• 복식문화학회:학술대회논문집
• /
• 복식문화학회 2004년도 International Conference
• /
• pp.75-76
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.50-50
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.30-32
• /
• 1994

In this paper, in order to design Linear Pulse Motor(LPM) effectively, the flux density and the thrust force of LPM have been calculated in the air gap by using Finite Element Method(FEM). The kinds of magnetic circuit arc the variable reluctance(VR), hybrid(HB), and permanent magnet(PM) type. Tooth and slot shape arc rectangular, wedge head(tapcr; 10, 20 degree), and semi-circle type.

• 소성∙가공
• /
• 제20권5호
• /
• pp.357-361
• /
• 2011

A beryllium copper alloy(C1720) sheet was stretch-drawn using different processes. A hemispherical punch was first used and the forming behavior was examined. Then, cylindrical cups with a hemispherical head were produced by either one-step drawing or two-step forming(sequential stretch forming-drawing). The one-step drawing showed the better formability than two-step forming. However, the two-step forming was the superior process in terms of attaining shape accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.233-234
• /
• 2011

• Animal Systematics, Evolution and Diversity
• /
• 제22권2호
• /
• pp.149-151
• /
• 2006

The larval stage of Ceraclea labulata (Martynov) is described for the first time. The larva can be distinguished from other known larvae of Korean Ceraclea by the absence of head marking and by the shape of frontoclypeus, which is equal in anterior and posterior width. The larval case is also described. Line-drawings of key characters and discussion on Korean Ceraclea are provided.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.30-35
• /
• 2009

We have investigated the characteristics of a superconductive Pb shield for hemispherical shape and plate to improving signal-to-noise ratio(SNR) of biomagnetism. We measured the shielding factor for the position of helmet shape Pb and for changing the distance from Pb surface. To make a uniform magnetic field, a $1.5m{\times}1.5m$ set of the helmholtz coils activated at several frequencies. The shielding factor of hemispherical shape Pb was from 20 to 57 dB and of Pb plate was about $6{\sim}26dB$ as a function of distance from the lead surface. The shielding factor was rapidly reduced as increasing the distance from Pb surface. The white noise of superconductive quantum interference device(SQUID) with a superconductive shield was about $12fT/Hz^{1/2}$ at 1 Hz, $7fT/Hz^{1/2}$ at 100 Hz. The white noise was more increased about two times than conventional SQUID system without Pb shielding. An auditory signal was measured by first order gradiometer and magnetometer with Pb superconductive shield and compared the SNR. The SQUID system with Pb shield had better performance at low frequency noise level.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.969-975
• /
• 2013

While accelerating, bicycle frames are subject to torsion forces and deformation. In this study, bicycle frame durability was evaluated by using structural, fatigue, and vibration experiments. Three types of models were designed by changing the frame configurations according to the shape and direction of a bicycle frame design. Because maximum equivalent stress was greatest at the saddle and at connected parts in Models 1, 2, and 3, these frame sections were most vulnerable to failure. Model 2 was the least safe, due to the increased total deformation and equivalent stresses in the top tube horizontal to the ground. Based on vibration and fatigue analysis results, Model 2 was also determined to be the least safe frame, because the head tube was placed slightly higher above the seat tube and inclined to $10^{\circ}$. These study results can be utilized in the design of bicycle frames by investigating prevention and durability against damage.

• 한국해안해양공학회지
• /
• 제2권4호
• /
• pp.223-230
• /
• 1990

해상공사를 하므로써 발생하는 현탁물질은 공사 주변 환경변화에 많은 영향을 미치고 있다. 그러므로 해역에서 토사투하에 따른 탁수괴의 거동을 규명하는 것은 대단히 중요하다. 토사투하할 때 일어나는 유동은 퇴적현상에 영향을 미친다고 생각되어, 탁수괴의 낙하특성과 퇴적형상과의 관련성에 대하여 실험하였다. 탁수괴의 높이 변화, 길이 변화, 이동속도 변화, 탁수괴 선단부의 이동시간, 탁수괴의 운행계수, 현상계수, 토사의 퇴적형상에 대해서 알아보았다. 그 결과, 토사투하의 거동은 토사투하량이 투하토사 입경에 비하여 많을 경우 대기권에서 일어나는 난류 Thermal 현상과 유사하다는 것을 알았다. 따라서 토사투하시의 유체역학적 지배방정식은 난류 Thermal 이론으로 대신할 수 있다는 것을 알았다.

• 수산해양기술연구
• /
• 제29권4호
• /
• pp.292-300
• /
• 1993

Acoustical imaging has made brilliant progress in the medical science field, and has also made much progress in the nondestructive testing and under water acoustics applications since doctor Dussik brother has studied about possibilities of making images of brain by recording variations in the intensity of ultrasonic beam from head in 1937. In this paper an acoustical image is reconstructed with the power spectra analysed by impulse ultrasound wave generated by electrodynamic transducer(EDT). The EDT generates the impulse ultrasound of 77KHz in center frequency and 120KHz in bandwidth at -20dB by 1200V exciter in this experiment. The impulse ultrasound has the dominant frequency components of 47KHz, 177KHz, 110KHz and 155KHz. The U shape object is adopted in making an acoustical image. The resulted spectral acoustical images are different from the optical view of the U shape object. However the image reconstructed from 110KHz spectrum is very similar to the original optical shape of the object. Even KHz level impulse sound of 70$\mu$sec pulse width is found to be useful in reconstructing acoustical imaging improvement.