• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.53-57
• /
• 2008

The experiment was carried out to select the rice cultivar adaptable to Top Rice cultivation region from 2006 to 2007 in Useong and Kyeongju, Korea. Four cultivars, recommended for high rice grain quality, were cultivated in the different region in this study. The average yield of head rice was higher in Samguangbyeo than the other three cultivars. The protein content was inversely associated with palatability (Toyo value). The protein content of Samguangbyeo was 6.2%, which was the lowest among the tested cultivars. L values in color of rice and cooked rice were not significantly different. The hardness of Samguangbyeo was lower than that of the other cultivars in texture properties of boiled rice on 4 cultivars. In conclusion,considering the rice yield and grain qualities, Samguangbyeo was selected as promising rice cultivar for Top Rice cultivation region.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.235-241
• /
• 2016

Three different transplanting dates for two rice cultivars grown in Daegu, Republic of Korea, were examined to identify the changes in growth, rice quality, and characteristics of amylopectin. An early transplanting date caused a reduction in the number of panicles in both rice cultivars compared to that in the optimal and late transplanting dates. The 1000-grain weight in the two rice cultivars was significantly increased in the late transplanting date. The rice cultivar tolerant to high temperatures, Donganbyeo, exhibited the lowest milky grain rate in the late transplanting date. The highest rate of head grain was observed in the late transplanting date in both rice cultivars. Regarding the pattern of pasting properties, peak viscosity increased with delayed transplanting dates. With respect to changes in the amylopectin branch-chain length distribution, the amylopectin structure of the translucent Dongan rice cultivar transplanted on April 25 was characterized by a significant increase in A chains with DP > 12, and a decrease in long chains $DP{\geq}37$ compared to that transplanted on June 25. In contrast, the amylopectin structure of the chalky Dongan rice cultivar transplanted on April 25 exhibited further decrease in 13 < DP < 19 than that transplanted on June 25. In the Ungwang rice cultivar, the amylopectin structure of the translucent Ungwang rice cultivar transplanted on April 25 and June 25 was characterized by a significant decrease in the lengths of total amylopectin chains. Furthermore, the amylopectin structure of the chalky Ungwangbyeo rice cultivar transplanted on April 25 was characterized by a significant increase in 7 < DP < 30, while a significant decrease was observed in that transplanted on June 25. These results indicate that the amylopectin structure is altered by different transplanting dates depending on the characteristics of the rice cultivar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.47-52
• /
• 2008

This study was carried out to improve the rice grain quality of Ilpum cultivar, especially to reduce the chalky rice rate by controlling top dressing of nitrogen application ratio at the tillering and panicle initiation stage. In the rice plant growth, the number of tiller and leaf area index of maximum tillering stage were influenced by basal dressing and top dressing at tillering stage; however those of heading stage were mainly influenced by top dressing at panicle initiation stage. In yield and yield components, they were influence by the top dressing at panicle initiation stage and the rice yield was increased by percentage of the top dressing. The protein content of rice grain was increased as the rate of top dressing at panicle initiation stage was increased. The rate of chalky and damaged rice was remarkably increased as the top dressing ratio was increased, resulting in reducing the rate of head rice rate. As the results, the characteristics of milling and rice quality was improved when the amount of top dress was reduced as 50% at the panicle initiation stage, and the yield of head rice also increased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.192-197
• /
• 2009

This study was conducted to investigate the effect of site-specific variable fertilization following digital fertility map generated from soil analysis on rice growth and yield. The site-specific application of fertilizer was implemented by using rice transplanter equipped with side dressing applicator and global positioning system (GPS). Coefficient of variation (C.V.) of soil nitrogen content was reduced after the experiment, and spatial variation of semivariogram was reduced. Rice growth from tillering to ripening stage, plant height, tiller and panicle number increased at site-specific variable fertilization treatment, and coefficient variation (C.V.) of each growth characteristics was lower than those of conventional fertilization treatment. As a result, fertility in the rice field was more uniform become of site-specific fertilizer application. Head rice yield of site-specific application plot increased by 9% (i.e., to from 450 kg/10a to 492 kg/10a of the control plot) and its CV was significantly reduced to 3.5 compared to 7.8 of the control plot. In addition, there was no significant difference in amylose, protein contents and whiteness of milled rice, but its CV was reduced.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.327-331
• /
• 2006

This study was carried out to determine the economic injury level of the rice leaffolder,Cnaphalocrocis medinalis G.. The damage aspects of rice plant (at tilling stage) by leaf folders at different larval density per plant were studied in pot experiment (24 cm in diameter, 18 cm in height). One leaf folder consumed 6-7 leaves during larval stage. The damage by leaf folders was simulated by cutting off 0, 10, 30, 50, 70, and 90% of leaves before and after heading stage July 15th (at panicle initiation stage) and August 15th (at milk stage), respectively. When leaves were cut before the heading of rice, the linear relationships between the leaf cutting rate (X) and each factors of yield (Y) were as following; for grain maturity it was Y = -9.379X + 83.630 ($R^{2}=0.493$),\;Y = 0.139X + 0.490 ($R^{2}=0.925$) for yield, and Y = -4.880X + 81.116 ($R^{2}=0.665$) for head rice. When leaves were cut after the heading of rice, it was Y = -23.0l4X + 83.589 ($R{2}=0.915$), for grain maturity, Y=0.141X + 3.466 ($R^{2}=0.842$) for yield, and Y = -13.795X + 81.964 ($R^{2}=0.898$) for head rice. We found that when leaf cutting after the heading stage caused more damage than before the heading in terms of yield and yield components. Based on theses results the economic threshold level was estimated to be 30% and 7% leaf loss before and after heading stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.70-75
• /
• 2010

In Korea, standard N application level was amended from 110 to 90kg per ha for high quality rice production in 2005. So far, N application method, however, has not been considered for yield and quality based on changed standard N application level. Therefore, this experiment was conducted to find out more efficient N application method for improving rice quality or labor saving under the amended standard N application level with several varieties at three site (Suwon, Iksan, and Milyang) for two years from 2005 to 2006. Top dressing of N at 15 days before heading compared to the standard (25 days before heading) showed improved rice qualities such as 1000 grain weight and head rice ratio without changing rice yield and protein content of brown rice. In addition, there were no significant differences in yield and quality between different N split application of 70-0-30% and 50-30-20%, indicating that the former would be useful for labor saving without yield decrease and quality deterioration.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.119-128
• /
• 2017

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods. The required time for seed emergence was for 8~ 9days in the tested direct seeding methods and there was high in seedling establishment according to wet hill-seeding with iron-coated seeds> wet hill-seeding with soil coverage>water seeding with iron-coated seeds and water seeding with pregerminated seeds as the conventional treatment. The rice plant height was taller in wet hill-seeding methods than that of water seeding with broadcasting method but there was not significant difference in terms of statistical analysis at 75day after seeding except the water seeding with pregerminated seeds. The growth of tiller number in the rice plant was highest in water seeding with iron-coated seeds. The milled rice yield was highest in water seeding with iron-coated seed being with 6.4t/ha and percentage of head rice was the highest in wet hill-seeding and water seeding with iron-coated seeds.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2002.05a
• /
• pp.53-57
• /
• 2002

Quality evaluation must be more developed in order to offer the sufficient information for producer, distribution centers buyer, consumer. There are many parameters which influence the rice quality and cooked rice. It is difficult to evaluate the quality of rice and cooked rice by only some parameters. In the case of rice quality evaluation in Korea, physicochemical inspection is performed by examining the minimum and maximum limits of brown rice recovery, moisture content, damaged kernel, and colored kernel as inspection standard. Marketing standard of rice defines the limits of perfect, white core and belly, colored, damaged kernels, and broken rice, classifying into special, excellent, and normal grades. As a research direction for the development of rice quality evaluation, establishment as parts of technical field, must be further developed as follows : more detailed measure of characters, search of unknown taste-related components, creation and grade classification of quality evaluation factors at each management stages of treatment after harvesting, evaluation as food material as well as cooking rice, method development for simple evaluation and establishment of equation for palatability. In the side of policy, the following concerns must be conducted: price discrimination in conformity to rice cultivar and grade under the basis of qualify evaluation method developed, fixation of head rice branding, and introduction of low temperature circulation.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.47-53
• /
• 2019

BACKGROUND: This experiment was conducted to examine the effects of organic Se concentration and the number of foliar applications on growth characteristics and Se content in rice. METHODS AND RESULTS: A series of multiple foliar applications were performed at (1) 3 times (maximum tillering stage + booting stage + heading stage), (2) 4 times I (effective tillering stage + maximum tillering stage + booting stage + heading stage), (3) 4 times II (maximum tillering stage + booting stage + heading stage + grain filling stage) according to the development stage. Each set of the foliar application plots was treated with 0, 10, 20, 40, 60, 100 ppm of Se and with mixed pesticide ($P^*$ + Se 40 ppm) in which the treatment time was the same as that of the treatment 4 times II. The total cultivation period of rice was 184 days. Se contents in rice (brown rice, white rice) were analyzed by ICP. CONCLUSION: The number of grains per head tended to decrease with increasing concentrations of organic Se in all treatments. However, number of panicles per hill did not show statically significant differences between the 3 times and 4 times I treatments. The grain yield decreased with the 3 times and 4 times II, but there was no significant difference in 4 times I. Se content in brown rice was the highest at 100 ppm Se (5268.64) treatment and lowest at 10 ppm Se ($1269.19{\mu}g{\cdot}kg^{-1}$) treatment. Se content in the polished rice was the highest at 100 ppm Se (5047.33) treatment and lowest at 10 ppm Se ($885.05{\mu}g{\cdot}kg^{-1}$) treatment. The higher selenium was treated, the higher Se content was found in the rice (brown rice, polished rice).