• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.3
• /
• pp.235-247
• /
• 1999

This study was performed to investigate what was the most serious occupational factors in small scale industries. Twenty-three occupatonally hazardous substances were measured at the five workplaces in the Eastern Seoul during 1995∼1996. Total of 2,020 samples were analyzed by either GC/FID for organic vapors or AAS for heavy metals. From the results of this study noise was the most serious factor at the selected workplaces. Noise level in the metal processing, the printing, and the auto repairing industries exceeded the 8 hr PEL by 19.7%, 13.6%, and 11.6%, respectively. Mean concentrations of toluene in the shoe making and the printing industries exceeded the assessment crieterion by 6.0% and 3.8%, respectively. Further study of risk assessment of occupational exposure may be required to protect workers from hazardous working conditons.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.165-171
• /
• 2004

The analytical method of toxic heavy metals in disposable diapers was developed. Disposable diapers obtained from Korea, Japan, America and German were determinated and quantified. Sample treatment (Total Digestion) was wet chemical acid digestion for extraction of nine hazardous inorganic elements (Sb, As, Pb, Cd, Cr, Co, Cu, Ni, Hg) in disposable diapers. Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) have been used for analyzing nine hazardous inorganic elements. The results were as follows : The concentration of extractable Sb which was treated for 3 hours with artificial urine and disposable diapers was higher than those of 6 hours and 24 hours. The concentration of extractable Cr was same as Sb. On the other hands, the behavior of Cu and Ni were different from Sb and Cr. Concentrations of extractable Cu and Ni increased as increasing the reaction time between artificial urine and disposable diapers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.56-57
• /
• 2018

This study is a fundamental consideration for using CGS from the IGCC as a fine aggregate for concrete. For the review, the physical properties and hazardous materials content of KS F 2527 were considered. The results showed that KS F 2527 standard was generally satisfied, making it possible to confirm the possibility that it is a fine metal considering its physical properties and hazardous materials content characteristics.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.141-159
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.37-41
• /
• 2005

Work related musculoskeletal disorders became a hot issue in Korea since many workers reported musculoskeletal disorder problems. Korean government enacted a law to require companies to take measures to prevent musculoskeletal disorders at work. This study found workers' WMSDs symptoms in squatting work posture which the rate of the occurrence was relatively high among work types to bring about WMSDs in railroad cars maintenance works and analyzed to compare the hazardous jobs in the industrial safety health law in South Korea with the caution jobs in Washington State in U.S. The hazardous jobs in South Korea were more effective in squatting work posture from this study result and this study data will be a great help to plan and carry out an effective prevention program about WMSDs.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.1
• /
• pp.9-19
• /
• 2008

Work-related musculoskeletal hazards in a paper-making industry were examined to explore ergonomic interventions in a participatory approach for mitigating the hazards. Manual tasks occurred in this paper-making industry were quite different with ordinary assembly industry where individual workers perform certain specified tasks repetitively. Workers used to perform varieties of team-based irregular manual tasks to interact with the facilities. Among 96 manual jobs investigated, 44 potential hazardous jobs were screened during basic investigation phase and finally 16 hazardous jobs were identified by the detailed analysis phase. The major hazardous factors were awkward postures and excessive weights. Possible ways of intervention were developed, reviewed and proposed by an ergonomics team comprised of staffs and engineers from various departments and ergonomics specialist from outside the company. The proposed intervention ideas were evaluated and modified by the workers and union representatives in terms of usability and comfort. Implemented interventions including mechanization, automation, and improvement of tools and equipments provided fairly promising results.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.175-181
• /
• 2001

In compliance with the Industrial Safely and Health Acts, the owners/users have performed self-inspection at regular intervals to secure safety in the use of hazardous machinery, equipment and facilities However, securing safety, which is the goal of self-inspection, has not been thoroughly understood in most small businesses and factories. The objective of this research is to analyze the importance and effects of self-inspection in preventing accidents in businesses and factories that use hazardous machinery and facilities. The result shows that self-inspection has made a good contribution to the prevention of accidents. Most businesses and factories that responded the survey answered they have improved safety in the use of machinery and facilities through self-inspection, though the ways of self-inspection were not all the same. However, the result also reveals that there are rooms for further improvement in the areas of self-inspection intervals, self-inspection methods and the selection of self-inspection objects. This improvement is necessary to improve the effect of self-inspection and to minimize regulations of the government on business activities.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2071-2073
• /
• 2000

Grounding electrode design is an important part in lightning protection, and the limit of hazardous voltages (step and touch voltages) below the permissible voltage for human body has been the main goal of grounding electrode design. In this paper, the grounding electrode for the reduction of hazardous voltages was designed and evaluated newly. It was known that the inclined auxiliary grounding conductors installed outside the grounding mesh grid are very effective to reduce the step and touch voltages.

• YAKHAK HOEJI
• /
• v.58 no.2
• /
• pp.125-128
• /
• 2014

We developed an alternative assay method without hazardous reagent of chloroform for urazamide tablets in Korean Pharmaceutical Codex. The HPLC analytical method was validated by system suitability, linearity, precision, accuracy and robustness. The linearity of the calibration curves in the desired concentration range is good ($r^2$ >0.999). Precision was obtained less than RSD 1.17%. Accuracy was obtained with recoveries in range of 98.12% and 99.47%. The developed assay could be expected to become valuable tools for revising the Korean Pharmaceutical Codex.