• 한국식품과학회지
• /
• 제20권6호
• /
• pp.868-872
• /
• 1988

잣을 저장조건을 달리하여 산화양상을 살펴보고 이어 정제단계별로 산화양상에 따른 변화를 살펴보았다. 잣을 $35^{\circ}C$에서 10주간 저장하면서 함유지방질의 산화양상을 살펴본 결과 잣 알갱이 상태는 조직을 마쇄하더라도 지방질로 추출한 상태보다 대단히 높은 산화안정성을 나타내었다. 또한 조지방질은 정제단계를 거칠수록 그 산화안정성이 감소되었으며 정제지방질, 탈검 및 탈산된 지방질, 탈검 탈산 및 탈색된 지방질, 탈검된 지방질, 조지방질 순으로 산화 안정성이 높아졌다. 이것은 정제단계에서 제거된 물질들이 산화 안정성을 증가시키는 요인으로 작용하는 것으로 여겨진다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.159-165
• /
• 2015

Motion control schemes are generally classified into three categories (point stabilization, trajectory tracking, and path following). This paper deals with the problem which is associated with the initial deployment of a group of Unmanned Surface Vehicle (USVs) and corresponding point stabilization. To keep the formation of a group of USVs, it is necessary to set the relationship between each vehicle. A forcing functions such as potential fields are designed to keep the formation and a graph Laplacian is used to represent the connectivity between vehicle. In case of fixed topology of the graph representing the communication between the vehicles, the graph Laplacian is assumed constant. However the graph topologies are allowed to change as the vehicles move, and the system dynamics become discontinuous in nature because the graph Laplacian changes as time passes. To check the stability in the stage of deployment, the system is modeled with Kronecker algebra notation. Filippov's calculus of differential equations with discontinuous right hand sides is then used to formally characterize the behavior of USVs. The stability of the system is analyzed with Lyapunov's stability theory and LaSalle's invariance principle, and the validity is shown by checking the variation of state norm.

• 대한물리의학회지
• /
• 제12권4호
• /
• pp.19-28
• /
• 2017

PURPOSE: The purpose of this study was to describe the Proprioceptive Neuromuscular Facilitation (PNF) Intervention strategy applied International Classification of Functioning, Disability and Health (ICF) Tool about strength, range of motion, scapular stability, pain and function of shoulder for patients with adhesive capsulitis. METHODS: The data was collected by patient with adhesive capsulitis. The patient was a 50-year-old male diagnosed with right shoulder with adhesive capsulitis. We applied the PNF Intervention strategy applied ICF Tool to patient with adhesive capsulitis. PNF interventions were consisting of such as combination of isotonic and stabilizing reversal technique and various positions. PNF interventions were applied, such as those aiming at decreasing pain and disability and increasing range of motion and function for the four weeks. Parameters of result were collected for strength, range of motion, scapular stability, pain and function of shoulder using the hand held dynamometer, goniometer, lateral scapula slide test, and shoulder pain and disability index, respectively. RESULTS: Clinical benefits were observed the patient with adhesive capsulitis for strength, range of motion, scapular stability, pain, and function of shoulder. The patient with adhesive capsulitis improved strength, range of motion, scapular stability, pain, and function of shoulder. CONCLUSION: Patient reported improved strength, range of motion, scapular stability, pain, and function of shoulder after intervention.

• 약학회지
• /
• 제38권6호
• /
• pp.637-645
• /
• 1994

The effect of various drugs on the stability of the liposomal membrane of phosphatidylcholine and cholesterol was studied, employing the fluorescence self-quenching method. Calcein was entrapped into the phospholipid small unilamellar vesicles and the leakage of the fluorescence probe was monitored on adding the drug to the system. The results of the experiments showed that phenothiazine derivatives, some potent local anesthetics and surface active agents were very effective in inducing the leakage of calcein from the liposome. The leakage-inducing activity of these drug substances has been ascribed to their surface activity and the perturbation of the liposomal membrane by these substances. On the other hand drug substance with low surface activity or without amphiphilic moieties did not show any effect or only small effect on the leakage of calcein from the liposomes. The effect of lipid concentration on the stability of the liposomes was also investigated to show that the higher concentrations of lipid more drug was required to induce the leakage. The effect of surface charges of vesicles was also studied, and the results showed that the charge on the liposomes enhanced the stability of the liposomes against the leakage-inducing activity of these drug substances.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• 한국재료학회지
• /
• 제16권2호
• /
• pp.137-143
• /
• 2006

The effects of Cu and Fe additions on the thermal stability, microstructure and mechanical properties of $Al_{85}-Ni_{8.5}-Mm_{6.5},\;Al_{84}-Ni_{8.5}-Mm_{6.5}Cu_1,\;Al_{84}-Ni_{8.5}-M_{m6.5}Fe_1$ alloys, manufactured by gas atomization, degassing and hot-extrusion were investigated. Gas atomization, with a wide super-cooled liquid region, allowed the alloy powders to exhibit varying microstructure depending primarily on the powder size and composition. Al hotextruded alloys consisted of homogeneously-distributed fine-grained fcc-Al matrix and intermetallic compounds. A substitution of 1 at.% Al by Cu increased the thermal stability of the amorphous phase and produced alloy microstructure with smaller fcc-Al grains. On the other hand, the same substitution of 1 at.% Al by Fe decreased the stability of the amorphous phase and produced larger fcc-Al grains. The formation of intermetallic compounds such as $Al_3Ni,\;Al_{11}Ce_3\;and\;Al_{11}La_3$ was suppressed by the addition of Cu or Fe. Among the three alloys examined, the highest Vickers hardness and compressive strength were obtained for $Al_{84}-Ni_{8.5}-M_{m6.5}Cu_1$ alloy, and related to the finest fcc-Al grain size attained from increased thermal stability with Cu addition.

• 폴리머
• /
• 제26권4호
• /
• pp.431-438
• /
• 2002

편광 푸리에 변환 적외선 분광법을 이용하여 액정 디스플레이의 배향막으로 널리 사용되는 폴리이미드 필름의 편광 자외선 조사에 따른 액정의 배향성과 열적 안정성을 연구하였다. 편광자외선이 조사된 폴리이미드의 경우, 조사된 편광자외선의 극성 방향에 평행한 폴리이미드 분자들의 우선적인 광분해 반응으로 인하여 편광자외선 조사 후 남아 있는 폴리이미드 분자들은 조사된 편광자외선 극성 방향과 수직 배향을 나타내었다. 하지만 러빙 처리된 폴리이미드 필름은 러빙 방향과 평행하게 폴리이미드 분자들의 재배향이 유도됨을 확인하였다. 또한 편광자외선이 조사된 폴리이미드 배향막이 편광자외선 조사를 통한 폴리이미드 분자들의 단편화 반응 때문에 러빙 처리된 폴리이미드 배향막 보다는 열적 안정성이 저하됨을 확인하였다.

• 대한조선학회지
• /
• 제26권1호
• /
• pp.1-10
• /
• 1989

본 연구에서는 추파중에 항행하는 선박의 전복현상과 관련된 횡복원성 문제를 다루었다. 추파중에서 항행하는 선박의 복원력 변동량을 이론적으로 규명하기 위해서 Froude-Krylov 가설과 파랑중에서의 정적 평형조건 등을 이용한 이론계산법을 정식화하였다. 그리고 본 이론계산법에 따라서 고속화물선 선형과 어선 선형에 대해서 복원력 변동량을 계산하였으며, 동일한 파랑조건하에서 실시된 Hamamoto의 모형실험 결과와 비교하였다. 상기 이론계산 결과 및 모형실험 결과로부터 추파의 파정에서 선체중심이 위치하였을 때 복원력이 평수중에 비해서 절반이하로 감소되며, 이때 전복의 위험이 있다는 것을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1091-1098
• /
• 1998

Thermal stability of the electroless deposited Cu thin film was investigated. Cu/TaN/Si multilayer was fabricated by electroless-depositing Cu thin layer on TaN diffusion barrier layer which was deposited by MOCVD on the Si substrate, and was annealed in $H_2$ ambient to investigate the microstructure of Cu film with a post heat-treatment. Cu thin film with good adhesion was successfully deposited on the surface of the TaN film by electroless deposition with a proper activation treatment and solution control. Microstructural property of the electroless-deposited Cu layer was improved by a post-annealing in the reduced atmosphere of $H_2$ gas up to $600^{\circ}C$. Thermal stability of Cu/TaN/Si system was maintained up to $600^{\circ}C$ annealing temperature, but the intermediate compounds of Cu-Si were formed above $650^{\circ}C$ because Cu element passed through the TaN layer. On the other hand, thermal stability of the Cu/TaN/Si system in Ar ambient was maintained below $550^{\circ}C$ annealing temperature due to the minimal impurity of $O_2$ in Ar gas.

• Structural Engineering and Mechanics
• /
• 제49권5호
• /
• pp.555-568
• /
• 2014

In this article, stability of composite conical shells subjected to dynamic external pressure is investigated by numerical and experimental methods. In experimental tests, cross-ply glass woven fabrics were selected for manufacturing of specimens. Hand-layup method was employed for fabricating the glass-epoxy composite shells. A test-setup that includes pressure vessel and data acquisition system was designed. Also, numerical analyses are performed. In these analyses, effect of actual geometrical imperfections of experimental specimens on the numerical results is investigated. For introducing the imperfections to the numerical models, linear eigen-value buckling analyses were employed. The buckling modes are multiplied by very small numbers that are derived from measurement of actual specimens. Finally, results are compared together while a good agreement between results of imperfect numerical analyses and experimental tests is observed.