• 정보처리학회논문지A
• /
• 제14A권5호
• /
• pp.317-326
• /
• 2007

본 논문에서 GOSST(Grade of Services Steiner Minimum Tree) 문제에 대한 개선된 휴리스틱을 제안한다. GOSST 문제는 스타이너 포인트 문제의 한 변형으로 G-Condition을 만족하는 최소비용의 네트워크 구성을 찾는 문제이며, NP-Hard 혹은 NP-Complete 문제로 알려져 있다. 이 문제에 대한 이전의 연구에서 우리는 거리 우선 최소 신장 트리 생성방법과 직접 스타이너 포인트 배치 방법을 결합한 휴리스틱을 제안했었다. 본 논문에서는 스타이너 포인트 배치 방법으로 지그재그 스타이너 포인트 배치방법을 새롭게 제안한다. 이 방법과 거리우선 최소 신장 트리 생성 방법을 결합한 거리 지그재그 GOSST 휴리스틱은 컨트롤인 G-MST에 비해 31.5%의 네트워크 구축 비용의 절감을 얻었고 이전의 가장 좋은 GOSST 휴리스틱인 거리 직접 GOSST 휴리스틱에 비해 2.2%의 비용 개선을 보였다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.47-54
• /
• 2008

Hard turning process can be defined as a single-point machining process carried out on "hard" materials. The process is intended to replace or limit traditional grinding operations that are expensive, environmentally unfriendly, and inflexible. The purpose of this study is to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, tool wear shape and chip formation by the outer cutting of a kind of wear resistant tungsten carbide V30. Hard turning experiments were carried out on this alloy using the PCD (Poly Crystalline Diamond), cBN (cubic Boron Nitride) and PcBN (Polycrystalline cubic Boron Nitride) cutting tools. The PcBN and the usual cBN tools were used to be compare with the PCD tool and the dry turning was carried out. The PcBN is attractive as the tool material which replaces the PCD. The tool wear width and cutting force were measured, and the worn tool and chip were observed. The difference of the tool wear mechanism among the three tool materials was investigated.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.161-172
• /
• 1984

This study was undertaken to evaluate the cephalometric changes of the soft tissue and skeletal profile subsequent 10 the rapid palatal expansion in 25 Angle's Class III cases, ranging in age from six to fifteen years, with cross-bite of the anterior teeth, underdevelopment of maxilla and facial disharmony Following results were obtained: 1. ANS moved downward, Point A presented forward & downward movement increasing SNA and Point B presented backward & downward movement decreasing SNB. 2. Mandible was rotated to backward & forward and maxilla moved forward & downward with the bite opening and improvement of anterior teeth cross-bite. 3. Soft tissue on mandible was rotated to backward & forward following hard tissue changes causing the decrease of facial convexity angle and backward & downward rotation of Point B', Pog'. 4. Response of the upper lip was more significant in downward than forward direction, and correlated with the upper central incisor and mandible rotation. 5. Response of the lower lip was more significant in downward than backward direction, and correlated with the mandible rotation. 6. There was a rather high degree of correlation between skeletal profile and soft-tissue profile, 1 : LS, $\bar{1}$:Pog', Pog:LS, Pog:LI, Pog:Pog' in horizontal measurements and $\bar{1}$:Pog', Pog:LI, Pog:Pog' in vertical measurements.

• Structural Engineering and Mechanics
• /
• 제68권5호
• /
• pp.633-638
• /
• 2018

One of the important problems in the vehicle design is vehicle handling and stability. Effective parameters which should be considered in the vehicle handling and stability are roll angle, camber angle and scrub radius. In this paper, a planar vehicle model is considered that two right and left suspensions are double wishbone suspension system. For a better analysis of the suspension geometry, a kinestatic model of vehicle is considered which instantaneous kinematic and statics relations are analyzed simultaneously. In this model, suspension geometry is considered completely. In order to optimum design of double wishbones suspension system, a multi-objective genetic algorithm is applied. Three important parameters of suspension including roll angle, camber angle and scrub radius are taken into account as objective functions. Coordinates of suspension hard points are design variables of optimization which optimum values of them, corresponding to each optimum point, are obtained in the optimization process. Pareto solutions for three objective functions are derived. There are important optimum points in these Pareto solutions which each point represents an optimum status in the model. In other words, corresponding to any optimal point, a specific geometric position is determined for the suspension hard points. Each of the obtained points in the Pareto optimization can be selected for a special design purpose by designer to create an optimum condition in the vehicle handling and stability.

• 전기화학회지
• /
• 제6권3호
• /
• pp.187-195
• /
• 2003

The present article is concerned with the overview of carbonaceous materials used as anode materials for lithium ion secondary batteries. This article first classified carbonaceous materials into graphite, soft carbon and hard carbon according to their crystal structures, and then summarised the previous works on the characteristics of lithium intercalation/deintercalation into/from the carbonaceous materials. Finally this article reviewed our recent research works on the mechanism of lithium transport through graphite, soft carbon and hard carbon electrodes from the kinetic view point by the analysis of the theoretical and experimental potentiostatic current transients.

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.118-122
• /
• 1987

The medical image processing system is intended for a diverse set of users in the medical Imaging Parts. This system consists of a 640 Kbyte IBM-PC/AT with 30 Mbyte hard disk, special purpose image processor with video input devices and display monitor. Image may be recorded and processed in real time at sampling rate up to 10 MHz. This system provides a wide range of image enhancement processing facilities via a menu-driven software packages. These facilities include point by point processing, image averaging, convolution filter and subtraction.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.711-722
• /
• 2019

Considering stress singularities at point support locations, buckling solutions for plates with arbitrary number of point supports are hard to obtain. Thus, new Hp-Cloud shape functions with Kronecker delta property (HPCK) were developed in the present paper to examine elastic buckling of point-supported thin plates in various shapes. Having the Kronecker delta property, this specific Hp-Cloud shape functions were constructed through selecting particular quantities for influence radii of nodal points as well as proposing appropriate enrichment functions. Since the given quantities for influence radii of nodal points could bring about poor quality of interpolation for plates with sharp corners, the radii were increased and the method of Lagrange multiplier was used for the purpose of applying boundary conditions. To demonstrate the capability of the new Hp-Cloud shape functions in the domain of analyzing plates in different geometry shapes, various test cases were correspondingly investigated and the obtained findings were compared with those available in the related literature. Such results concerning these new Hp-Cloud shape functions revealed a significant consistency with those reported by other researchers.

• 한국지형학회지
• /
• 제20권3호
• /
• pp.41-53
• /
• 2013

이 연구는 안면도 둔두리 해식애를 대상으로 주기적인 현장조사를 통해 침식율을 산정하고, 침식형태를 분류하였다. 침식기준목을 이용한 현장 측정결과, 해식애의 연간 침식율은 지점별로 약 25~102cm/yr 정도로 추정되었다. 침식율은 봄에서 여름까지 점차 증가하다가 가을에 다소 감소하는 경향을 보였다. 특히, 6~7월 사이의 침식율이 다소 감소하는 추세를 보이다가 7~9월 사이에 급격히 증가하였다. 이러한 원인은 연구지역에 직접적인 영향을 끼친 여름 집중호우 및 태풍으로 발생한 폭풍해일에 의해 해식애의 침식이 다른 기간에 비해 급격하게 진행된 것으로 판단된다. 그 후 해식애의 침식율은 가을철이 되면서 점차 감소하다 12월에서 1월이 되면 다시 증가세를 보이는데, 이는 겨울철 해식애의 기반암이 동결 융해작용을 반복하면서 기계적풍화가 활발히 진행되었기 때문인 것으로 판단된다. 둔두리 해식애의 침식 형태별 유형은 세 가지 유형으로 구분이 된다. 첫 번째 Type A의 경우 동일한 기반암 혹은 경암층으로 이루어진 해식애에서 관찰되는 유형이다. 두 번째, Type B의 경우 동일한 기반암 혹은 경암층으로 이루어진 해식애 면에 토양을 포함한 풍화물질이 형성되어 있는 비교적 Type A에 비해 경사가 완만한 해식애에서 관찰되는 유형이다. 마지막으로, Type C의 경우 경암층과 연암층이 혼재되어있는 해식애에서 관찰되는 유형으로, 강우나 파랑에너지에 의해 연암층이 먼저 붕락 및 침식되고 노출된 경암층이 추가적으로 붕락이 이루어지는 유형이다.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.1.2-15
• /
• 1994

This is the study which appear the relation between the situation of Anchor point and the qualities of lithographic prints using the uncoated paper. Anchor point were measured by microscopic photography and Kubelka-munk`s method. The situation of Anchor point increased with print density and print though, but it decreased with evenness and rub off. In case of commercial uncoated paper, the situation of Anchor point was optimized when it was 25~35% apporoximately. In preparation of samples for microscopic photography, the samples were used by the resin testing methods. This method used that the resin fixes the printed papers of sample very hard, in preparation of samples for microscopica potography a good result could be gained by this method.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.