• International Journal of Fluid Machinery and Systems
• /
• v.2 no.2
• /
• pp.172-178
• /
• 2009

This paper reports on an investigation (using RSM with commercial CFD software) of the performance characteristics of the impeller in a centrifugal pump. Geometric parameters of vane plane development were defined with the meridional shape and frontal view of the impeller. The parameters are focused on the blade-angle distributions through the impeller in a fixed meridional geometry. For screening, a $2^k$ factorial design has been used to identify the important design parameters. The objective functions are defined as the total head rise and the total efficiency at the design flow-rate. From the $2^k$ factorial design results, it is found that the incidence angles and the exit blade angle are the most important parameters influencing the performance of the pump.

• Journal of Aquaculture
• /
• v.13 no.1
• /
• pp.9-12
• /
• 2000

A species of the parasitic copepods Phrixcephalus unbellatus (Lernaeide ; Cyclopoidea) from Branchiostegus japonicus is described and reported for the first time in Korea. The parasite was recovered from the eye of host. P. umbellatus was easily identified by the body shape extensive ramification of the antennal processes and numerous branches on the thoracic horns, The parasite inserted its head and the anterior portion of thorax up to the 4th segment in the eye ball of the host through a narrow hole which it usually burrowed near the upper margin of the cornea above the crystalline lens. Prevaklence of the parasite increased from 3.3% January to 11.9% in June.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.37-44
• /
• 1993

Deck wetness phenomenon has long been considered as one of the factors that degrade the performance of a ship In waves. In rough weather, the frequent skipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow shape design is an important asset to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper an experimental technique for estimation of deck-wetness frequency is presented. The results of the model tests are compared with those of computations using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1303-1308
• /
• 2008

This paper presents effects of impeller geometrical parameters on the performance of a centrifugal pump impeller. The effects of meridional parameters and vane plane development parameters on the performance of the impeller were numerically studied using a commercial CFD code and DOE(design of experiments) software. Geometrical parameters in a method of meridional view and vane plane development were selected and defined to generate the 3D impeller shape. The response variables are defined in a total head and efficiency curve with flow rate. The influences of selected design variables on the various objective functions were examined as a result of the calculation using 2k factorial.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.184-187
• /
• 2005

In this paper, the transducer instead of mechanical dynamic structure was used to generate ultrasonic wave and the horn-shape amplifier was utilized to solve the energy decaying problem of ultrasonic wave with propagating it through the media. The analyses of ultrasonic wave and a fluid for the selected structure of a cleaning head were carried out Based on simulator results, the distance between a horn and the substrate of 4 mm and the horn diameter of 10 mm were determined to maximize the energy of ultrasonic waves. The cool ins structure was also considered to reduce the heat from the transducer and the horn.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.159-166
• /
• 2005

It is not difficult to see the road repairing. There are many and various machines which crush road surface. The efficiency and power of the machine depend on crushing head-shape, crushing interval, crushing load, crushing stress, machine's dropping height and roller's kind. The objective of this study is to select the optimal model among ten models of crushing machine with constraints such as crushing depth, variation, and crushed particle size. And then this paper provides the valid theoretical base on selected model. The data for this study are chosen from the site of construction in Kangnung during three months (2004. 6. 1${\~}$2004. 8. 31). The provided methodology in this paper will be fruitful not only for the selection of crushing machine but also for the aspects of construction period, cost, work efficacy according to the condition from the various sites of construction.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1981-1986
• /
• 2004

A cross-flow fan relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice and blades have a forward curved shape. Therefore, the performance of a cross-flow fan is influenced 25% by the impeller, 60% by the rearguider and the stabilizer, 15% by the heat exchanger. At the low flow rate, there exists a rapid pressure head reduction, a noise increase and an unsteady flow against a stabilizer and a rearguider. Moreover, it is difficult to analyze the reciprocal relations of the cross-flow fan because each parameter is independent. Numerical analyses are conducted with different starting angles of the rearguider. Two-dimensional, unsteady governing equations are solved, using FVM, PISO algorithm, sliding grid system and ${\kappa}-{\varepsilon}$ standard turbulence model.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1848-1857
• /
• 2016

In order to discriminate the morphologically analogous smallscale blackfish, Girella leonina and largescale blackfish, G. punctata, various methods were used by using biometric and geometric approaches. Morphometric analysis showed considerable 19 differences of total 44 morphometric dimensions: classical dimension 1 part; truss dimension 12 parts; and head part dimension 6 parts (P < 0.05). Some differences of morphological features primarily involved in caudal part of truss dimension. Our results of this study confirmed that two species adequately can distinguish with external body shape, and we hope that the results of our study could be used to identify in Girellidae family as taxonomical parameters.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.125-130
• /
• 2004

It is not difficult to see the road repairing. There are many and various machines that can crush road surface. The efficiency and power of the machine depend on crushing head-shape, crushing interval, crushing load, crushing stress, machine's dropping height and roller's kind. The objective of this study is to select the optimal model among ten models of crushing machine with constraints such as crushing depth, variation, and crushed particle size. The data for this study are chosen from the site of construction in Kangnung during three months ($2004.\;6.\;1\;\sim\;2004.\;8.\;31$). The provided methodology in this paper will be fruitful not only for the selection of crushing machine but also for the aspects of construction period, cost, work efficacy according to the condition from the various sites of construction.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.2 no.1
• /
• pp.39-49
• /
• 1996

The techniques of joint mobilization and traction are used to improve joint mobility or to decrease pain by restoring accessory movements to the shoulder joints and thus allowing full, nonrestriced, pain-free range of motion. In the glenohumeral joint, the humeral head would be the convex surface, while the glenoid fossa would be the concave surface. The medial end of the clavicle is concave anterioposteriorly and convex superioinferiorly, the articular surface of the sternum is reciprocally curved. The acromioclavicular joint is a plane synovial joint between a small convex facet on lateral end of the clavicle and a small concave facet on the acromion of the scapula. The relationship between the shape of articulating joint surface and the direction of gliding is defined by the convex-concave rule. If the concave joint surface is moving on a stationary convex surface, gliding occur in the same direction as the rolling motion. If the convex surface is moving on a stationary concave surface, gliding will occur in an opposite direction to rolling. Hypomobile shoulder joint are treated be using a gliding technique.