• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.397-400
• /
• 2008

Traditional propellants which have a hypergolic characteristic have a high performance but also have disadvantages of toxicity and complex handling requirement. In order to replace these propellants, one of the alternatives is hydrogen peroxide which generates high temperature oxygen and water vapor after catalytic reaction. In this paper, autoignition characteristics of kerosene by decomposed hydrogen peroxide were investigated to perform fundamental research for designing a thruster using hydrogen peroxide and kerosene propellants. Contraction ratio, whether flame holder exists or not, and feeding pressure of propellants were selected as variables. From the experiments for different mixture ratio, we confirmed the ignition stability is strongly affected by a feeding pressure of propellants.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.655-664
• /
• 2021

The purpose of this research paper is to overcome the impact the COVID-19 in Indonesia, the Government of the Republic of Indonesia has set Perpu No.1 of 2020 concerning State Financial Policies and Financial System Stability for Handling COVID-19 Pandemic. This paper uses a descriptive analysis method with a normative juridical approach, namely by explaining the politics of law in the stipulation of Perpu No. 1 of 2020 into Law, then analyzing its effect on the character of legal products contained in the Act. The data sources used in this paper are the 1945 Constitution of the Republic of Indonesia, Perpu Number 1 of 2020 which has been ratified into Law Number 2 of 2020, Legislation in the field of state finance, literature books, and several articles from print and electronic media. This paper concludes that the legal politics of establishing Perpu No.1 of 2020 into Act was born from a democratic political system and configuration, but the character of its legal products was conservative. The aim of the paper is to focus on the discussions related to the new regulations that have been made by the Indonesian government and analyse the impact resulting from the enactment of these regulations.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.130-143
• /
• 2012

Cablebolts used to be employed as auxiliary supports where long or high capacity bolts are needed, but become competitive by the improvements in supportability and easiness in handling. Based on the test results obtained from various researches, the performance of the cablebolts was analyzed numerically while varying lengths and fixing conditions. The supporting effecte is assessed by monitoring displacements and stress taken place in shotcrete. When cablebolts are grouted without being tensioned, supporting effect was not as good as that of rockbolts. But, their supportability was good enough to substitute rockbolts if tensioned properly. Post grouting right after tensioning of the cablebolts shows reduction in supportability, but long term stability could be achieved without losing supportability if grouted when the bolt is far enough from the face. Further study is necessary including laboratory and in-situ tests under various conditions to use cablebolts as main support in tunnels.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.177-183
• /
• 1996

With the increasing esthetic requirement in orthognathic surgeries, midfacial corrective surgeries were developed to improve the paranasal depression. Augmentation with autogenous bones has long been the standard in facial reconstruction, however limited graft availability, donor site morbidity, and difficulties in 3-dimensional shaping were led to limited use. Porous high density polyethylene$(Medpor{(R)})$ was introduced in the 1970s as an alloplastic implants. It can be used in various size and shapes, and shortend operation time. The purpose of this study is to determine, by means of cephalometrics, the degree of long term stability and gaining of the overlying soft tissue thickness. The results were as followings : 1. There was no evidence of foreign body reaction, infection, and tissue necrosis. 2. $(Medpor{(R)})$ implants had an advantage of clinical use ; easy to contour and adapt to obtain a precise 3-dimensional construction. 3. Cephalometric study of 16 cases of paranasal augmentation revealed an overall increase of soft tissue thickness of approximately 82.1% in 6-months following. 4. The successful results could be obtained under the aseptic handling.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.45-55
• /
• 2001

Transcritical flow is a term intended to denote the existence of both supercritical and subcritical flows within a computational domain. The major problems that need to be addressed while modeling transcritical flows include handling the differing features of signal propagation in subcritical and supercritical flow regions and maintaining conservation. The present study proposes the implicit ENO method as a high-resolution scheme for transcritical flow. This implicit ENO scheme is based on the ENO method, a new class of uniformly high-order-accurate essentially non-oscillatory implicit scheme, which has the advantage of unconditional stability. The implicit ENO scheme has not been used for the transcritical flow in open channel until now. As a result of application to the hypothetical dam-break flow, the implicit ENO scheme was ploved to produce accurate results with good robustness even though in the case of verb strong shock wave.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.107-114
• /
• 2014

This paper proposes a common rail pressure control algorithm for passenger car diesel engines. For handling the parameter-varying characteristics of common rail systems, the quantitative feedback theory (QFT) is applied to the design of a robust rail pressure control algorithm. The driving current of the pressure control valve and the common rail pressure are used as the input/output variables for the common rail system model. The model parameter uncertainty ranges are identified through experiments. Rail pressure controller requirements in terms of tracking performance, robust stability, and disturbance rejection are defined on a Nichols chart, and these requirements are fulfilled by designing a compensator and a prefilter in the QFT framework. The proposed common rail pressure control algorithm is validated through engine experiments. The experimental results show that the proposed rail pressure controller has a good degree of consistency under various operating conditions, and it successfully satisfies the requirements for reference tracking and disturbance rejection.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.688-694
• /
• 2006

Purpose: Reconstruction of the craniofacial defects can be carried out with autogenous tissues, allogenic implants, or alloplastic materials. Titanium mesh systems have been used for bony reconstruction in non load-bearing areas. They offer several advantages: immediate availibility without any donor site morbidity, easy handling, stable 3-D reconstruction, and low susceptibility to infection. The aim of this study is to evaluate the usefulness and complications of titanium mesh system in the reconstruction of the craniofacial defects. Methods: From Jan. 2000, to Dec. 2004, we performed reconstruction of craniofacial bone defects in 21 patients who had benign or malignant tumor and fracture events in the cranium, orbit, nasal bone, maxilla, zygoma and the mandible. The size of the defects ranged from $1.0{\times}1.5cm$ to $12{\times}10cm$. Two different mesh systems, micro-titanium augmentation mesh and dynamic mesh was used for bony reconstruction in non load-bearing areas. The patients were evaluated from 1 to 4 yrs clinically and radiographically with a mean follow up period of 1.5 yrs. Results: There were no serious complications, including wound infection, foreign body reaction, exposures or loos of the mesh, central infection and pathologic findings of bone around mesh exception of one patient, who had expired of skull base tumor recurrence. Long-term stability of the reconstructions and the overall functional and aesthetic outcome was excellent. Conclusion: Our experiences demonstrate that the Titanium mesh system is a relatively safe and efficient method in the craniofacial reconstruction and have broadens our choices of therapeutic procedures in the craniomaxillofacial surgery.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.1
• /
• pp.57-71
• /
• 2004

The objective of this study was to provide a better understanding of SUPAC-IR and its application in handling postapproval changes to immediate release solid oral dosage forms. Originally, SUPAC-IR was aimed at reducing the regulator burdern of the industry when they were making postapproval changes, but still at maintaining the formulation quality and performance of a drug product. The postapproval changes that were covered under SUPAC-IR included variations in the components ad composition of formulation, the site of manufacturing, batch size, manufacturing equipment, and manufacturing process. The guidance defined levels of changes, based on the likelihood of risk ocurrence and potential impact of postapproval changes upon the safety and efficacy of a drug product I suggested what a type of fing report should be submitted to the FDA for each level of change. Chemist, manufacturing, and control tests to be executed were also recommended for each change level The important tests specified in the guidance included batch release, stability, in vitro dissolution, and in vivo bioequivalence tests. However, there have been strong demands on revising the current SUPAC-IR in order to resolve some issues and to improve its usefulness in evaluating postapproval changes to immediate release solid oral dosage forms. In particular, the rigorous requirement of case C dissolution test and the definition of batch size were challenged by both academia and the industry. A revision work was in progress to reflect these inputs and to expand the utility of SUPAC-IR. As a result of these concerted efforts, an updated 2nd version of SPAC-IR would be likely to be issued ver soon to the public.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.632-632
• /
• 2009

The purpose of this study is to present the range of defects mentioned in the Product Liability (PL) and to establish an objective basis and grounds for the analysis of accidents expected to happen by analyzing and presenting the external flame pattern and electrical characteristics of an LED streetlight lamp, a new lighting lamp. From the analysis of the cross-section of a cable carbonized by an external flame, it was observed that the wire's strand and insulation material had solidly adhered, and that greater voids were formed at the surface than at the center. Irregular carbide lumps were formed in the globe directly exposed to the flame, and the globe carbonized by the indirect flame showed characteristics that they had melted and flowed downward. It was found that the forward and backward resistances of the normal LED were approximately 1.74 [$M{\Omega}$] and 140 [$M{\Omega}$], respectively. The lamp burnt by the strong flame exhibited infinite forward and backward resistances and the LED did not emit light. The carbonized LED lamp was gray and exhibited fine delaminations. According to the Product Liability, a product defect signifies a simple product defect. Most of the defects were caused by the lack of stability, and the defect of the product itself occurred during the design and manufacture. The defects in warnings and markings include an insufficiency of handling manuals and warnings, expressive warranty violations, defective markings, etc. In order to prevent an accident resulting from a product, it is necessary to prepare safety warnings and documentation, establish clear-cut lines of liabilities, and subscribe insurances. However, it could be seen that important factors against the Product Liability were product improvement, response to compensation requests and law suits, credit restoration, etc.