant accident based on a double-ended cold leg break is analyzed with the discharge coefficient (Ca) of 0.4. This analysis covers the whole transient period from the start of depressurization to the complete refilling of the core by using RELAP4/MOD6-EM and RELAP4/ MOD6-HOT CHANNEL for the system thermal-hydraulics and the fuel performance during the blowdown phase respectively, and RELAP4/MOD6-FLOOD and TOODEE2 during the reflood phase. A simple analytical method has been developed to account for the lower plenum filling by approximating steam-water countercurrent flows and superheated wall effects at the downcomer during the refill period. Based on the informations. at the time of EOB (end-of-bypass), the refill duration time and the initial reflooding temperature were estimated and compared with the results from the RELAP4/MOD6, resulting in a good agreement. In addition, some parametric studies on the EOB were performed. The form loss coefficient between upper head and upper downcomer was found to be sensitive to the occurrence of the spurious EOB. Appropriate form loss coefficients should be taken into account to avoid the flow oscillations at the downcomer. The analyses with the six and three volume core nodalizations, respectively, show much similar trends in the system thermal-hydraulic performance, but the former case is recommended to obtain good results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1469-1474
• /
• 2003

Twenty four weaner lambs, eight each of Marwari, Patanwadi and Merino${\times}$Patanwadi breeds (9.9 to 10.8 kg) were randomly divided into two dietary treatments on body weight basis Viz. $T_1$-conventional (Maize-38%, GN Cake-25%, Rice Polish-24%, Jaggery solution-10%, Mineral mixture-3%) and $T_2$-supplemented non conventional group (GN Cake-25%, Rice Polish-14%, Mango seed kernel-25%, Babul Pods chuni-23%, Jaggery solution-10%, Mineral mixture-3%). The Jaggery solution was prepared by mixing 6.5 kg Jaggery and 3.5 kg water. The average final body weight at the end of the experiment was recorded to be $19.33{\pm}0.76$ and $19.72{\pm}0.8kg$ in conventional and non-conventional groups, respectively. The total dry matter intake (DMI) during the entire experiment period was recorded to be $89.56{\pm}5.19$ and $95.08{\pm}1.06$ (kg/head) and $532.83{\pm}9.94$ and $566.75{\pm}10.49g/d$ in conventional and nonconventional groups, respectively. The body weight gain and body measurements did not influenced by diet. The ration effect was found to be significant when the DMI was expressed in terms of g/d. The crude protein (CP) and digestible crude protein (DCP) intake/head and per kg gain observed during experiment under conventional and non-conventional treatment group did not differ from each other. However, the total digestible nutrients (TDN) intake per kg gain was significantly (p<0.05) higher in supplemented non-conventional group. The intake values of DCP and TDN were more or less in agreement with Indian Council Agricultural Research (1985) recommendations. The estimated total feed cost (Rs./animal) for experimental lambs was $274.16{\pm}8.57$ and $242.67{\pm}5.10$ in conventional and non- group, respectively. The non-conventional group had significantly (p<0.05) lower feed cost (11.6%). The return as percent of feed cost and feed cost/kg dressed weight were $92.89{\pm}5.58$ (%) and Rs. $35.40{\pm}1.11$ and $122.61{\pm}5.06$ (%) and Rs.$30.47{\pm}1.71$ in conventional and non-conventional group (p<0.05), respectively which is the reflection of significantly lower total feed cost incurred during feeding in non-conventional group. Lambs fed non-conventional based diet had similar live weights as those fed conventional diets but costed less money to achieve those weights.

• Korean journal of applied entomology
• /
• v.49 no.1
• /
• pp.11-16
• /
• 2010

Measurements were made on morphology of each developmental stages of the chestnut weevil, Curculio sikkimensis, reared in the laboratory and field from 2003 to 2006. The size of egg was 0.8${\pm}$0.03 mm. The escaping larvae were measured, in average, as 98 mg in body weight, 10.65 and 3.99 mm in body length and width, and 1.70 mm in head width. Pupal size of female and male was 7.01 and 6.53 mm, respectively. The fresh weight (0.343 g), body length (7.76 mm) and width (3.38 mm), and head width (1.60 mm) of female adults were significantly bigger than those (0.268 g, 7.14 mm, 3.01 mm and 1.37 mm, respectively) of male adults. Proboscis length (6.53 mm) and antennal length (5.47 mm) of female was also significantly longer than those (3.56 and 4.63 mm, respectively) of male. The larvae of C. sikkimensis overwintered for 1~3 years and their body weight, body length, and body width were decreased. The ratio between proboscis length and body length, the basipodite position attached to the proboscis, and shape of the sex organ on the abdominal end could be used to discriminate sexes.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2009

Purpose : This study aims to investigate into the change in muscle power, pain and muscle tension upon application of extracorporeal shock wave therapy (ESWT) and ultrasound (US) at trigger point (TrP) of the Scapular inter angle. Methods : In total of 24 human subjects that experience pain upon stimulation at the scapular inter angle were recruited. They were divided into three groups: control, ESWT and US group. Each group was subjected to appropriate stimulation three times per week for four weeks except the control group which had no restrictions in lifestyle. The ESWT group was subjected to Extracorporeal Shock Wave Therapy with a 2 $cm^2$ head, 20 times at speed of application of 60 pulses/min and depth of intrusion of 25 mm Whereas the US group was subject to Ultra sound therapy with 1$cm^2$ head, 1 MHz in frequency, 1.5 W/$cm^2$ of strength with five minutes of continuous application. Measurements were performed immediately prior to and at the end of the experiment. Results : There was no statistical significance in the change in muscle tension and muscle power as well as the difference between both groups before and after the experiment. VAS and VRS, all of which indicates changes in pain level, had statistically significant differences between them in pretest posttest comparisons. However, ESWT was superior to US in terms of decreasing muscle tension and pain while increasing muscle power. Conclusion : This study has made it evident that ESWT is far more reasonable to apply to TrP.