• 제목/요약/키워드: Handler

검색결과 131건 처리시간 0.02초

1999년 봉화군 일개 중.고등학교에서 발생한 세균성이질에 관한 역학조사 (Epidemiologic Investigation of an Outbreak of Shigella sonnei among Students in Bonghwa, 1999)

  • 배근량;임현술
    • Journal of Preventive Medicine and Public Health
    • /
    • 제33권1호
    • /
    • pp.10-16
    • /
    • 2000
  • Objectives : This study was carried out to investigate the sources of infection and modes of transmission of an outbreak of shigellosis that occurred among students of B middle and high school in Bonghwa, Korea from May 1 to 21, 1999. Methods : We conducted questionnaires to 468 students, 38 stalls and 9 food handlers twice times (May 6, May 21) for follow up and secondary attack rate. Personal details and history of illness and exposure to particular foods were sought. And we conducted rectal swab for culture to 243 students, 33 staffs and 9 food handlers. Bacteriological examinations of water in the school were done. Cases were identified as subjects who had diarrhea (two or more loose stools in a 24-hour periods) on or after May 1. Results : A total of 307 cases (attack rate: 59.6%) of 515 subject were identified, including 50 confirmed (46 students and 4 staffs) by S. sonnei. All 9 food handlers denied illness and were had rectal swab for culture at May 6 that were negative for S. sonnei. 146 of 307 reported fever, 156 had tenesmus, 44 reported vomiting, and only 5 of 307 reported blood in the stool. The median duration of diarrhea was 4 days (range: 1-18 days). The mean incubation period until onset of diarrhea was 63 hours (range: 46-144 hours) and the secondary attack rate was 2.8% (43 cases of 1,561 family members). Risk for illness was higher among students who had eaten watered kimchi at March 30 than among those who did not [301(72.7%) of 417 versus 5(9.6%) of 52; RR=7.51;95% CI=3.26-17.31]. Conclusion : The source of infection was estimated to be contaminated watered kimchi by ore or two food hardier who is presumed to be carrier.

  • PDF

능동 데이터베이스 기반 교육 정보 질의 처리 시스템의 설계 및 구현 (Design and Implementation of Active Database Based Query Processing System for Educational Information)

  • 이태정;이수정;이재호
    • 정보교육학회논문지
    • /
    • 제4권1호
    • /
    • pp.109-119
    • /
    • 2000
  • 본 논문에서는 WWW환경에서 능동 데이터베이스 기법을 활용한 교육 정보 시스템을 설계하고 구현하였다. 본 논문에서 개발한 시스템은 크게 사용자 그룹 인터페이스, 능동기반 모니터, 전문가 그룹 인터페이스로 구성된다. 개발 시스템을 구성하는 각각의 모듈들의 역할을 간략히 정리하면 다음과 같다. 사용자 그룹 인터페이스는 개발 시스템에 등록된 사용자들이 시스템에 접근하는 용도로 사용한다. 능동 기반 모니터는 트리거링 모듈로서 키워드 파서, 예외 상황 처리기, DB접근 모듈 등으로 구성되며, 키워드 인덱스 Q&A DB, 사용자 그룹 메일링 리스트, 전문가 그룹 메일링 리스트를 관리한다. 즉, 능동 기반 모니터는 본 논문에서 개발한 시스템의 핵심 부분으로 사용자의 요구를 키워드 기반으로 분석하여 요구 내용을 능동적으로 처리한다. 전문가 그룹 인터페이스는 개발 시스템에 등록된 전문가들이 질문 내용에 대한 답변을 제공하는 용도로서 사용한다.

  • PDF

방사성 폐기물 처분연구의 QA절차에 따른 웹기반 문서처리 워크플로우 시스템 개발 (Web-based QA Workflow System for Radioactive Waste Disposal)

  • 김태운;고창성;서대희;이광욱;강철형;황용수;이연명
    • 한국정보시스템학회지:정보시스템연구
    • /
    • 제12권1호
    • /
    • pp.159-175
    • /
    • 2003
  • During the early stage of radioactive disposal programs, important issues related with quality assurance of data sets, methodologies, R&D procedures are recognized as important ones. This paper focused on the development of web-based workflow standards for the QA procedures of the radioactive waste disposal programs. The flow of process was analyzed based on workflow concepts proposed by the Workflow Management Coalition (WfMC). QA system is based on the principles of T2R3. T2R3 Workflow was used to standardize and restructure the business and/or work process in the industry or organization. The WfMC has identified five functional interfaces to a workflow service as part of its standardization program. They are composed of process definition interface, worklist handler, application program interface, interface between workflows, and system management. The task flow and QA program were defined based on the workflow ideas. QA procedures for the R&D results of radiation disoposal were analyzed following the reference model of workflow. In addition, six program run list were created and implemented. The creation, revision, and approval of the test data were designed to be inplemented on the web environment. Through this system, R&D procedures such as planning, research, documentation, internal review and future independent peer review processes could be well organized and stored more systematically on the database and knowledge base. This will encourage the usage and data sharing between interested parties through it's clear and transparent workflow standards.

  • PDF

선형에 따른 전심의 이동에 관한 연구 (A Study on Shifting of Pivoting Point in accordance with Configuration of Ships)

  • 최명식
    • 한국항해학회지
    • /
    • 제10권2호
    • /
    • pp.83-96
    • /
    • 1986
  • In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

  • PDF

뇌 정위 방사선수술의 선량 계산을 위한 몬테카를로 시뮬레이션 코드 개발 (Development of Monte Carlo Simulation Code for the Dose Calculation of the Stereotactic Radiosurgery)

  • 강정구;이동준
    • 한국의학물리학회지:의학물리
    • /
    • 제23권4호
    • /
    • pp.303-308
    • /
    • 2012
  • 뇌정위 방사선수술의 선량계산을 위해 Geant4 기반의 응용 프로그램을 개발 하였다. 선형가속기에서 발생하는 방사선의 스펙트럼을 입력하기 위하여 사전에 실행하여 구한 스펙트럼에 각 에너지별로 구한 가중치를 곱하여 확률밀도를 구하였다. 이를 누적밀도로 변환하여 입력하도록 하였다. 메신저 클래스를 이용하여 다양한 형태의 MLC 조사면을 설정할 수 있도록 하였다. 갠트리와 테이블의 회전을 모사하기 위하여 rotateX와 rotateY라는 회전행렬을 사용하였다. 월드좌표 속에서 갠트리와 테이블을 정의하여 각각 회전을 구현하였다. 실제 환자의 자료는 CT의 dicom 파일에서 픽셀 크기, 매트릭스 크기 등의 정보와 픽셀의 HU를 밀도로 변환한 파일을 생성한 다음 이 파일을 이용 환자의 모델링에 이용 하였다. 환자의 모델링은 팬텀월드 안에 픽셀의 크기에 해당하는 복셀을 정의하고 이 복셀에 픽셀의 밀도와 이 밀도에 해당하는 물질을 할당해주었다.

웹 서비스 기반의 유비쿼터스 워크플로우 언어 (A Ubiquitous Workflow Language based on Web Services)

  • 한주현;조용윤;최재영
    • 정보처리학회논문지A
    • /
    • 제12A권6호
    • /
    • pp.485-492
    • /
    • 2005
  • 현재 비즈니스 및 분산 컴퓨팅 환경에서 사용되는 워크플로우는 서비스 통합 및 자동화, 동적 흐름 관리, 동시 수행, 실시간 서비스 등의 기능을 제공한다. 유비쿼터스 컴퓨팅 환경에서 서비스들은 사용자와 현재 사용자가 속해 있는 환경으로부터 다양한 정보를 제공받아 상황에 맞는 서비스를 동적으로 제공해야 한다. 이와 같은 서비스를 효과적으로 제공하기 위해서는 서비스의 자동화에 사용되고 있는 워크플로우를 유비쿼터스 컴퓨팅에 적용하고, 상황인지 서비스를 제공하기 위해 상황 정보를 워크플로우의 전이조건으로 명시해야 한다. 본 논문에서는 유비궈터스 환경에서 발생하는 상황 정보를 워크플로우의 서비스 전이조건으로 사용하기 위한 웹 서비스 기반의 워크플로우 언어인 uWDL (Ubiquitous Workflow Description Language)을 제안한다. uWDL은 상황 정보인 컨텍스트, 프로파일 및 이벤트 정보에 따라 사용자 상황에 맞는 서비스를 선택할 수 있다. 또한 uWDL 전용 파서와 컨텍스트 처리기를 통해 uWDL로 기술된 시나리오 문서가 제대로 실행되는지를 검증하였다. 유비쿼터스 환경을 위한 시나리오 설계를 위해 개발자는 uWDL 시나리오 편집기를 이용하여 유쿼비터스 환경의 상황 정보를 고려해 그에 맞는 서비스들의 관계를 워크플로우 형태로 기술함으로써 작업을 통합하고 자동화할 수 있다

서울 소재 개방형 주방 조리종사자들의 식품위생 지식수준과 수행도에 관한 연구 (Study on Food Sanitation Knowledge Levels and Practices of Open-kitchen Food Handlers in Seoul)

  • 박수진;김경희
    • 한국식생활문화학회지
    • /
    • 제31권6호
    • /
    • pp.573-586
    • /
    • 2016
  • The present study was conducted on 200 food handlers employed at restaurants with open-kitchens in Seoul to evaluate their food sanitation knowledge levels and practices. A majority of participants (88%) replied that open-kitchens are more hygienic than common kitchens due to the sanitary cooking process. The correct answer rate was 94.3% for sanitation of instruments and utensils and environmental sanitation, whereas food handling sanitation (66.8%) was ranked at the bottom among food sanitation knowledge. Total scores of food sanitation knowledge were significantly influenced by education level and ages of food handlers (p<0.001). Personal hygiene knowledge level of food handlers regarding institutional food service was higher than that of food handlers at restaurants and bakeries (p<0.001). Food sanitation practices scores showed significant differences in personal hygiene (p<0.001) and environmental sanitation (p<0.05) according to certificate possession. As the result of correlation analysis between food sanitation knowledge and practices, there was no significantly positive correlation, whereas a significant positive correlation was observed between knowledge of food handling and personal hygiene practices (p<0.05). The results show need for improvement in both knowledge and practice levels of open-kitchen food handlers. Consistent and customized food sanitation education program should be developed to protect against food poisoning at open-kitchen restaurants.

무선 텔레포니 에플리케이션 서버의 구현 (Implementation Of Wireless Telephony Application Server)

  • 최철웅;장지산;이정은;김민수;신동규;신동일
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2001년도 춘계학술발표논문집 (상)
    • /
    • pp.561-564
    • /
    • 2001
  • 본 논문은 무선 에플리케이션 프로토콜 Specification에서 제시하고 있는 WTA(Wireless Telephony Application) 를 기초로 네트워크에서 발생한 실시간 Event를 처리할 수 있는 모바일 클라이언트 및 WTA서버에 대한 설계와 구현에 대해서 기술한다. 또한 네트워크 이벤트 및 사용자가 발생시킨 이벤트를 디바이스에 독립적으로 처리할 수 있는 WTA 라이브러리와 필요한 컨텐츠를 실시간으로 브라우징하기 위한 Repository 에 대해 기술한다. 전체적인 WTA 환경 구조는 크게 2개의 물리적 구조인 Mobile Client와 WTA Server로 구현되어있다. Mobile Client의 내부 모듈은 표준 WAE 사용자 에이전트(Standard WAE User Agent)의 확장인 WTA 사용자 에이전트 모듈(WTA User-Agent Module), 필요한 resource를 서버로 요청하고 저장하는 채널 인스톨 모듈(Channel Install Module), network로부터 발생한 Event를 처리하는 이벤트 핸들러 모듈(Event Handler Module), mobile network 기능들(e.g. setting up calls)과 device specific feature(e.g. manipulating the phonebook)를 다루는 WTA 스크립트 라이브러리(WTA Script Library), Phonebook 엑세스 모듈(Phonebook Access Module), 실시간으로 즉각 이벤트에 반응하기 위한 Repository로 구성되어있고, WTA Server는 Client가 요청한 Content(services)를 전달 해 주는 컨텐트 전달 모듈(Content Deliver Module)과 서버 Phonebook 엑세스 모들(Server Phonebook Access Module)로 구성되어 있다.

  • PDF

모바일 게임 콘텐츠의 터치스크린 인터페이스 자동 생성 기법 (Automatic Generation Technique of Touch-Screen Interface for Mobile Game Contents)

  • 고석훈;손윤식;박지우;오세만
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제15권11호
    • /
    • pp.866-870
    • /
    • 2009
  • 최근 터치스크린을 탑재한 휴대폰의 출시가 늘어나면서 기존의 모바일 게임 콘텐츠를 터치스크린 콘텐츠로 변환하여 재사용하고자 하는 요구가 증가하고 있다. 하지만, 기존에 개발된 콘텐츠는 터치스크린 인터페이스를 갖고 있지 않기 때문에 터치스크린 콘텐츠로 자동 변환하는 것은 매우 어려운 문제이다. 본 논문에서는 터치스크린 인터페이스가 없는 모바일 게임 콘텐츠에 대하여 키보드 인터페이스 정보를 이용하여 자동으로 터치스크린 인터페이스를 생성하는 방법을 제안한다. 이 방법은 콘텐츠에서 사용되는 키 이벤트의 종류를 분석하여 최적의 스크린 키보드 레이아웃을 구성하고, 터치스크린 이벤트에 대해 자동으로 대응되는 키 이벤트를 발생시켜 키보드 이벤트 핸들러가 실행되는 터치 스크린 인터페이스를 생성한다. 끝으로, 실험을 통해 콘텐츠에 최적화된 터치스크린 인터페이스가 생성됨을 확인한다.

적하작업을 위한 공 컨테이너 기대 재취급 횟수 추정 (Estimating the Expected Number of Re-handles for Empty Containers during Loading Operation)

  • 이훈;김갑환
    • 한국항해항만학회지
    • /
    • 제43권3호
    • /
    • pp.197-208
    • /
    • 2019
  • 공 컨테이너 장치장의 사양, 취급 장비, 운영방법이 공 컨테이너 적하 시 발생할 수 있는 재취급 기대횟수에 미치는 영향을 연구하였다. 다수 선사의 다양한 유형의 공 컨테이너를 서로 분리된 공간에 저장한다면 저장 공간을 충분히 활용할 수 없고, 저장 공간의 활용도를 높이기 위해 여러 선사의 공 컨테이너를 혼적하여 함께 저장한다면 적하작업 중에 추가로 재취급이 발생할 수 있다. 한 베이에서 적하작업을 위하여 공 컨테이너를 인출하는 시점에 기대되는 재취급 횟수를 계산하기 위해 필요한 여러 가지 수식을 유도하였다. 트랜스퍼 크레인과 탑 핸들러를 취급 장비로 간주하여 다양한 인출 전략을 검토하였다. 장치장의 다양한 설계 및 운영 매개 변수가 재취급 횟수에 미치는 효과를 확인할 목적으로 수치실험을 수행하였다.