• Journal of Korean Port Research
• /
• v.3 no.1
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.131-142
• /
• 2000

Facility layout is the early stage of system design that requires a mid-term or long-term plan. Since improper facility layout might incur substantial logistics cost including material handling and re-installment costs, due consideration must be given to decisions on facility layout. Facility layout is concerned with low to arrange equipment necessary for production in a given space. Its objective is to minimize the sum of all the products of each equipment's amount of flow multiplied by distance. Facility layout also is related to the issue of NP-complete, i.e., calculated amounts exponentially increase with the increase of the number of equipment. This study discusses Hybrid GA developed, as an algorithm for facility layout, to solve the above-mentioned problems. The algorithm, which is designed to efficiently place equipment, automatically produces a horizontal passageway by the block, if a designer provides the width and length of the space to be handled. In addition, this study demonstrates the validity of the Algorithm by comparing with existing algorithms that have been developed. We present a Hybrid GA approach to the facility layout problem that improves on existing work in terms of solution quality and method. Experimental results show that the proposed algorithm is able to produce better solution quality and more practical layouts than the ones obtained by applying existing algorithms.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.591-596
• /
• 1997

천연 및 저농축 우라늄 가공시설은 취급하는 핵 물질의 민감도가 고농축 우라늄이나 플루토늄에 비하여 상대적으로 낮기 때문에 원자력발전소, 연구용 원자로 등과 같은 시설보다 국제원자력기구의 보장조치 적용 방법이 단순하다고 생각하기 쉽다. 그러나 가공시설은 취급되는 핵 물질이 UF6, 우라늄 분말, 소결체 등과 같이 계량하기 쉽지 않는 형태로 존재하는 중량시설(bulk handling facility)이기 때문에 오히려 핵연료집합체 만이 존재하는 계수시설( item facility) 보다 더 다양하고 정밀한 계량방법이 적용되고 있다. 이 때문에 국제원자력기구에서는 일반 원자력발전소의 4-5배에 달하는 사찰량을 가공시설에 투입하고 있으며, 동 시설에 대한 보다 효과적이고 효율적인 사찰방법을 개발하고 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.547-550
• /
• 2011

The purpose of this paper is to verify and validate the maintenance tasks of the construction of a nuclear facility using a digital mock-up and simulation technology instead of a physical mock-up. Prior to the construction of a nuclear facility, a remote simulator that provides the opportunity to produce a complete digital mock-up of the PRIDE (Pyroprocess Integrated Inactive DEmonstration Facility) region and its remote handling equipment, including operations and maintenance procedures has been developed. In this paper, the system architecture and graphic user interface of a remote simulator that coincides with the extraordinary nature of a nuclear fuel cycle facility is introduced. In order to analyze the remote accessibility of a remote manipulator, virtual prototyping that was performed it by using haptic device of external input devices under a 3D full-scale digital mock-up is explained.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.45-53
• /
• 1995

The Purpose of this paper is to describe and demonstrate a quantitative procedure for evaluating alternative material handling systems that are being considered for possible purchase. The procedure considers both quantitative factors(i.e. costs) and qualitative factors(i.e. equipment productivity) that should be considered in the evaluation process. Since these factors are not always quantifiable it is necessary that the procedure be able to quantify all factors in commensurable units. This is accomplished via a modification of the Brown and Gibson model for facility site location and selection. The model was demonstrated via a case example that encompassed the derivation of performance measures for three material handling systems.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.29-34
• /
• 2019

Safety of hydrogen handling facilities is needed as supply of hydrogen cars has been expanded recently. In this study, the adequacy of safety regulations of hydrogen handling facilities and the risk of damage with hydrogen leakage were studied. The range of explosion hazard location of the hydrogen filling plant was investigated using the computational fluid dynamics (CFD) method, Explosive hazardous area is influenced by leakage type, hole size and sectional area. When the conditions of KS standard are applied, range explosive hazardous area is expanded 7.05 m, maximum. It is about 7 times larger than exceptional standard of hydrogen station. Meanwhile, distance from leakage point to 25% LEL of hydrogen is investigated 1.6 m. Considering the shape of charging hose, regulation of hydrogen station is appropriate.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.293-301
• /
• 2024

Purpose: Ministry of Environment statistics reveals more than 132 fire·explosion accidents in South Korea between 2014 and 2023. Among them, fire and/or explosion accidents are very impactive in their scale and consequence. This study aims to suggest a new method of reasonable way to calculate the ventilation rate of indoor facility handling hazardous chemicals based on their inflammability. Method: A new method to calculate the ventilation rate is based on the physicochemical properties of the chemicals handled, which is more reasonable compared with the current regulation based only on the floor area of the facility. Result: Considering the physicochemical properties, 178 chemicals based on their inflammability were studied and 168(94%) met the criteria for the current regulation. Some materials have been shown to require too much or too little ventilation rate. Conclusion: Through this study, a reasonable method of calculating the required ventilation rate was proposed. This should be applied to ensure the safety of workers to deal chemicals.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.371.2-371
• /
• 2002

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1715-1718
• /
• 2005

During demonstrations of a process conditioning spent nuclear fuels, it may be necessary to transport and handle Spent fuel road cuts from Post Irradiation Examination facility to Slitting device in The hot cell. It may be not easy to transport spent fuel rod cuts because rod cuts are high radioactive materials. For this purpose, we have developed a capsule for transporting and handling high radioactive materials. We have analyzed conditions of a hot cell and requirements of the device, designed and manufactured The prototype of the device, and done some performance tests. From the tests, it has been shown that transportation and handling without scattering nuclear material was smooth but the weight of capsule was heavy. These result will be reflected to a design of the improved transportation and handling device which will be used during demonstrations.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.737-741
• /
• 2024

Laboratories in public institutions are facilities that handle chemicals and are small but handle various types, so safety management is performed as a small-scale handling facility. Hazardous properties of chemicals can occur regardless of the handling scale, and even small-scale handling facilities handle high-risk substances such as strong acid, so there is a possibility of chemical accidents. Therefore, the level of consciousness was analyzed by investigating safety consciousness through a survey of laboratory workers in public institutions handling chemicals. The analysis results presented safety-related regulations and work procedures, safety and health organizations, safety and health education, and laboratory safety and health management, which are investigation items, respectively, and are intended to be used as basic data for future safety and health policies and plans.