• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.407-417
• /
• 2015

Recently, piezo-aeroelastic energy harvesting has received greater attention. In the present study, a piezo-aeroelastic energy harvester using a nonlinear trailing-edge flap is proposed, and its nonlinear aeroelastic behaviors are investigated. The energy harvester is modeled using a piezo-aeroelastic model of a two-dimensional typical section airfoil with a trailing-edge flap (TEF). A piezo-aeroelastic analysis is carried out using RL and time-integration methods, and the results are verified with the experimental data. The linearizing method using a describing function is used for the frequency domain analysis of the nonlinear piezo-aeroelastic system. From the linear and nonlinear piezo-aeroelastic analysis, the limit cycle oscillation (LCO) characteristics of the proposed energy harvester with the nonlinear TEF are investigated in both the frequency and time domains. Finally, the authors discuss the air speed range for effective piezo-aeroelastic energy harvesting.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.10-13
• /
• 2015

This paper proposed a novel user's information feedback algorithm for improving network energy harvesting rate. The proposed algorithm is focused on determining energy harvesting users comparing increasing ratio of the amount of harvesting energy versus emitted energy and network threshold ${\alpha}$, which is critical harvesting parameter. Using this method, we can increase the rate of network energy harvesting preventing emitted energy from wasting inefficiently. The result of experiment in this paper shows that user's information feedback algorithm makes network energy harvesting rate more efficiently when it uses threshold ${\alpha}=15%$ to determine energy harvesting users.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.55-58
• /
• 2000

Germination of sweet and super sweet corn is lower than normal corn due to the higher sugar and lower starch contents of kernels. Sweet corn seeds are easily deteriorated in the field under the unfavorable condition, therefore it is important to identify the optimal harvesting time for seed production. This trial was conducted to investigate the responses of germination percentage of shrunken-2(sh2), brittle(bt), sugary(su), and sugary enhancer(se) hybrids in relation to harvesting dates. Eight hybrids of four different gene sweet corns were harvested at 15, 20, 25, 30, 35, 40, 45, and 50 days after silking(DAS). Germination test was performed using paper towel method. Mean germination percentages across eight hybrids showed the highest value at 45 DAS. There were significant differences among genes and within gene for germination. Shrunken-2 hybrid Mecca was higher than su hybrids for germination, indicating that sh2 would not be poorer than su Late harvesting beyond the optimal harvesting date might not be desirable because of more lodging and ear rots. Theoretical optimal harvesting date estimated from the regression equation was 40.9 DAS, however, practical date for harvesting would be a few days later than the estimated date if seedling vigor might be considered. Kernel dry weight per ear showed similar response to germination. Regression equation showed the highest kernel dry weight at 40.7 DAS. Significant correlations between kernel dry weight and germination were observed, impling that kernel dry matter accumulation would be an important factor for germination.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.224-228
• /
• 2006

The characteristics associated with the Alisma plantago quality and the factors as the proper harvesting time and drying temperature of Alisma plantago were examined from 2004 to 2006 at Sunchon, Southern region. The Alisma plantago cultivars tested were Sunwol and Yongjun. The highest yields of root and good quality, color and luster were obtained when harvested 22 days after first frost date and dried with $35-40^{\circ}C$ of a weeks at the drying oven for Sunwol and Yongjin cultivars. Considering from our results, optimum harvesting time were most likely to be harvesting time of 22 days after first frost date and drying temperature of $35-40^{\circ}C$ of a weeks at the drying oven.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.56-80
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type (Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvesting losses and milling quality. The study was also concerned about the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these result, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture . The results are summarized as follows ; 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system , 2.1 to 4.8 per cent for the harvesting system by use of binder, and 2.8 to 4.3 per cent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 percent. Milling recovery of the harvesting system by use of binder, 74.8 ∼75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74.3 ∼75.0per cent, and that of the harvesting system by use of combine, 73.8 ∼75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 per cent for the system by use of combine as the grain moisture was reduced from 28 to 16 per cent. 3. Milling recovery of Tong-il variety harvested by the traditional harvesting system was 72.3 ∼73.6 percent and it was lower when compared to that of 72.3∼75.0 per cent harvested by binder, and 73.0∼74.6 percent harvested by combine. 4. Head rice recovery of Tong-il variety harvested by the traditional harvesting system (58.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.28-35
• /
• 2013

Anthocyanin pigments from three pigmented rice varieties, Hongjinju, Sintoheugmi and Josaengheugchal pigmented by black color, were quantified to evaluate effects of transplanting and harvesting time during seed development. Hongjinju, a rice variety of grains pigmented by red color, contains only two kinds of anthocyanins, delphinidin and cyanidin. Meanwhile, delphinidin, cyanidin, and pelargonidin were identified in Sintoheugmi and Josaengheugchal. Anthocyanidin contents in pigmented rice variety Hongjinju under different planting times were decreased with prolonged harvesting times. The Sintoheukmi showed that cyanidin content was the highest among analyzed pigments during seed development. Two anthocyanins (cyanidin and pelargonidin) in Josaengheugchal recorded highest contents at 20 days after heading in three transplanting times. Cyanidin content was also slightly increased with prolonged transplanting time. Total anthocyanidin contents in Hongjinju were always lower than that of Sintoheukmi and Josaengheukchal. In two rice varieties, Sintoheugmi and Josaengheugchal, $a^*$ values were commonly slightly decreased by late transplanting and harvesting times. Changes of $a^*$ and $b^*$ values in waxy rice varieties, Sintoheugmi and Josaengheugchal varied more than those in Hongjinju. In Josaengheugchal, early harvesting before maturity showed lower brown rice yield and late harvesting in the each transplanting times resulted in highest brown rice yield.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.955-960
• /
• 2011

This study was aimed at investigating the applicability of energy harvesting technologies, which are regarded as new and renewable energy sources for real-time/wireless monitoring of intelligent railroad vehicles. The surrounding energy generated in a normal operating environment was monitored using a high-speed railroad vehicle in operation. This monitoring was performed in an attempt to evaluate the effectives of energy harvesting and the applicability of energy-harvesting-monitoring technologies under the conditions in which thermal energy and vibration energy are generated.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.36-44
• /
• 1983

Farm population was rapidly decreasing due to shift of the people from farm sector to the non-farm sector caused by the economic growth of the country. Especially, a great shortage of farm labor in busy farming period in June and October is becoming a serious problem in maintaining or promoting land productivity. The peak of labor requirement in summer is caused by rice transplanting and barley harvesting. In order to reduce the restrictions imposed on farm management by the concurrence of labor requirement and the lack of labor, the experimental study for mechanization of barley harvesting has been carried out in the fields. 1. The machines for barley harvesting were knap-sack type reapers, windrow reaper (power tiller attachment), binder and combine. The order of higher efficiency of machine for barley harvesting was combine, binder, windrow reaper (WR), knapsack type reaper 1(KSTR1), and knap sack type reaper 2(KSTR2; mist and duster attachment). 2. The ratio of grain loss for the manual, binder, and combine plot was about four percent of total field yield. 3. The total yield of barley in 35 days and 40 days harvesting after heading were 514 kg and 507kg per 10 ares respectively. The yield of 35 days-plot was higher than other experimental plots. 4. The lowest yield was recorded in 30 days-plot due to the large quantity of immatured grains and having lighter 1000-grain weight. The ratio of immatured grains was 2.66 percent and 1000-grain weight was 29.4 grams. 5. The total harvesting cost of the windrow reaper was 10,178 won per 10 ares. It was the lowest value compared to other machines. The next were combine, binder, KSTR1, KSTR2, and manual in sequence. As a result, the optimum time of barley harvesting for mechanization was 35-40 days after heading. Combine, binder, and windrow reaper were recommended as the suitable machines for barley harvesting in the work efficiency. However, in total harvesting cost, the windrow reaper was the most promising machine for barley harvesting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.125-130
• /
• 2008

This study analyzed the growth, seed quality, and yield of major early-maturing soybean cultivars by comparing them in order to utilize the research results in the selection of early-maturing soybean cultivars in multi-cropping farms in the Southern area. This field trial was conducted at Naju region (latitude $35^{\circ}04'N$, longitude $126^{\circ}54'E$), Jeonnam, with planting on June 15. The maturing date for Keunol-kong and Hwaseong-put-kong was found to be around September 12, which was earlier than other cultivars. Thus, there were advantages to introducing a cropping system as well as having good seed quality and high yield. On the other hand, the maturing date for Saeol-kong and Sinrok-kong was found to be around September 20, which was a little bit late; however, the seed quality of the cultivars was good and they had a high yield. Therefore, if we want to sow the following crops of soybeans around mid-September, Keunol-kong and Hwaseong-put-kong are advantageous, while for the seeding around late September, Saeol-kong and Sinrok-kong would be good. This study was also performed to identify the limitation time for early harvesting by reviewing seed quality and yield of major early-maturing soybean cultivars according to early harvesting. When harvesting Keunol-kong on September 6, which was six days earlier than the optimal harvesting time (September 12), there was no difference in seed weight, yield, or seed quality than those of the harvested at the optimum maturing time. As for Saeol-kong, when harvesting on September 18, which was six days earlier than the optimal harvesting time (September 24), there was no difference in seed weight, yield, or seed quality than those of the harvested at the optimum maturing time. Therefore, the stable limitation time for early harvesting of Keunol-kong and Saeol-kong was concluded to be six days earlier than the optimal harvesting time.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2016

Conventional RF energy harvesting systems can harvest energy and decode information from same source as an Hybirid-AP (H-AP). However, harvesting efficiency is seriously dependent on distance between users and H-AP. Therefore, in this paper, we proposed a transmission model for RF harvesting consisting of information and power source separately called Decoupled RF Energy harvesting networks. Main purpose of this paper is to maximize energy efficiency under various constraints of transmit power from H-AP and power beacon (PB), minimum quality of service and quality of harvested power of each users. To measure proposed model's performance, we proposed optimal time scheduling algorithms for energy efficiency (EE) maximization using Lagrangian dual decomposition theory that locally maximizes the EE by obtaining suboptimal values of three arguments : transmit power of H-AP, transmit power of PB, frame splitting factor. Experiment results show that the proposed energy-efficient algorithms converge within a few iterations with its optimality and greatly improve the EE compared to that of baseline schemes.