• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.185-198
• /
• 2017

The application of composites as an alternative material for marine steel hatch covers is the subject of this study. Two separate approaches are considered; weight reduction approach and strengthening approach. For both approaches Finite Element Analysis (FEA) was performed using ANSYS software. Critical design parameters of the composite hatch cover and FEA are discussed in details. Regarding the weight reduction approach; steel hatch covers of a bulk carrier were replaced by composite covers and a weight reduction of 44.32% was achieved leading to many benefits including fuel saving, Deadweight Increment and lower center of gravity of the vessel. For the strengthening approach; the foremost hatch cover was strengthened to withstand 150% of the load required by IACS for safer navigation while no change in weight was made between the steel and composite covers. Results show that both approaches are feasible and advantageous.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권8호
• /
• pp.1174-1179
• /
• 2009

An experiment was conducted to study the effect of post-hatch feed deprivation on yolk sac utilization andsubsequent performance of young broiler chickens (280) up to 35 days of age. The experimental treatments included access to feed at 8 h intervals after hatch, up to 48 h (0, 8, 16, 24, 32, 40 or 48 h). Water was offered ad libitum to all the groups immediately after placement. Results indicated that chicks with access to feed immediately after hatch used up the residual yolk more quickly. Access to feed between 8-24 h post-hatch, supported faster utilization of residual yolk compared to those chicks that remained unfed for 40-48 h (p<0.05). Further, deprivation of feed up to 24 h did not alter the lipid and protein contents in residual yolk, but fasting of chicks beyond 24 h (32, 40 and 48 h) led to retention of higher lipid and lower protein content in the yolk sac (p<0.05). At 7 days of age, the weights of proventiculus and gizzard were not affected by feed deprivation up to 48 h. However, the liver, pancreas and jejunum recorded significantly (p<0.05) heavier weights in chicks that were fed during the initial 24 h period compared to delayed feeding (32-48 h). Chicks fed within 24 h after hatch gained significantly (p<0.05) higher weight at 5 weeks of age than those that received feed between 32 and 48 h. Feed deprivation for 48 h was more detrimental to growth than 24-40 h. This study revealed the significance of early posthatch feeding (<24 h) on faster utilization of yolk sac nutrients and optimum development of intestines and organs, culminating in improved weight gain (>10.5%) of broilers at 5 weeks of age.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.331-339
• /
• 2006

The objective of this paper is to calculate the fatigue strength for upper deck hatch corner insert plate of large container carriers without wave load analysis and global finite element analysis at the initial design stage. Wave load analysis and global F.E. analysis for three container carriers have been performed by GL(Germanischer Lloyd) procedure to propose the equation for hatch corner stress range which is the important factor in fatigue strength calculation. Considering the restraining effect of bulkhead, three types of equation, that is, single tight bulkhead, double tight bulkhead and support bulkhead have been proposed. Using the proposed equations, a simplified fatigue analysis based on GL rules has been performed for two container carriers of which fatigue strength analysis was carried out by GL. From the comparison between fatigue strength result of using the proposed equations and that of GL, it has been found that proposed stress range equations are useful for scantling of upper deck hatch corner insert plates for over 8,000 TEU class container carriers.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.41-48
• /
• 2010

The purpose of this study is to establish the control method of the global bending distortion caused by fabrication process of hatch-cover in a container ship. In order to do it, the transitional behavior of global bending distortion in the deck of hatch-cover during fabrication process was measured by 3-dimensional measuring instrument. From the results, the principal factor controlling the global bending distortion was identified as the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the change of the centroid axis of hatch-cover in each fabrication process. Therefore, in this study, with the predictive equations of the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the simplified thermo elastic method, the predictive method for the global bending distortion was established and verified by comparing with the measured result. Based on the results, the amount of reverse bending distortion of main stiffeners was determined to prevent the global bending distortion of hatch-cover.

• 한국수산과학회지
• /
• 제52권4호
• /
• pp.389-399
• /
• 2019

This study is designed to observe the development of skeleton of Sakhalin sole Limanda sakhalinensis in order to use the findings as the basic data for the taxonomic research. As for the development of skeleton, on 20 days of the hatch when its average total length was 5.86 mm, the clavicle and the paraspenoid in the cranium were ossified. As for the jaw bone, the premaxillary and the dentary were ossified. On 28 days of hatch when its total length was 7.05 mm, 25 neural spines and 22 hemal spines were ossified and 5 fin rays appeared. On 34 days of hatch when its average total length was 8.40 mm, the end of tail was twisted by $45^{\circ}$ and 3 hypural bones were ossified. On 48 days of hatch when its average total length was 10.1 mm, 2 actinosts below the postcleithrum were ossified. On 54 days of hatch, when the average total length was 10.4 mm, the ethmoid, prootic and exoccipital were ossified, thus completing the ossification of skeleton.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.100-104
• /
• 1996

This paper describes the characteristics of micro-burr formation in the cross hatch and deburring in honed surfaces. Two types of micro-burrs formed in the cross hatch were defined as upper edge burr (type A) and side edge burr (type B). The size of micro-burrs were measured for the honed surfaces of several cross hatch angle. Deburring mechanism and system using magneto-electrolytic process including the abrasive pad for mechanic deburring effects together were introduced. Deburring experiments and analysis were carried out to confirm the effectiveness of the deburring process.

• 산업공학
• /
• 제19권4호
• /
• pp.270-280
• /
• 2006

The shipping plan for an efficient augmentation of terminal is NP-hard problem which is subordinate to a shipping quantity. The load location problem and stowage planning problem are two important tactical problems for the efficient operations of container terminals. This paper is concerned with reduction of feasible region in constraints for stowage planning. After designing model which minimizes the number of shifting and the travel distance of the transfer crane, the simulated annealing algorithm is employed to search optimal solution quickly and accurately. In order to apply more realistic approach, the partial restriction through adding hatch is complemented to stowage planning decision problem applied in cluster. A variety of numerical experiments demonstrated that solutions by simulated annealing algorithm are useful and applicable in practice.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.86-88
• /
• 2006

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.705-713
• /
• 2011

본 논문에서는 Network RTK 보정정보 생성 프로세스에서 핵심 process인 기준국간 미지정수 결정을 위해 Hatch filter를 이용한 방법과 L1/L2 측정치 조합을 활용하는 방법에 대해 소개하고 시뮬레이션 데이터 및 실측 데이터를 활용하여 그 성능을 비교 및 검증하였다. 각각의 방법에 대해 수식 전개를 수행하였으며, 사용자 성능 검증을 위해서 다중 기준국 네트워크에 대해 생성한 보정정보와 사용자 위치에서 생성한 보정정보의 차이값을 비교하였다. 각각의 기준국간 미지정수 결정 방법을 실측 데이터에 적용하여 사용자 성능을 예측한 결과, Hatch filter를 사용한 경우에는 단일 기준국 RTK 기반의 방법에 비해 다중 기준국 네트워크에서 생성된 보정정보를 사용하는 것이 사용자 성능을 크게 향상시키는 결과를 확인하였다. 그러나 사용자의 미지정수에 영향은 없으나, 상당한 크기의 바이어스 오차가 포함되는 것을 확인하였고 그 원인에 대해 분석하였다. L1/L2 측정치 조합을 이용한 경우, Hatch filter를 사용한 방법에 비해 사용자에 발생하는 오차의 크기가 훨씬 감소하였으며 잔차의 경향성도 훨씬 감소한 것을 확인하였다.