• Title/Summary/Keyword: Hazardous elements

Search Result 91, Processing Time 0.024 seconds

Human exposure of hazardous elements from different urban soils in Bangladesh

  • Islam, Md.S.;Ahmed, Md.K.;Al-Mamun, Md.H.
    • Advances in environmental research
    • /
    • v.5 no.2
    • /
    • pp.79-94
    • /
    • 2016
  • In order to evaluate the contamination and health risk, levels of six hazardous elements i.e., Cr, Ni, Cu, As, Cd and Pb in soils of 12 different land-uses were measured. The average concentration of Cu, Cr, Ni, Pb, As and Cd in soils were 267, 239, 206, 195, 58 and 16 mg/kg, respectively. Levels of each metal exceeded the environmental action level for soils, which could pose significant risk to human. The metal concentrations were subsequently used to establish hazard indices (for adults and children) where the 5th and 95th percentile values were used to derive the hazard index through different exposure pathways (ingestion, dermal contact and inhalation). Considering the total exposure through each of the three pathways, the hazard index elucidates that there was a potency of non-cancer risk at most of the sites for both the adults and children. The findings of this study suggested that different land-use soils were severely contaminated with hazardous elements and attention is needed on the potential health risks to the exposed inhabitants.

Short-term Effect of Phosphogypsum on Soil Chemical Properties

  • Chung, Jong-Bae;Kang, Sun-Chul;Park, Shin
    • Korean Journal of Environmental Agriculture
    • /
    • v.20 no.5
    • /
    • pp.317-324
    • /
    • 2001
  • Short-term effect of phosphogypsum on soil properties including acidification, salinity and metal availability were investigated under laboratory and field conditions. Phosphogypsum and mixtures of phosphogypsum and compost were added to soil and incubated in a laboratory condition with 15% moisture content. Phosphogypsum treatments were 2.5 and 5.0 g/kg soil and in the treatments of phosphogypsum and compost mixture 10 g of compost was added additionally. After the 30 days of incubation, an additional phosphogypsum and/or compost were added to the remaining soils at the same rates of the first treatments. pH, electrical conductivity, and available hazardous elements were measured periodically during the incubation. Field experiment was conducted in a plastic film house of mellon with four treatments of phosphogypsum and compost mixtures - 25+125, 50+125, 50+250 and 100+250 kg/165 $m^2$. pH, electrical conductivity, and hazardous elements in soil and total hazardous elements in leaf were measured. In the laboratory experiment, after 30 days of the first phosphogypsum application, soil pHs were lowered by 0.7-0.8 units. After the second treatment of phosphogypsum 0.2 units of additional acidification occurred. However, acidification was not observed in the soils treated with mixtures of phosphogypsum and compost. In the laboratory experiment, phosphogypsum treatments increased electrical conductivity very significantly. In field experiment, pH and electrical conductivity of soils treated with phosphogypsum were nearly the same as those of soil not treated with phosphogypsum. Since soil condition in the field study was an open system, the free acids and salts derived from phosphogypsum could be diffused down with water leaching through the soil profile and then any significant acidification or salt accumulation in the topsoil could not be observed. In both laboratory and field experiments, levels of available hazardous elements in soils treated with phosphogypsum were quite low and not different from the levels found in the control soil. Results obtained from this study suggest that application of phosphogypsum at appropriate rates on agricultural land appears of no concern in terms of acidity, salinity and hazardous element content of soil.

  • PDF

Concerns about Hazardous Elements on Foods and Recognition of the Roles of Government, Food Producers, and Consumers in Securing Food Safety (식품 위해 요인에 대한 우려도 및 식품 안전성 확보를 위한 정부, 식품 생산자, 소비자의 역할 수행에 대한 인식도)

  • Kim, Hyo-Chung;Kim, Mee-Ra
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.21 no.3
    • /
    • pp.401-417
    • /
    • 2011
  • The purpose of this study was to investigate consumer concerns about hazardous elements on foods and recognition of the roles of government, food producers, and consumers in securing food safety. The data were collected from the 443 adult consumers living in Seoul, Busan, Daegu, Incheon, Kwangju and Daejeon through a self-administered questionnaire. Frequencies, t tests, analysis of variance and Duncan's multiple range tests were conducted using SPSS Windows. The results of the survey were as follows: (1) the respondents were worried about health risks related to hazardous elements on foods, (2) many respondents were more worried about preservatives of imported foods than those of domestic foods, and (3) most respondents mentioned that observance of enforcement regulations by producers was the most important factor for ensuring food safety in the future. These results imply that regulations regarding the safety of imported foods should be increased.

Pollution Characteristics of Hazardous Elements for Roadside Dust in Gwangju City, Korea (광주광역시 도로변 분진에 대한 유해원소의 오염특성)

  • Lee, Jang-Jon;Park, Young-Seog;Kim, Jong-Kyun;Han, Min-Su
    • Economic and Environmental Geology
    • /
    • v.40 no.3 s.184
    • /
    • pp.263-275
    • /
    • 2007
  • The purpose of this study was to show the pollution characteristics of hazardous elements from roadside dust in the Gwangju city. We collected 47 samples from November to December in 2004 and separated four groups such as residential area, industrialized area, downtown area and heavy traffic area fer characteristics comparison on hazardous elements. Roadside dust mostly consisted of quartz, albite, microcline, muscovite in XRD analysis. Content of hazardous elements varied: As $3.4{\sim}11.9 ppm$, Cd $0.2{\sim}28.2 ppm$, Co $32{\sim}526 ppm$, Cr $25{\sim}526 ppm$, Cu $11{\sim}375 ppm$, Ni $14{\sim}247 ppm$, Pb $13{\sim}413 ppm$ and Zn $101{\sim}972 ppm$. Average contents of hazardous elements of Zn>Cu>Pb>Cr>Co>Ni>Cd. Content of hazardous elements was low in residential area, whereas that of heavy metal was much the same in both in heavy traffic area. Content of hazardous elements such as Cd, Co, Cr, Cu, Ni, Pb, Zn was found to be particularly high in industrialized area. According to these results it was possible to presume that industrialized area was affected by industry activity such as machinery, petrochemical, automobile and electronics industry. The SEM analysis, detected Pb, Cr, Ni, and Fe particles in samples of industrialized area contaminated by industry activity. The correlation coefficient table resulted from the samples of roadside dust showed that there was same direction increase of content between elements. In other words, when the content of Cd increase, Cr and Ni increase, as Cr increase, Cu and Ni increase, as Cu increase Ni increase and Pb increase Zn increase. Based on these results it was possible to predict and interpret similar contamination patterns in this study.

Hazardous Substance Analysis of Disposable Diaper for Infant (유아용 일회용 기저귀의 유해성 평가)

  • 신정화;윤혜온;박미애;안윤경
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.28 no.1
    • /
    • pp.165-171
    • /
    • 2004
  • The analytical method of toxic heavy metals in disposable diapers was developed. Disposable diapers obtained from Korea, Japan, America and German were determinated and quantified. Sample treatment (Total Digestion) was wet chemical acid digestion for extraction of nine hazardous inorganic elements (Sb, As, Pb, Cd, Cr, Co, Cu, Ni, Hg) in disposable diapers. Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) have been used for analyzing nine hazardous inorganic elements. The results were as follows : The concentration of extractable Sb which was treated for 3 hours with artificial urine and disposable diapers was higher than those of 6 hours and 24 hours. The concentration of extractable Cr was same as Sb. On the other hands, the behavior of Cu and Ni were different from Sb and Cr. Concentrations of extractable Cu and Ni increased as increasing the reaction time between artificial urine and disposable diapers.

A Study on the Hazard Elements and Reduction for the Armored Wheeled Vehicle River Crossing Operation (기능분석을 활용한 차륜형 전투차량의 수상운행 위해 요소 분석 및 경감 방안 연구)

  • Na, Jae Hyun;Lee, Cheol Woo;Lee, Seung Jong;Kim, Jong Hyun;Kim, Eui Whan
    • Journal of the Korean Society of Systems Engineering
    • /
    • v.10 no.2
    • /
    • pp.15-20
    • /
    • 2014
  • The river crossing is a very challenging operational function for the ground wheeled vehicle. In this study, the typical hazardous elements were identified by analysing the functional flow of river crossing operation and the survey on the similar operational experiences in real fields. The identified hazardous elements were reviewed on the basis of ALARP concept and reduction approaches were recommended for limited cases.

Dispersion Characteristics of Hazardous Elements for the Stream Sediments of Primary Channels in the Namhae-Hwngye area (남해-화개지역 1차 수계 하상퇴적토의 환경유해원소 분산특성)

  • Park, Yaung-Seog;Park, Dae-Woo;Kim, Jong-Kyun;Hong, In-Hee;Lim, Sung-Tae
    • Journal of Soil and Groundwater Environment
    • /
    • v.12 no.6
    • /
    • pp.107-117
    • /
    • 2007
  • Dispersion characteristics and envirounmental impactes of the stream sediments were investigated and geochemical disaster in the Namhae-Hwagye area was predicted. Stream sediments having no possibility of contamination effect and representing drainage basins were collected. Major and hazardous elements concentrations were determined by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES have been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1'st and after that $HClO_4$, HF and HCl with $200^{\circ}C$ heating at 2'nd stage. Hazardous elements concentrations for the stream sediments in the Namhae area were Cu $5.66{\sim}168\;ppm$, Pb $18.0{\sim}40.7\;ppm$, Cr $21.6{\sim}147\;ppm$, Co $4.86{\sim}25.3\;ppm$. Hazardous elements concentrations for the stream sediments in the Hwagye area were Cu $16.4{\sim}41.2\;ppm$, Pb $26.5{\sim}37.5\;ppm$ Cr $79.6{\sim}153\;ppm$, Co $15.7{\sim}29.5\;ppm$. Concentration of Cu and Co in the stream sediments show a negative correlation with $SiO_2$ in all study area. According to E.I.(Enrichment Index) of stream sediments was not enriched in study area. And average E.I. was 0.35 (Namhae) and 0.56 (Hwagye) respectively. The stream sediments were enriched as in order of Pb > Cr > Co > Cu. And the average of Enrichment Factor (E.F.) was 0.46 to 2.84, respectively. E.F. concentration of Cu and Co were nearly similar enrichment characteristic but E.F. concentration of Cr were higher enrichnent characteristic in Namhae than Hwagye area. Pb was highly enriched in all study area but the tolerable level that used to investigate the enrichment degree of hazardous elements, was not exposed to harmful hazardous elements.

An Evaluation of the Quantitative Risk of Plastic Process Manufacturing Industries by Means of the 4M Method

  • Lee, Dong-Ho;Kim, Jong-In
    • International Journal of Safety
    • /
    • v.6 no.2
    • /
    • pp.8-12
    • /
    • 2007
  • This study includes a case study among plastic process manufacturing companies, based on which, the currently used 4M method is applied in terms of machine, media, man, and management, to conduct quantitative risk evaluation, and thus to contribute to reducing human and material loss as well as preventing accidents in industrial fields. The result of this study is analyzed based on the 4M-risk assessment to find out the hazardous risk elements, and the quantitative evaluation made it predictable the value of risk(frequency $\times$ intensity) in such classified levels as serious risk, critical risk, and intolerable risk. Further, Among the businesses with hazardous risk elements and high frequency of industrial disaster, risk analysis was conducted for each process, and as a result, 38 cases among 76, including those of serious risk, critical risk, and intolerable risk, were improved, and the risk was reduced. Besides, it is thought that with the engineering approach with 4M-Risk Assessment, the attempt to improve safety level contributes to prevention of accidents.

Concentrations of SPM and Ambient Hazardous Heavy Metals in an Industrial Complex Area in Daegu City (대구시 산단지역 대기 중 SPM과 유해중금속성분의 농도)

  • Song, Hee-Bong;Kwon, Jong-Dae;Park, Su-Kyoung;Kim, Eun-Kyung;Yoon, Hyun-Suk;Ju, Myeong-Hui;Bae, Gi-Soo
    • Journal of Environmental Health Sciences
    • /
    • v.41 no.4
    • /
    • pp.259-267
    • /
    • 2015
  • Objectives: This study evaluated the regional and seasonal concentrations of ambient hazardous heavy metals in an industrial complex area in Daegu City. Methods: A total of 64 SPM (Suspended Particulate Matter) samples were collected in non-industrial and industrial areas during 2014 and were analyzed for hazardous heavy metals elements (As, Cd, Mn, Ni, Pb) with ICP after acid extraction. Results: SPM and hazardous heavy metals concentrations showed regional (industrial complex area>non-industrial complex area) and seasonal (spring, winter>fall, summer) variations. All of the hazardous heavy metals were influenced by anthropogenic sources. The pollution index of hazardous heavy metals was very low, showing roughly one-quarter of the level of the air quality guidelines of WHO. The correlation analysis among SPM and hazardous heavy metals indicated that components of non-industrial complex areas were more related to each other than those of industrial complex areas, and the correlation in the winter was higher than in other seasons. Conclusion: It is necessary to control air pollution sources and establish related policy because hazardous heavy metals from industrial areas can influence residential areas.